Fujitsu Primergy RX300 S3 Bedienungsanleitung

PRIMERGY RX300 S3

Server

Options Guide

Edition April 2007

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected].

Certified documentation

according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

RX300 S3 Options Guide

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.1 Overview of the documentation . . . . . . . . . . . . . . . . . 7

1.2 Options and upgrade . . . . . . . . . . . . . . . . . . . . . 10

1.3 Notational conventions . . . . . . . . . . . . . . . . . . . . 12

2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3 Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . 15

4 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

4.1 Removing the server form the rack . . . . . . . . . . . . . . 21

4.2 Opening the server . . . . . . . . . . . . . . . . . . . . . . . 23

5 Main memory . . . . . . . . . . . . . . . . . . . . . . . . . . 25

5.1 Memory module population . . . . . . . . . . . . . . . . . . 25

5.2 Upgrading/replacing the main memory . . . . . . . . . . . . 28

6 Processors . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

6.1 Installing a second processor . . . . . . . . . . . . . . . . . 33

6.2 Replacing the processor . . . . . . . . . . . . . . . . . . . . 38

6.3 Replacing the processor heat sink . . . . . . . . . . . . . . 42

7 ROMB (RAID on Motherboard) . . . . . . . . . . . . . . . . 43

7.1 Installing the ROMB upgrade kit . . . . . . . . . . . . . . . 43

OptionsGuide RX300 S3

Contents

8 Accessible drives . . . . . . . . . . . . . . . . . . . . . . . . 47

8.1 Installing a FD drive . . . . . . . . . . . . . . . . . . . . . . . 48

8.2 Installing a LocalView module . . . . . . . . . . . . . . . . . 53

8.3 Installing the CD/ DVD-ROM drive . . . . . . . . . . . . . . . 57

8.4 Tape drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

9 PCI slots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

9.1 Installing a PCI controller in a low-profile slot . . . . . . . . . 66

9.2 Installing the PCI controller in the riser card . . . . . . . . . 68

10 External serial interface . . . . . . . . . . . . . . . . . . . . . 75

10.1 Installing the external serial interface . . . . . . . . . . . . . 75

11 Parallel interface . . . . . . . . . . . . . . . . . . . . . . . . . 83

11.1 Installing a parallel interface . . . . . . . . . . . . . . . . . . 83

12 Converting from low-profile to standard PCI Slots . . . . . . 91

12.1 Removing lp slot cage . . . . . . . . . . . . . . . . . . . . . 91

12.2 Converting the air duct . . . . . . . . . . . . . . . . . . . . . 94

12.3 Installing the riser . . . . . . . . . . . . . . . . . . . . . . . . 98

13 Completion . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

13.1 Closing the server . . . . . . . . . . . . . . . . . . . . . . . 101

14 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

14.1 Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

14.2 Configuration diagram . . . . . . . . . . . . . . . . . . . . 108

RX300 S3 Options Guide

Contents

14.2.1 Configuration with 3.5“ HDDs . . . . . . . . . . . . . . . . . . 108

14.2.2 Configuration with 2.5“ HDDs . . . . . . . . . . . . . . . . . . 109

14.3 Hard disk mirroring . . . . . . . . . . . . . . . . . . . . . . . 110

Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Related publications . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

OptionsGuide RX300 S3

Contents

RX300 S3 Options Guide 7

1 Introduction

The PRIMERGY RX300 S3 server is an Intel-based server for mid-size

networks and large companies. The server is suitable for use as a file server

and also as an application, information or Internet server.

The PRIMERGY RX300 S3 server offers a high level of reliability and availability

through highly developed hardware and software components. These include

hot-plug hard disk drive modules, redundant CPU fans, system fans and power

supply units, and hot-plug PCI slots, the ServerView Suite server management

software, „Prefailure Detection and Analysing“ (PDA) and „Automatic Server

Reconfiguration and Restart“ (ASR&R).

Security functions in the BIOS Setup and on the system board protect the data

on the server against manipulation. Additional security is provided by the

lockable rack door.

The rack model occupies 2 height units (HU) in the rack.

1.1 Overview of the documentation

IPRIMERGY manuals are available in PDF format on the ServerBooks

CD which is supplied in the ServerView Suite package for every server

system.

These PDF files can also be downloaded free of charge from the

Internet: at http://manuals.fujitsu-siemens.com you will find an overview

page with the online documentation available on the Internet. You can go

to the PRIMERGY Server documentation by clicking on “industry standard

servers”.

Concept and target groups

This Options Guide shows you how you can expand and upgrade the server.

IThe Operating Manual for the server describes how you install/remove

the hot-plug components.

The activities described in this manual may only be performed by specialist

personnel with technical training.

8 OptionsGuide RX300 S3

Overview of the documentation Introduction

Additional server documentation

To the PRIMERGY RX300 S3 documentation set belong the following additional

manuals:

– “Safety notes and other important information” manual (print version

supplied with the system, PDF file available on the ServerBooks DVD

supplied)

– “Returning used devices” manual (PDF file available on the ServerBooks DVD

supplied)

– “Warranty” manual (print version supplied with the system, PDF file available

on the ServerBooks DVD supplied)

– “PRIMERGY RX300 S3

Server Server Operating Manual“ (PDF file available on the ServerBooks

DVD)

– Technical Manual for the system board D2119 (PDF file available on the

ServerBooks CD)

– “BIOS Setup” (PDF file available on the ServerBooks DVD supplied)

– „ServerView Suite“ enthält die ServerStart-Disc 1, die ServerStart-Disc 2

und die ServerBooks-DVD. Die PDF-Version des Benutzerhandbuchs

„PRIMERGY ServerView Suite - ServerStart“ ist auf der ServerBooks-DVD

verfügbar.

IEine Ersatz-ServerBooks-DVD kann unter Angabe Ihrer Rechnerdaten

über folgende Email-Adresse bestellt werden: Reklamat-PC-

[email protected]

IIf you need a backup of the ServerBooks-CD send the details of your

server via email address: [email protected].

– “Global Array Manager Client Software User’s Guide” (PDF file available on

the ServerBooks DVD)

– “Global Array Manager Server Software User’s Guide” (PDF file available on

the ServerBooks DVD)

– “Integrated Mirroring User’s Guide” (PDF file available on the ServerBooks

DVD)

IIf you need a backup of the ServerBooks-DVD send the details of your

server via email address: [email protected].

Further sources of information:

– technical manual for the rack

– manual for the monitor

– server management manual ServerView

RX300 S3 Options Guide 9

Introduction Overview of the documentation

– manual for the Remote Test and Diagnostic System RemoteView

– in the documentation for the boards and drives

– operating system documentation

– information files of your operating system

(see also chapter “Related publications” on page 117)

10 OptionsGuide RX300 S3

Options and upgrade Introduction

1.2 Options and upgrade

Second processor

The system board can be upgraded with a second processor. Only processors

of the same type may be used on the system board. The second processor must

have the same clock frequency and the same cache as the first processor.

Upgrading of the main memory

The eight slots for the main memory are suitable for FBD533/PC2-4200F or

FBD667/PC2-5300 Fully Buffered DIMM memory modules. The organization in

two memory banks, 1 and 2 with 4 memory modules each, permits rapid

memory access with four-way interleaving.

Memory modules must always be incorporated in pairs.

ROMB (RAID on motherboard)

The System is extended with an on board Intel I/O processor. If the controller is

activated, it supports RAID Level 0, 1, 10, 5 and 50. "MegaRaid PCI Express™

ROMB" can be activated with two different upgrading kits.

Additional accessible drives

One 5.25-inch bay and one 3,5-inch bay are available for accessible drives.

The 5.25-inch bay can be installed with a 3.5 inch x 0.5 inch floppy disk drive or

a LocalView module and the other bay can be installed with a 5.25-inch x 0,5

inch DVD-ROM drive.

Only for a 3.5“ HDD variant a tape drive can be installed optionally in the left

drive cage (see also the configurator under “Related publications” on

page 117). Two mounting locations are occupied as a result in the drive cage

which are then no longer available for HDD modules.

Andere Handbücher für Primergy RX300 S3

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu PRIMERGY CX272 S1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY 300 Bedienungsanleitung

Fujitsu

Fujitsu BS2000 SE Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX300 S6 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Service-Handbuch

Fujitsu

Fujitsu SPARC ENTERPRISE T1000 Technisches Handbuch

Fujitsu

Fujitsu SPARC Enterprise M3000 Service-Handbuch

Fujitsu

Fujitsu PRIMERGY RX1330 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY CX25 0 M4 Series Montageanleitung

Fujitsu

Fujitsu Primergy TX300 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX150 S8 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX924 S3 Bedienungsanleitung

Fujitsu

Fujitsu Primepower200 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 3800E2 Bedienungsanleitung

Fujitsu

Fujitsu Primergy CX270 S2 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M5000 Installationsanleitung

Fujitsu

Fujitsu PRIMERGY TX2540 M1 Bedienungsanleitung

Fujitsu

Fujitsu SE700 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX620 S5 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX1330 M4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX120 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY MX130 S1 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung