Fujitsu PRIMERGY TX300 S3 Bedienungsanleitung

PRIMERGY

PRIMERGY TX300 S3

Server

Options Guide

Susanne Däschlein

Fujitsu Siemens Computers GmbH

München

81730 München

e-mail: email: [email protected]

Tel.: (089) 61001155

Fax: (++49) 700 / 372 00000

TX300 S3

Sprachen: En

Edition July 2006

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Fax forms for sending us your comments are included in

the back of the manual.

There you will also find the addresses of the relevant

User Documentation Department.

Certified documentation

according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

TX300 S3 Options Guide

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.1 Overview of the documentation . . . . . . . . . . . . . . . . . . 5

1.2 Extensions and conversions . . . . . . . . . . . . . . . . . . . . 6

1.3 Notational conventions . . . . . . . . . . . . . . . . . . . . . . 8

2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3 Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4.1 Floorstand model . . . . . . . . . . . . . . . . . . . . . . . . 17

4.1.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . . 17

4.1.2 Removing the front cover . . . . . . . . . . . . . . . . . . . . 18

4.2 Rack model . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

4.2.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . . 20

4.2.2 Removing the rack front cover . . . . . . . . . . . . . . . . . . 23

5 Main memory . . . . . . . . . . . . . . . . . . . . . . . . . . 25

5.1 Equipping rules . . . . . . . . . . . . . . . . . . . . . . . . . 25

5.2 Extending/replacing the main memory . . . . . . . . . . . . . 27

6 Processors . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

6.1 Installing a second processor . . . . . . . . . . . . . . . . . . 31

6.2 Replacing the processor . . . . . . . . . . . . . . . . . . . . 40

6.3 Replacing the heat sink . . . . . . . . . . . . . . . . . . . . . 42

7 ROMB (RAID on motherboard) . . . . . . . . . . . . . . . . 45

7.1 Installing the ROMB upgrade kit . . . . . . . . . . . . . . . . . 45

8 Accessible drives . . . . . . . . . . . . . . . . . . . . . . . 47

8.1 Installing an accessible 5.25-inch drive . . . . . . . . . . . . . 47

8.2 Installing a slimline CD/DVD drive . . . . . . . . . . . . . . . . 52

8.3 Installing a slimline floppy disk drive . . . . . . . . . . . . . . 56

8.4 Installing a LocalView module . . . . . . . . . . . . . . . . . . 59

8.5 Installing the FDD-DVD-LocalView box . . . . . . . . . . . . . 61

8.6 Installing the SAS/SATA HDD extension box . . . . . . . . . . 62

9 Controller in non-hot-plug PCI slots . . . . . . . . . . . . . 67

9.1 Installing a controller . . . . . . . . . . . . . . . . . . . . . . 68

10 Parallel interface for printers . . . . . . . . . . . . . . . . . 71

10.1 Installing a parallel interface . . . . . . . . . . . . . . . . . . . 71

Options Guide TX300 S3

Contents

11 Converting from the floorstand model to the rack model . . 75

12 Completion . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

12.1 Floorstand model . . . . . . . . . . . . . . . . . . . . . . . . 79

12.1.1 Attaching the front cover . . . . . . . . . . . . . . . . . . . . 79

12.1.2 Closing the server . . . . . . . . . . . . . . . . . . . . . . . . 81

12.2 Rack model . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

12.2.1 Attaching the rack front cover . . . . . . . . . . . . . . . . . . 82

12.2.2 Closing the server . . . . . . . . . . . . . . . . . . . . . . . . 83

13 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

13.1 Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Related publications . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

TX300 S3 Options Guide 5

Introduction Overview of the documentation

1Introduction

The PRIMERGY TX300 S3 Server is an Intel-based server for medium-sized

and large networks. The server is suitable for use as a file server as well as an

application, information, or Internet server. It is available as a floorstand or rack

model. The floorstand model can be converted to a rack model using an optional

conversion kit.

1.1 Overview of the documentation

IPRIMERGY manuals are available in PDF format on the ServerBooks

CD which is supplied in the ServerView Suite package for every server

system.

These PDF files can also be downloaded free of charge from the

Internet: at http://manuals.fujitsu-siemens.com you will find an overview

page with the online documentation available on the Internet. You can go

to the PRIMERGY Server documentation by clicking on industry standard

servers.

Concept and target groups

This Options Guide shows you how you can expand and upgrade the server.

IThe Operating Manual for the server describes how you install/remove

the hot-plug components.

The activities described in this manual may only be performed by technical

specialists.

Additional documentation about the server

The PRIMERGY TX300 S3 documentation comprises the following additional

manuals:

– The “Safety notes and other important information” manual (printed copy

always supplied with the server, and available as a PDF file on the

ServerBooks CD supplied)

– The “Guarantee” manual (printed copy always supplied with the server, and

available as a PDF file on the ServerBooks CD supplied)

– The “Returning used devices” manual (PDF file available on the ServerBooks

CD)

6 Options Guide TX300 S3

Extensions and conversions Introduction

– The Operating Manual for PRIMERGY TX300 S3 (PDF available on the

ServerBooks CD supplied)

– The Technical Manual for the system board D2129(PDF available on the

ServerBooks CD supplied)

– The “BIOS Setup” manual (PDF available on the ServerBooks CD supplied)

– The “PRIMERGY ServerView Suite - ServerStart” manual (printed copy

always supplied with the server, and available as PDF file on the ServerBooks

CD supplied)

– The “Global Array Manager Client Software User’s Guide” (PDF available on

the ServerBooks CD supplied)

– The “Global Array Manager Server Software User’s Guide” (PDF available

on the ServerBooks CD supplied)

– The “Integrated Mirroring User’s Guide” (PDF available on the ServerBooks

CD supplied)

IYou can order a supplementary ServerBooks CD by sending an e-mail to

the following address, quoting your server data:

Reklamat-PC-LO[email protected]

Further sources of information:

– Technical Manual on the relevant rack

– Manual on the monitor

– Manual on ServerView Server Management

– Manual on RemoteView Remote Server Maintenance

– Manual on LocalView

– Documentation on boards and drives

– Documentation on your operating system

– Information files on your operating system

(see also “Related publications” on page 101)

1.2 Extensions and conversions

Second processor

The system board can be upgraded with a second processor. Only processors

of the same type may be used on the system board. The second processor must

have at least the same clock frequency as the first processor.

TX300 S3 Options Guide 7

Introduction Extensions and conversions

Extension of the main memory

The eight slots for the main memory are suitable for FBD533/PC2-4200F or

FBD667/PC2-5300F Fully Buffered DIMM memory modules. The organization

in four memory banks, 1 to 4, permits rapid memory access with two-way inter-

leaving.

Memory modules must always be incorporated in pairs. A memory bank must

always be equipped fully with the same type of memory modules.

ROMB (RAID on motherboard)

The on-board SAS RAID controller can be upgraded to a RAID5 (RAID 0, 1, 5,

10, 50) controller with a "MegaRaid ROMB SAS" upgrade kit. In this case the

the RAID5 funtionality is activated by installing a license key and a cache

module.

RemoteView

RemoteView provides you with a comprehensive test and diagnostics package.

The relevant hardware components are integrated on the system board.

Additional accessible drives

Three free 5.25-inch bays are available for accessible drives.

In the third 5.25-inch bay a DVD-ROM drive or a multibay (FDD-DVD-LocalView

box) can be installed. The multibay can be equipped with a slimline floppy disk

drive, a slimline DVD-ROM drive and a LocalView module.

In the second and the third 5.25-inch bay a SAS/SATA HDD extension box can

be installed. This SAS/SATA HDD extension box can be equipped with a slimline

floppy disk drive (or a LocalView module), a slimline DVD-ROM drive and two

SAS/SATA hard disks.

LocalView module (alphanumeric system display)

The LocalView module provides you with the option of displaying system infor-

mation and hardware system faults alphanumerically. This is an intelligent

module with a micro controller and its own memory, which functions indepen-

dently of the server system.

8 Options Guide TX300 S3

Notational conventions Introduction

The LocalView module consists of an LCD display panel and a toggle switch,

both accommodated in a suitable mount. The mechanical mechanism used

allows the LCD display panel to be pulled out and flapped out. Further infor-

mation on operating the display modes are provided in the documentation on

the LocalView module.

Additional controllers in non-hot-plug PCI slots

The system board offers five PCI slots. Slots 1, 2 and 5 are non-hot-plug PCI

slots.

PCI slots 3 and 4 are hot-plug PCI slots which can be equipped with controllers

that have hot-plug capability (the hot-plug PCI slots are described in the

Operating Manual).

Parallel interface for printers

As an option, a parallel interface can be provided for printers.

Conversion of the floorstand model to a rack model

The floorstand model can optionally be converted so that the server can be

integrated into the common rack systems.

1.3 Notational conventions

The following notational conventions are used in this manual:

Text in italics indicates commands, menu items or software programs.

„Quotation marks“ indicate names of chapters and terms that are being

emphasized.

Êdescribes activities that must be performed in the order

shown.

VCAUTION! pay particular attention to texts marked with this symbol.

Failure to observe this warning may endanger your life,

destroy the system or lead to the loss of data.

Iindicates additional information, notes and tips.

Table 1: Notational conventions

TX300 S3 Options Guide 9

2Procedure

VCAUTION!

The actions described in these instructions should only be performed by

technical specialists. Equipment repairs should only be performed by

authorized, qualified staff. Any unauthorized opening and improper

repairs could expose the user to risks (electric shock, energy hazards,

fire hazards) and could also damage the equipment. Please note that

any unauthorized opening of the device will result in the invalidation of

the warranty and exclusion from all liability.

ÊFirst of all please familiarize yourself with the safety instructions in the

section chapter “Safety notes” on page 11ff.

ÊEnsure that all required manuals (see “Additional documentation about the

server” on page 5) are available, printing out the PDF files if necessary. You

will definitely need the Operating Manual for the server and the Technical

Manual for the system board.

ÊShut down the server correctly, switch it off, pull out the power plug, and

open the server as described in the chapter “Preparation” on page 17ff.

ÊExtend or upgrade your server as described in the relevant chapter.

IThe Operating Manual for the server describes how you

install/remove the hot-plug components.

IProcedures which are identical for the floorstand and rack models are

only described for the floorstand model.

ÊClose the server, connect it to the power outlet, and switch it on as described

in the chapter “Completion” on page 79ff.

ÊStart the operating system and, if necessary, configure it as required (see

the Operating Manual).

Andere Handbücher für PRIMERGY TX300 S3

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu SPARC M12 Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS LT160 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX2450 M1 Bedienungsanleitung

Fujitsu

Fujitsu Primergy TX300 S4 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX100 S3 Leitfaden

Fujitsu

Fujitsu PRIMERGY RX2540 M1 Bedienungsanleitung

Fujitsu

Fujitsu BS2000 SE Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX1330 M4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY CX2550 M1 Bedienungsanleitung

Fujitsu

Fujitsu l ETERNUS AF Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX140 S2 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX1330 M4 Bedienungs- und Montageanleitung

Fujitsu

Fujitsu PRIMERGY Econel 50 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY RX2520 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX100 S1 Betriebsanleitung

Fujitsu

Fujitsu SPARC Enterprise T2000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX924 S2 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX200 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX140 S2 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX300 S8 Bedienungsanleitung

Fujitsu

Fujitsu SPARC M10-1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX900 S2 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX620 S4 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M4000 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung