Gametime 53 Bedienungsanleitung

BY: GAMETIME®

REVISED: 08/09/01

4627

FITKID

PARALLEL BAR

NOTE: 4627 2'-6" PARALLEL BAR

4628 3' PARALLEL BAR

4629 3'-4" PARALLEL BAR

4630 3'-6" PARALLEL BAR

4631 3'-10" PARALLEL BAR

4632 4'-2" PARALLEL BAR

4633 4'-6" PARALLEL BAR

SPECIFICATIONS

PARALLEL BAR:Shall be 1-7/8" O.D.

11 gauge (.120") wall galvanized steel

pipe. The bar shall have a powder coat

finish.

SPECIFICATIONS:GAMETIME®has a

policy of continuous improvement

and reserves the right to discontinue

or change specifications without

notice.

qCheck for and repair damage caused by wear or vandalism,

a major factor in injury-causing situations.

qGAMETIME®PROVIDES ITS CUSTOMERS WITH COMPLETE

SPECIICATION SHEETS AND INSTALLATION INSTRUCTIONS. THE

SPECIFICATION SHEET CONTAINS THE LISTING OF EVERY PART USED

IN APIECE OF EQUIPMENT AND SHOULD BE KEPT IN THE CUSTOMER'S

FILES FOR ACCURATE REFERENCE WHEN REPLACEMENT PARTS

ARE NEEDED.

qNever add components not intended for use with this

product.

qProper maintenance of GAMETIME® equipment requires

regular tightening of all bolts, nuts, and set screws.

qNever use GAMETIME®playground equipment around or in

conjunction with swimming pools, ponds, lakes or any other

bodies of water.

REF. NO. REQ'D. PART WEIGHT EA.

NO. DESCRIPTION NO. LBS. KGS.

1Parallel Bar 2000000 158533 45.15 20.48

1Parallel Bar 0200000 158865 47.43 21.51

1Parallel Bar 0022222 158530 49.02 22.23

2Extension 6" [15.00 cm] 0004000 158868 1.14 .51

2Extension 10" [25.00 cm] 0000400 158535 1.90 .86

2Extension 1'-2"[36.00 cm] 0000040 158536 2.66 1.20

2Extension 1'-6"[46.00 cm] 0000004 158537 3.42 1.55

Hardware Complete 0001111 159032 .76 .34

3/8" x 2" B.H.C.S. 0008888 811055* .09 .04

3/8" Lockwasher 0008888 817334* .01 .01

3/8" Tee-Nut (Spanner) 0008888 804556* .03 .01

UNLESS OTHERWISE SPECIFIED, ALL UNITS OF MEASURE ARE EACH

*INCLUDED IN HARDWARE

REPLACEMENT PARTS

4627 4628 4629 4630 4631 4632 4633

1'-6" [45.72 cm]

DIA. x 2'-6" [76.20 cm]

DEEP (4 PLACES) GROUND PLAN

NOTE: HOLE DEPTHS INDICATED ON ALL

GROUND PLANS ARE MEASURED FROM THE

FINISHED SURFACE. SEE FOOTING DETAILS.

ALL FOOTING DIMENSIONS ARE BASED ON

LEVEL FINISHED SURFACE.

CONCRETE REQUIREMENT

.39 CUBIC YARDS

[.30 CUBIC METERS)

LEGEND

PART REFERENCE

9'-10-1/8" [299.97 cm]

DIM. 'B' DIM. 'A'

DETAIL "B"

1'-0" [30.48 cm]

EARTH

SHOCK ABSORBING PROPERTIES OF SURFACING

MATERIALS VARY. IFYOU DETERMINE THAT LESS

THAN 1'-0" [30.48 CM] OF SURFACING IS REQUIRED,

MAKE UPTHE DIFFERENCE IN ELEVATION WITH

EARTH, BEFORE APPLYING SURFACING.

SUGGESTED MINIMUM CONCRETE RATING: 3000 PSI

SLOPED FOOTING IS AREQUIREMENT OF EUROPEAN

STANDARD EN1176-1.

DETAIL "A"

CONCRETE

45OMIN.

CONCRETE

EARTH

1'-0" [30.48 cm]

EARTH

FINAL NO. DIM. 'A' DIM. 'B' DIM. 'C'

4627 1'-1-7/8" [35.31 cm] 9'-10-15/16" [302.04 cm] 2'-6" [76.20 cm]

4628 1'-3-7/8" [40.39 cm] 9'-11-3/16" [302.68 cm] 3'-0" [91.44 cm]

4629 1'-5-7/8" [45.47 cm] 9'-11-7/16" [303.40 cm] 3'-4" [101.60 cm]

4630 1'-7-7/8" [50.55 cm] 9'-11-3/4" [304.20 cm] 3'-6" [106.68 cm]

4631 1'-9-7/8" [55.63 cm] 10'-0-1/8" [305.09 cm] 3'-10" [116.84 cm]

4632 1'-11-7/8" [60.71 cm] 10'-0-1/2" [306.05 cm] 4'-2" [127.00 cm]

4633 2'-1-7/8" [65.79 cm] 10'-0-15/16" [307.10 cm] 4'-6" [137.16 cm]

DIM. 'A'

DIM. 'C'

1'-6" [45.66 cm]

TYPICAL

DIM. 'A'

DIM. 'C'

1'-6" [45.66 cm]

DIAMETER (TYPICAL)

3.9"[10.00 cm]

MAX.

1'-6" [45.72 cm]

3.9"[10.00 cm]

MAX.

EARTH

FINISHED

SURFACE

BRICK OR

EQUIVALENT

DIMENSIONED

TO TOP OF

BRICK OR

EQUIVALENT

FINISHED

SURFACE

BRICK OR

EQUIVALENT

DIMENSIONED

TO TOP OF

BRICK OR

EQUIVALENT

1'-6" [45.72 cm]

SEE DETAIL 'C'

NOTE:Do not overtighten bolts. To overtighten may

cause buckling or dimpling of some parts.

NOTE:Read installation instructions thoroughly before

starting assembly. Pour concrete only after final

assembly is completed. Bracing material is required

during assembly.

NOTE:Assembly and leveling time will be greatly

reduced if a transit is used to set location and depth

of ground holes.

NOTE:Place a brick or equivalent at the bottom of

ground holes (where shown), to provide a solid

foundation. Allow for this in the hole depth.

STEP 1: Dig holes according to Ground Plan. NOTE:Due

to extremes in weather and soil conditions, hole

size may have to be increased to meet local conditions.

SET-UP INSTRUCTIONS

STEP 2: Attach the Extensions (if required) to

the Parallel Bars using Detail 'C'. Place Parallel Bars

into holes making sure they rest on the brick.

STEP 3: Level Parallel Bars using sway bracing.

NOTE:It is recommended that 2" x 4" braces be cut

the same lengths as the distance between each set of

Parallel Bars noted on Assembly Drawing. Use the

braces between bars to hold distance until concrete is

poured and cured.

STEP 4: Pour concrete according to the footing details.

Allow 48 hours minimum for concrete to harden

before using and removing sway braces.

NOTE:Use loctite (supplied by others) on all threaded

hardware.

DETAIL "C"

3/8" x 2" B.H.C.S.

(811055)

3/8" LOCKWASHER

(817334)

3/8" TEE-NUT

(SPANNER)

(804556)

EXTENSION

PARALLEL

BAR

ASSEMBLY DRAWING

10'-0" [3.05 M]

TOP VIEWS

SCALE: 1"=10'-0" [1:120]

4627 4628

4629 4630

4631 4632

4633

1'-3-13/16" [.40 M] 1'-5-13/16" [.45 M]

1'-7-13/16" [.50 M] 1'-9-13/16" [.55 M]

1'-11-13/16" [.60 M] 2'-1-13/16" [.66 M]

2'-3-13/16" [.71 M]

10'-0" [3.05 M]

10'-0" [3.05 M] 10'-0" [3.05 M]

10'-0" [3.05 M]





INSTALLATION

PARTS LIST

DETAIL

REFERENCE

=



 







A Company

ASSEMBLY DRAWING

8'-2 1/16" [249.02 cm]

1'-5 11/16" [44.95 cm]

TOP VIEW

1'-6 1/4" [46.40 cm]

EACH END

2'-1 7/16" [64.57 cm]

1'-6" [45.72 cm]

FINISHED

SURFACE

FINISHED

SURFACE

5'-0" [152.40 cm]

6'-7 1/8" [200.95 cm]

0'-7 7/8" [19.97 cm]

5'-1 15/16" [157.35 cm] 1'-3 7/16" [39.14 cm]

1'-2" [35.56 cm] X

2'-6" [76.20 cm] DEEP

(5 REQUIRED)

GROUND PLAN

END ELEVATION

SIDE ELEVATION

NOTES:

1.) HOLE DEPTHS

INDICATED ON ALL

GROUND PLANS ARE

MEASURE FROM THE

FINISHED SURFACE. SEE

DETAIL 321. ALL

FOOTING DIMENSIONS

ARE BASED ON LEVEL

FINISHED SURFACE.

2.) CONCRETE REQUIRED:

.30 CUBIC YARDS [.23

CUBIC METERS].

E05

321

E04

321

E05

2 PAGE

PARTS LIST

PART NUMBER

QTYDESCRIPTION

ITEM

147862

BENCH LEG (3'-11 1/2" [120.65cm])1

1601881

PUNCHED STEEL BENCH ASS'Y

1760891FOOTRAIL ASS'Y3

202095**

SIT-UP STATION SIGN

2120941

HARDWARE COMPLETE

135038*

1/2" ANCHOR ROD (1'-0" [30.48cm])

811051*

3/8" x 1 1/4" B.H.C.S.

817424*

3/8" FLAT WASHER (1 1/4" O.D.)

817334*

3/8" LOCKWASHER

804053*63/8" HEX NUT

INSTALLATION INSTRUCTIONS

1.) Before starting assembly, review the General

Installation Instructions at the beginning of this Installation

Guide and the Typical Assembly Details in the back.

2.) Determine proper location for Sit-Up Station.

Refer to Equipment Layout Plan provided and any

applicable project site drawings.

3.) Dig footings for bench supports. Maintain footing

spacing, size and depth as indicated on the ground plan.

Refer to Detail 321. Allow for depth of desired Finished

Surface.

4.) Attach four legs to the bench. Refer to Detail E04.

5.) Attach footrail assembly to bench. See Detail E05.

6.) Position assembled bench in footings; align, plumb,

and brace bench in place. Pour concrete as shown on

Detail 321. Be sure to hold top of concrete footing 0'-6"

[15.24cm] down from the Finished Surface. Slope top of

concrete for proper drainage.

7.) Refer to Sign Frame Installation Sheet for instructions

on Sign mounting.

8.) Allow concrete a minimum of 48 hours to cure and

harden before using bench.

SPECIFICATIONS

BENCH LEG: Shall be made of 1-7/8" O.D. galvanized

pipe.

BENCH ASSEMBLY: Shall be fabricated of punched

steel metal with a plastisol coating.

FOOTRAIL ASSEMBLY: Shall be an all-welded

construction fabricated of 3-1/2" O.D. (13 gauge)

galvanized pipe, 1-5/16" O.D. galvanized pipe, 3/16" x 3"

H.R. flat steel, and galvanized pipe cap. Final assembly

shall also include cast aluminum caps and self-sealing

pop rivets.

FINISH: The Bench Legs, Footrail Assembly and

Handrail Assembly shall all have a powder coat finish.

HARDWARE: All nuts, bolts, screws, inserts, and

lockwashers used in the assembly of all play equipment,

shall be stainless steel, yellow dichromate plated steel,

blue-coat plated steel, mechanically galvanized or powder

coated/yellow dichromate plated steel. All primary

fasteners shall be 300 series stainless steel. Fasteners

with yellow dichromate treatment have an electro

deposited, 99.9% pure zinc substrate applied from a

specially formulated solution sealed with a yellow

dichromate top coat designed to work in conjunction with

the zinc plating. Yellow dichromate has a 320% longer

life to white corrosion and 275% longer to red corrosion

than does hot-dip galvanizing.

SPECIFICATIONS: GAMETIME® has a policy of

continuous improvement and reserves the right to

discontinue or change specifications without notice.

* Included in Hardware

Warning: During Installation, Hardware And Small Parts Are Choking Hazards

For Young Children. Store Unused Parts Appropriately Until Assembly Is Completed.

Once Assembly Is Completed, Remove Any Unused Parts From The Play Environment

And Dispose/Save Them In A Secure Location.

Unless Otherwise Specified, All Units of Measure are Each

Note: Peen Tee-Nuts and Flatwashers to match radius of pipe after assembly is complete.

**Sign Frame with Hardware Sold Separately

Inhaltsverzeichnis

Andere Gametime Fitnessgeräte Handbücher

Gametime

Gametime THRIVE 900 Bedienungsanleitung

Beliebte Fitnessgeräte Handbücher anderer Marken

NSD

NSD PB-188P Bedienungsanleitung

Performance

Performance HyperVibe Bedienungsanleitung

Scalamobil

Scalamobil S27 Bedienungsanleitung

Precor

Precor Experience Series Bedienungsanleitung

FYTTER

FYTTER RedMIUM BENCH BE-T6R Bedienungsanleitung

Taurus

Taurus TF-RK1312 Bedienungsanleitung

Nustep

Nustep T5 Bedienungsanleitung

Precor

Precor CW-507 Bedienungsanleitung

Movement

Movement BICEPS Idea Bedienungsanleitung

Kegel8

Kegel8 V For Men Bedienungsanleitung

Skandika

Skandika Styrke II Bedienungsanleitung

BLK BOX

BLK BOX 21-0122-0B Bedienungsanleitung

Stamina

Stamina aeropilates premier 299 Bedienungsanleitung

SPORTSTECH

SPORTSTECH PBX300 Bedienungsanleitung

ParaBody

ParaBody Serious Steel 877102 Bedienungsanleitung

Weslo

Weslo Gym 650 Bedienungsanleitung

Rebel

Rebel ACTIVE RBA-1011 Bedienungsanleitung

4iiii

4iiii FLiiiight Bedienungsanleitung