Gamma+ Starburst 7x18w Bedienungsanleitung

Starburst 7x18w

7x18w RGBWA+UV LED Par

User Manual

Starburst 7x18w Par – GAMMA LED Vision

Page 1 of 11

Table of Contents

1. Introduction and Setup......................................................................................................................3

Unpacking...............................................................................................................................................3

In the Box:..........................................................................................................................................3

Mounting and Operation..................................................................................................................3

Safety Precautions...............................................................................................................................3

Customer Support...............................................................................................................................5

2. Setup and Operation..........................................................................................................................6

Using the LCD Menu and Buttons...............................................................................................6

Menu Operation...................................................................................................................................6

DMX Setup..............................................................................................................................................7

DMX Basics........................................................................................................................................7

DMX Wiring.......................................................................................................................................7

DMX Modes and Configuration.....................................................................................................8

Setting the DMX Address:................................................................................................................9

3. Maintenance.........................................................................................................................................10

Troubleshooting Problems............................................................................................................10

4. Technical Specifications...................................................................................................................11

Photometric Reports........................................................................................................................11

Starburst 7x18w Par – GAMMA LED Vision

Page 2 of 11

1. Introduction and Setup

Unpacking

After receiving the device, please check whether any visible damage was caused dur-

ing transport. lf the power cord, housing or the light are damaged, do not operate the

device. Contact your dealer or GAMMA LED Vision immediately.

Thank you for choosing our Starburst Par. This light is designed by high strength die-

casting aluminum which is able to endure high temperatures, and is designed in a

stylish form.

It uses high power Red, Green, Blue, White, Amber, and UV LED’s for, low power con-

sumption, high brightness, and excellent colors. The Starburst par features DMX512

control, standalone, and sound-active modes.

For your own safety, please read this manual before installing or using the device. This

manual covers the important information on installation and applications. Please install

and operate the fixture with following instructions. Meanwhile, please keep this manual

for future needs.

In the Box:

Starburst Par LED - 1 pc

Power Cable - 1 pc

Wireless IR Remote - 1 pc

User Manual - 1 pc

Mounting and Operation

Use a clamp rated for the full weight of the Starburst Par to hang the fixture from the

mount(s) on the fixture’s yoke.

As an added safety measure be sure to attached at least one properly rated safety

cable to the fixture using on of the safety cable rigging point integrated in the base

assembly or on the yoke.

Safety Precautions

Caution: For added protection mount the fixtures in areas outside walking paths, seat-

ing areas, or in areas were the fixture might be reached by unauthorized personnel.

Starburst 7x18w Par – GAMMA LED Vision

Page 3 of 11

Before mounting the fixture to any surface, make sure that the installation area can

hold a minimum point load of 10 items the device’s weight.

Fixture installation must always be secured with a secondary safety attachment, such

as an appropriate safety cable.

Never stand directly below the device when mounting, removing, or servicing the fix-

ture.

From a ceiling, or set on a flat level surface (see illustration below). Be sure this fixture

is kept at least 0.5m (1.5ft) away from any flammable materials (decoration etc.).

Always use and install the supplied safety cable as a safety measure to prevent acci-

dental damage and/or injury in the event the clamp fails.

∙Don’t try to modify the fixture without any instruction by the manufacturer or the ap-

pointed repairing agencies.

∙Warranty is voided if there are any malfunctions from not following the user manual

while operating or any hazardous operation, like shock short circuit, electronic shock,

lamp broken, etc.

Allow the Starburst Par LED to cool for at least 15 minutes before handling after use.

Starburst 7x18w Par – GAMMA LED Vision

Page 4 of 11

Customer Support

WARRANTY POLICY

GAMMA LED Vision warrants its products for the periods set below from the date

of purchase to be free of manufacturer and workmanship defects. Warranty does

not cover normal wear and tear caused by force, negligence or misuse of products.

GAMMA LED Vision is not responsible for any damages or injury caused by misuse

or improper handling of the products and in accordance with instructions and

specifications of manual.

Warranty terms are as follows:

LED Fixtures:

Indoor: 2 Years

Outdoor (IP 54 or higher): 1 Year

Lamp Fixtures: 1 year / excludes the lamp

LED Video Products:

Indoor: 2 Years

Outdoor (IP 54 or higher): 1 Year

Controllers: 2 years

Batteries: 6 months

All Trussing Related Products and Accessories: 1 Year

Please visit WWW.GAMMALEDVISON.COM for complete Limited Warranty terms

and contact information.

Starburst 7x18w Par – GAMMA LED Vision

Page 5 of 11

2. Setup and Operation

Using the LCD Menu and Buttons

MENU: Access the menu

DOWN: Lower the selected value.

UP: Increase the selected value

ENTER: Confirm/Store the Current Selection.

Menu Operation

Use the Menu Key to enter the menu. The chart below shows the main options and

explains the settings:

Display Value Function

d001 001- 512 DMX512 address setting for 6-channel mode

A001 001- 512 DMX512 address setting for 10-channel

mode

R255 000-255 Red

G255 000-255 Green

B255 000-255 Blue

W255 000-255 White

A255 000-255 Amber

P255 000-255 UV

FF00 000-255 Strobe: speed from slow to fast

CL01 000-255 15 static color selections

CC01 01-08 Color Change: speed from slow to fast

DE01 01-99 Color Fade: speed from slow to fast

CP01 01-99 Color Pulse: speed from slow to fast

Starburst 7x18w Par – GAMMA LED Vision

Page 6 of 11

SU01 00-08 Sound control: Sensitivity from low to high.

09 Sound Color Change

DMX Setup

DMX Basics

DMX512 stands for digital multiplex 512. This means that 512 channels are con-

trolled digitally through 1 data cable.

A channel is a set of 255 steps that are assigned to control attributes in each light.

This may be a color like red, green or blue, and intensity, strobe, pan/tilt or other

attributes.

Multiple sets of 512 “universes” may be used. Only 1 universe will travel on a DMX

cable, but through networked DMX (Art-Net or sACN E1.31), many universes can

travel over a network.

DMX Wiring

DMX works by connecting 1 or multiple lights to the output of a DMX lighting

console or software with a DMX interface.

DMX lights connect in what is called a “daisy-chain”. Your first DMX cable will

plug it’s male DMX connector into the female DMX connector on your lighting

console. The remaining female connector will then connect to the DMX input on

your first light.

You may then connect your next fixture to the output of your first light, and con-

tinue the chain.

32 Fixture Rule – DMX only allows you to connect up to 32 fixtures in a single

daisy chain for signal strength. Sometimes, depending on the fixtures and cable

length, this number is less (or more).

Starburst 7x18w Par – GAMMA LED Vision

Page 7 of 11

DMX Cables can be 3-pin or 5-pin. These use the same type of data, and in the 5-

pin only pins 1, 2, and 3 are used. The cable should be a 2 conductor, shielded

cable of at least 110 ohms resistance. Microphone cable is not DMX cable.

Please refer to the diagram below:

For installations where the DMX cable has to run a long distance or is in an elec-

trically noisy environment, it is recommended to use a DMX terminator. This

helps in preventing corruption of the digital control signal by electrical noise and

reflections. The DMX terminator is simply an XLR plug with a 120 Ω resistor con-

nected between pins 2 and 3, which is then plugged into the output XLR socket

of the last fixture in the chain. Please see illustrations below:

DMX Modes and Configuration

The Starburst Par has multiple DMX modes, sometimes called “personalities”, “pro-

files”, or as we will use here “modes”.

In general, modes with more DMX channels offer a greater level of control or op-

tions but take up more of your output channels on your lighting console or soft-

ware.

Modes with less DMX channels often offer less control, but may be plenty for your

needs.

Depending on your needs and control solution, you may not need chan-

nels for automated programs, strobes, or macros – your console may have great

Starburst 7x18w Par – GAMMA LED Vision

Page 8 of 11

effects! In this case, you can use a lesser channel mode and fit more lights per

DMX universe.

View the DMX mode charts below to find the mode that best suits your needs.

DMX Channel Mode Sheet:

On the left side of the sheet you will see the different modes and which channel

corresponds to each function listed on the right in the given mode.

6CH

(d001)

10 CH

(a001)

Function Channel Value Description

1 Master Dimmer 0-255 Intensity Control

1 2 Red 0-255 Red Control

2 3 Green 0-255 Green Control

3 4 Blue 0-255 Blue Control

4 5 White 0-255 White Control

5 6 Amber 0-255 Amber Control

6 7 UV 0-255 UV Control

8 Strobe 0-255 Strobe: Slow to Fast

9 Macros 0-50 DMX Mode

51-100 Color Choose

101-150 Color Change

151-200 Color Fade

201-250 Color Pulse

251-255 Sound-Active Mode

10 Macro Speed 0-255 Slow to Fast

Setting the DMX Address:

Choose d001 in the menu for 6-channel mode, choose a001 for 10-channel mode.

Press enter to select and then use the Up and Down keys to set the number for

the DMX address. Press Enter to confirm and save your mode and address.

Starburst 7x18w Par – GAMMA LED Vision

Page 9 of 11

3. Maintenance

Troubleshooting Problems

The following are a few common problems that may occur during operation. Here

are some suggestions for easy troubleshooting:

A. The unit does not work:

•Check that the unit is plugged in to a working power connector.

•Press the menu button to confirm that the unit is powered on. If the screen

does not light up, the unit has no power.

B. Not Responding to the DMX Controller

•Check DMX cables to verify that they are plugged in and functional.

•Check the DMX address and mode – does it match the address and mode

patched in the lighting console or software?

•Plug the light directly into the DMX controller with a cable that you know is

good. Unplug all other lights – does it work?

•Try to use another DMX controller.

Starburst 7x18w Par – GAMMA LED Vision

Page 10 of 11

Inhaltsverzeichnis

Andere Gamma+ Beleuchtungsausrüstung Handbücher

Gamma+

Gamma+ Ditto 8 IP Bedienungsanleitung

Gamma+

Gamma+ Rayon Bedienungsanleitung

Gamma+

Gamma+ Silhouette Oculus XL Z Bedienungsanleitung

Gamma+

Gamma+ Luxe Cove 200 VW Bedienungsanleitung

Gamma+

Gamma+ SPKLEKO600 Bedienungsanleitung

Gamma+

Gamma+ Starburst Bedienungsanleitung

Gamma+

Gamma+ Borealis XL Z Bedienungsanleitung

Gamma+

Gamma+ TX6 LED 300 Beam Bedienungsanleitung

Gamma+

Gamma+ Cove LED 200 Bedienungsanleitung

Gamma+

Gamma+ Penn XL Bedienungsanleitung

Gamma+

Gamma+ Oculus 40 Bedienungsanleitung

Gamma+

Gamma+ Rose LED Zoom Bedienungsanleitung

Gamma+

Gamma+ TX5 Spot Bedienungsanleitung

Gamma+

Gamma+ Borealis R Bedienungsanleitung

Gamma+

Gamma+ Leko Toro Bedienungsanleitung

Gamma+

Gamma+ Helix 7 Bedienungsanleitung

Gamma+

Gamma+ Luxe Toro 600 RGBW Bedienungsanleitung

Gamma+

Gamma+ Luxe Cannon 600 Z IP Bedienungsanleitung

Gamma+

Gamma+ Xenon Par Bedienungsanleitung

Gamma+

Gamma+ I-Pix Bedienungsanleitung

Gamma+

Gamma+ Rose XT LED 200 Zoom Montageanleitung

Gamma+

Gamma+ Torrent Spot IP Bedienungsanleitung

Gamma+

Gamma+ Luxe Bianco 600 Bedienungsanleitung

Gamma+

Gamma+ Luxe Rose XT 200Z VW Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung