Gamma+ TX5 Spot Bedienungsanleitung
TX5 Spot
250w Spot Moving Head with Zoom
User Manual
TX5 Spot – GAMMA ED Vision
Page 1 of 21
Table of Contents
1. Introduction and Setup.......................................................................................................................................3
2. Setup and Operation.........................................................................................................................................11
DMX Basics.......................................................................................................................................................12
DMX Wiring......................................................................................................................................................12
3. Maintenance..........................................................................................................................................................18
Routine Maintenance...................................................................................................................................18
Troubleshooting Problems........................................................................................................................19
4. Technical Specifications....................................................................................................................................20
TX5 Spot – GAMMA ED Vision
Page 2 of 21
1. Introduction and Setup
Unpacking and In the Box
Thank you for choosing our TX5 Spot moving head light. For your own safety, please read
this manual before installing or using the device. This manual covers the important
information on installation and applications. Please install and operate the fixture with
following instructions. Meanwhile, please keep this manual for future needs.
The TX5 is made of a new type of high temperature strength plastic and cast aluminum
casing. The fixture is designed and manufactured strictly following CE standards,
complying with international standard DMX512 protocol. It’s independently controllable
and link-able with other lights for operation. And it is applicable for large-scale live
performances, theater, studio, nightclubs, houses of worship, and more.
The TX5 features high brightness and stability. Please carefully unpack it when you receive
the fixture and check for any damages from shipping. And please check whether the
following items are included inside the box:
•
•TX-5 250w Moving Head – 1
•DMX Signal Cable – 1
•Power Cable – 1
•Omega Clamps – 2
•User Manual - 1
TX5 Spot – GAMMA ED Vision
Page 3 of 21
Mounting and peration
Caution: For added protection mount the fixtures in areas outside walking paths, seating
areas, or in areas were the fixture might be reached by unauthorized personnel.
Before mounting the fixture to any surface, make sure that the installation area can hold a
minimum point load of 10 items the device’s weight.
Fixture installation must always be secured with a secondary safety attachment, such as an
appropriate safety cable.
Never stand directly below the device when mounting, removing, or servicing the fixture.
From a ceiling, or set on a flat level surface (see illustration below). Be sure this fixture is
kept at least 0.5m (1.5ft) away from any flammable materials (decoration etc.).
Always use and install the supplied safety cable as a safety measure to prevent accidental
damage and/or injury in the event the clamp fails.
Mounting points: Overhead mounting requires extensive experience, including amongst
others calculating working load limits, a fine knowledge of the installation material being
used, and periodic safety inspection of all installation material and the fixture. If you lack
these qualifications, do not attempt the installation yourself. Improper installation can
result in bodily injury.
Be sure to complete all rigging and installation procedures before connecting the main
power cord to the appropriate wall outlet.
Clamp Mounting: The TX5 provides a unique mounting bracket assembly that integrates
the bottom of the base, and the safety cable rigging point in one unit (see the illustration
below).
When mounting this fixture to truss be sure to secure an appropriately rated clamp to
each of the included omega brackets using a M10 screw fitted through the center hole of
the “omega bracket”. As an added safety measure be sure to attached at least one
properly rated safety cable to the fixture using on of the safety cable rigging point
integrated in the base assembly.
TX5 Spot – GAMMA ED Vision
Page 4 of 21
Regardless of the rigging option you choose for your TX5 Spot, always be sure to secure
your fixture with a safety cable. The fixture providers a built-in rigging point for a safety
cable on the hanging bracket as illustrated above. Be sure to only use the designated
rigging point for the safety cable and never secure a safety cable to a carrying handle.
∙The moving head is for spot effect for on-site decoration purpose.
So make sure to operate the fixture until it is in normal temperature.
∙This light should be keep away from strong shaking during any transportation or
movement.
∙Don’t pull up the light by only the head, or it might cause damages to the mechanical
parts.
∙Don’t expose the fixture in overheating, moisture or environments with too much dust
when installing it.
∙Make sure the installation environment is in good safety condition before installing the
fixture.
∙Make sure to put the safety chain and check whether the screws/clamps are screwed
properly when installing the fixture.
∙Make sure the lens are in good condition. It’s recommended to replace the units if there
are any damages or severe scratches.
∙Make sure the fixture is operated by qualified personnel who know the fixture before
using.
TX5 Spot – GAMMA ED Vision
Page 5 of 21
∙Keep the original packaging in case there is any future need for any warranty repair or
service.
∙Don’t try to modify the fixtures without any instruction by the manufacturer or the
appointed repairing agencies.
∙Warranty is voided if there are any malfunctions from not following the user manual
while operating or any hazardous operation, like shock short circuit, electronic shock, lamp
broken, etc.
Features
250W High Output White ED
50,000 hour lifespan and lower power consumption
5.5°-30° Beam Angle with focus function
High light output: 13300 UX@5M in White light, Zoomed In
Overtemp protection: When the internal temperature hits 40°C and then the fans
begin to work, if the internal temperature hits 70°C, the brightness reduces to half
until it cools.
Color Wheel: 7 colors +white, rotation with variable direction and speed
1 static Gobo Wheel: 8 gobos +white, wheel rotation and shake
1 Rotating Gobo Wheel: 6 gobos +white, wheel rotation and shake
Prism: 3-facet Prism, bi-directionally rotatable at variable speeds
High speed strobe effect with 1-25 hz
Internal program available
16/18 DMX Channels USITT DMX-512
DMX 512, master-slave and sound activated controllable or auto operation
Colorful CD display
Efficient low noise fan cooling system
PowerCon IN/OUT
3-pin X R connectors IN/OUT
Two 1/4 turn fastening Omega Clamps
IP 20 protection rating
TX5 Spot – GAMMA ED Vision
Page 6 of 21
Gobos Included with the TX5
The TX5 features 2 gobo wheels – 1 fixed and 1 rotating. The rotating gobo wheel also
features interchangeable gobos.
Fixed Gobo Wheel (Gobo Wheel 1)
Rotating Gobo Wheel (Gobo Wheel 2)
TX5 Spot – GAMMA ED Vision
Page 7 of 21
Safety Precautions
This device has left the factory in perfect condition. In order to maintain this condition
and to ensure a safe operation, it is absolutely necessary for the user to follow the safety
instructions and warning notes written in this user manual.
If the device has been exposed to temperature changes due to environmental changes,
do not switch it on immediately. The arising condensation could damage the device.
This light should be keep away from strong shaking during any transportation or
movement.
Don’t pull up the light by only the head, or it might cause damages to the mechanical
parts.
eave the device switched off until it has reached room temperature.
This device falls under protection-class I. Therefore it is essential that the device be
earthed. The electric connection must carry out by qualified person.
The device shall only be used with rate voltage and frequency.
Make sure that the available voltage is not higher than stated at the end of this manual.
Make sure the power cord is never crimped or damaged by sharp edges. If this would be
the case, replacement of the cable must be done by an authorized dealer.
Always disconnect from the mains, when the device is not in use or before cleaning it.
Only handle the power cord by the plug. Never pull out the plug by tugging the power
cord.
During initial start-up some smoke or smell or smell may arise. This is a normal process
and does not necessary mean that the device is defective, it should decrease gradually.
Please don’t project the beam onto combustible substances.
Fixtures cannot be installed on combustible substances, keep more than 50cm distance
with wall for smooth air flow, so there should be no shelter for fans and ventilation for
heat radiation.
If the external flexible cable or cord of this fixture is damaged, it shall be exclusively
replaced by the manufacturer of his service agent or a similar qualified person in order to
avoid a hazard.
TX5 Spot – GAMMA ED Vision
Page 8 of 21
Don’t expose the fixture in overheating, moisture or environments with too much dust
when installing it. And don’t lay any power cables on the floor. Or it might cause
electronics shock to the people.
TX5 Spot – GAMMA ED Vision
Page 9 of 21
Customer Support
WARRANTY PO ICY
GAMMA ED Vision warrants its products for the periods set below from the date of
purchase to be free of manufacturer and workmanship defects. Warranty does not cover
normal wear and tear caused by force, negligence or misuse of products. GAMMA ED
Vision is not responsible for any damages or injury caused by misuse or improper
handling of the products and in accordance with instructions and specifications of manual.
Warranty terms are as follows:
ED Fixtures:
Indoor: 2 Years
Outdoor (IP 54 or higher): 1 Year
amp Fixtures: 1 year / excludes the lamp
ED Video Products:
Indoor: 2 Years
Outdoor (IP 54 or higher): 1 Year
Controllers: 2 years
Batteries: 6 months
All Trussing Related Products and Accessories: 1 Year
Please visit WWW.GAMMA EDVISON.COM for complete imited Warranty terms and
contact information.
TX5 Spot – GAMMA ED Vision
Page 10 of 21
Inhaltsverzeichnis
Andere Gamma+ Beleuchtungsausrüstung Handbücher
Gamma+
Gamma+ Rose LED Zoom Bedienungsanleitung
Gamma+
Gamma+ Luxe Cannon 600 Z IP Bedienungsanleitung
Gamma+
Gamma+ Ditto 8 IP Bedienungsanleitung
Gamma+
Gamma+ Starburst Bedienungsanleitung
Gamma+
Gamma+ SPKLEKO600 Bedienungsanleitung
Gamma+
Gamma+ TX6 LED 300 Beam Bedienungsanleitung
Gamma+
Gamma+ Helix 7 Bedienungsanleitung
Gamma+
Gamma+ Torrent Wash IP Bedienungsanleitung
Gamma+
Gamma+ Rose XT LED 200 Zoom Montageanleitung
Gamma+
Gamma+ Luxe Cove 200 VW Bedienungsanleitung
Gamma+
Gamma+ Penn XL Bedienungsanleitung
Gamma+
Gamma+ Silhouette Oculus XL Z Bedienungsanleitung
Gamma+
Gamma+ Borealis XL Z Bedienungsanleitung
Gamma+
Gamma+ Borealis R Bedienungsanleitung
Gamma+
Gamma+ Luxe Bianco 600 Bedienungsanleitung
Gamma+
Gamma+ Xenon Par Bedienungsanleitung
Gamma+
Gamma+ Luxe Rose XT 200Z VW Bedienungsanleitung
Gamma+
Gamma+ Luxe Toro 600 RGBW Bedienungsanleitung
Gamma+
Gamma+ Rayon Bedienungsanleitung
Gamma+
Gamma+ I-Pix Bedienungsanleitung
Beliebte Beleuchtungsausrüstung Handbücher anderer Marken
Qazqa
Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung
Commercial Electric
Commercial Electric 54568141 Bedienungsanleitung
CREE LIGHTING
CREE LIGHTING 304 Series Bedienungsanleitung
Goobay
Goobay 49867 Bedienungsanleitung
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Bedienungsanleitung
Alkalite
Alkalite Krypton KT-81 Bedienungsanleitung
