Gamma+ Starburst Bedienungsanleitung

Starburst 18x10– GAMMA LED Vision

Page 1 of 16

Starburst 18x10

18x10w RGBWA+UV LED PAR

Starburst 18x10– GAMMA LED Vision

Page 2 of 16

Table of Contents

1. Introduction and Setup ..................................................................................................................................... 3

Unpacking and In the Box ............................................................................................................................... 3

Features .................................................................................................................................................................... 3

Safety Precautions ............................................................................................................................................... 3

Customer Support……………………………………………………………………………………………………………….5

Setup & Operation…………………………………………………………………………………………………………………..6

Using the LCD Screen………………………………………………………………………………………………………….6

Menu Operation…………………………………………………………………………………………………………………..7

DMX Setup……………………………………………………………………………………………………………………….8-9

DMX Basics………………………………………………………………………………………………………………………8

DMX Wiring……………………………………………………………………………………………………………………..9

DMX Modes………………………………………………………………………………………………………………….10-13

Maintenance…………………………………………………………………………………………………………………………..14

Technical Specifiactions………………………………………………………………………………………………………….15

Photometrics…………………………………………………………………………………………………………………………..16

Starburst 18x10– GAMMA LED Vision

Page 3 of 16

1.#Introduction*and*Setup*Unpacking)

After&receiving&the&device,&please&check&whether&any&visible&damage&was&caused&during&transport.&

If&the&power&cord,&housing&or&the&light&are&damaged,&do&not&operate&the&device.&Contact&your&

dealer&or&GAMMA&LED&Vision&immediately.&

Thank&you&for&choosing&our&Starburst&Par.&This&light&is&designed&by&high&strength&die-&casting&

aluminum&which&is&able&to&endure&high&temperatures,&and&is&designed&in&a&stylish&form.&

It&uses&high&power&Red,&Green,&Blue,&White,&Amber,&and&UV&LED’s&for,&low&power&consumption,&

high&brightness,&and&excellent&colors.&The&Starburst&par&features&DMX512&control,&standalone,&

and&sound-active&modes.&

For&your&own&safety,&please&read&this&manual&before&installing&or&using&the&device.&This&manual&

covers&the&important&information&on&installation&and&applications.&Please&install&and&operate&the&

fixture&with&following&instructions.&Meanwhile,&please&keep&this&manual&for&future&needs.&

In#the#Box:#

Starburst&Par&LED&-&Power&Cable&-&User&Manual&-&

1&pc&1&pc&1&pc&

Mounting)and)Operation)

Use&a&clamp&rated&for&the&full&weight&of&the&Starburst&Par&to&hang&the&fixture&from&the&mount(s)&on&

the&fixture’s&yoke.&

As&an&added&safety&measure&be&sure&to&attached&at&least&one&properly&rated&safety&cable&to&the&

fixture&using&on&of&the&safety&cable&rigging&point&integrated&in&the&base&assembly&or&on&the&yoke.&

Safety)Precautions)

Caution:&For&added&protection&mount&the&fixtures&in&areas&outside&walking&paths,&seating&areas,&or&

in&areas&were&the&fixture&might&be&reached&by&unauthorized&personnel.&

Caution: For added protection mount the fixtures in areas outside walking paths, seating

areas, or in areas were the fixture might be reached by unauthorized personnel.

Before mounting the fixture to any surface, make sure that the installation area can hold a

minimum point load of 10 items the device’s weight.

Fixture installation must always be secured with a secondary safety attachment, such as an

appropriate safety cable.

Never stand directly below the device when mounting, removing, or servicing the fixture.

Starburst 18x10– GAMMA LED Vision

Page 4 of 16

From a ceiling, or set on a flat level surface (see illustration below). Be sure this fixture is kept

at least 0.5m (1.5ft) away from any flammable materials (decoration etc.).

Always use and install the supplied safety cable as a safety measure to prevent accidental

damage and/or injury in the event the clamp fails.

DO NOT connect the device to any dimmer pack.

During initial start-up some smoke or smell may arise. This is a normal process and does not

necessarily mean that the device is defective, and it will decrease gradually within 15 minutes.

Don’t try to modify the fixture without any instruction by the manufacturer.

Warranty is voided if there are any malfunctions from not following the user manual while

operating or any hazardous operation, like shock short circuit, electronic shock, lamp broken,

etc.

Starburst 18x10– GAMMA LED Vision

Page 5 of 16

Customer)Support)

WARRANTY&POLICY&

GAMMA&LED&Vision&warrants&its&products&for&the&periods&set&below&from&the&date&of&purchase&to&

be&free&of&manufacturer&and&workmanship&defects.&Warranty&does&not&cover&normal&wear&and&

tear&caused&by&force,&negligence&or&misuse&of&products.&GAMMA&LED&Vision&is&not&responsible&for&

any&damages&or&injury&caused&by&misuse&or&improper&handling&of&the&products&and&in&accordance&

with&instructions&and&specifications&of&manual.&

Warranty&terms&are&as&follows:&

LED&Fixtures:&

Indoor:&2&Years&

Outdoor&(IP&54&or&higher):&1&Year&

Lamp&Fixtures:&1&year&/&excludes&the&lamp&LED&Video&Products:&

Indoor:&2&Years&

Outdoor&(IP&54&or&higher):&1&Year&

Controllers:&2&years&

Batteries:&6&months&

All&Trussing&Related&Products&and&Accessories:&1&Year&

Please&visit&WWW.GAMMALEDVISON.COM&for&complete&Limited&Warranty&terms&and&contact&

information.&

Starburst 18x10– GAMMA LED Vision

Page 6 of 16

2. Setup and Operation

Using the LCD Menu and Buttons

Turn on the light, press the MENU button to enter the menu mode, use the UP and DOWN

buttons to find the menu,

When the preset menu is displayed on the display screen, press the ENTER button to

confirm, use the UP and DOWN buttons to select the sub menu, press the ENTER button to

save the settings or automatically return to the previous menu.

Press the MENU button to return, or wait for one minute and then exit the menu mode

automatically. When there is no power connection, press the UP button for 1 minute to enter

the menu mode. After setting, press MENU button or wait for 1 minute to exit the power-off

setting function automatically.

There are also various status LED’s on the Starburst to show if DMX is active, if the unit is in

Master, Slave, or Sound-Active mode.

1. DMX means the light is in “DMX mode”. Similarly, SLAVE means the light is in the

“Slave mode”.

2. The color of the point shows the condition of signal transmission. Green represents

good condition, while red represents the signal is interrupted.

3. The display shows the working temperature of the light. When temperature are

exceeded, the letters will turn yellow.

Starburst 18x10– GAMMA LED Vision

Page 7 of 16

Menu Operation

AMENU

DMX Address

Address

1-512

Channel

Mode

CH Mode

3CH

6CH

8CH

12CH

DMX Mode

DMX Hold

Blackout

Manual Mode

Manual

R (0-255)

G (0-255)

B (0-255)

W (0-255)

A (0-255)

UV (0-255)

Color: 1-70

Strobe: 0-20

Auto Mode

Speed: 01-31

Auto: 01-15

Slave Mode

Slave

Custom Mode

01-11

Info

Working Time

Software Version

Hardware Version

Starburst 18x10– GAMMA LED Vision

Page 8 of 16

DMX Setup

DMX Basics

DMX512 stands for digital multiplex 512. This means that 512 channels are controlled

digitally through 1 data cable.

A channel is a set of 255 steps that are assigned to control attributes in each light. This

may be a color like red, green or blue, and intensity, strobe, pan/tilt or other attributes.

Multiple sets of 512 “universes” may be used. Only 1 universe will travel on a DMX cable,

but through networked DMX (Art-Net or sACN E1.31), many universes can travel over a

network.

DMX Wiring

DMX works by connecting 1 or multiple lights to the output of a DMX lighting console or

software with a DMX interface.

DMX lights connect in what is called a “daisy-chain”. Your first DMX cable will plug it’s

male DMX connector into the female DMX connector on your lighting console. The

remaining female connector will then connect to the DMX input on your first light.

You may then connect your next fixture to the output of your first light, and continue the

chain

Starburst 18x10– GAMMA LED Vision

Page 9 of 16

32 Fixture Rule – DMX only allows you to connect up to 32 fixtures in a single daisy

chain for signal strength. Sometimes, depending on the fixtures and cable length, this

number is less (or more).

DMX Cables can be 3-pin or 5-pin. These use the same type of data, and in the 5-pin

only pins 1, 2, and 3 are used. The cable should be a 2 conductor, shielded cable of at

least 110 ohms resistance. Microphone cable is not DMX cable.

Please refer to the diagram below:

For installations where the DMX cable has to run a long distance or is in an electrically

noisy environment, it is recommended to use a DMX terminator. This helps in preventing

corruption of the digital control signal by electrical noise and reflections. The DMX

terminator is simply an XLR plug with a 120 Ω resistor connected between pins 2 and 3,

which is then plugged into the output XLR socket of the last fixture in the chain. Please

see illustrations below:

Starburst 18x10– GAMMA LED Vision

Page 10 of 16

DMX Channel Mode Sheet:

On the left side of the sheet you will see the different modes and which channel

corresponds to each function listed on the right in the given mode.

3 Channel

Value

Function

0-255

Hue

0-255

Saturation

0-255

Value (Brightness)

6 Channel

Value

Function

0-255

Red Dimmer

0-255

Green Dimmer

0-255

Blue Dimmer

0-255

White Dimmer

0-255

Amber Dimmer

0-255

UV Dimmer

8 Channel

Value

Function

0-255

Master Dimmer

0-255

Strobe Speed

0-255

Red Dimmer

0-255

Green Dimmer

0-255

Blue Dimmer

0-255

White Dimmer

0-255

Amber Dimmer

0-255

UV Dimmer

Inhaltsverzeichnis

Andere Gamma+ Beleuchtungsausrüstung Handbücher

Gamma+

Gamma+ Rose LED Zoom Bedienungsanleitung

Gamma+

Gamma+ I-Pix Bedienungsanleitung

Gamma+

Gamma+ Torrent Wash IP Bedienungsanleitung

Gamma+

Gamma+ Ditto 8 IP Bedienungsanleitung

Gamma+

Gamma+ Luxe Toro 600 RGBW Bedienungsanleitung

Gamma+

Gamma+ Oculus 40 Bedienungsanleitung

Gamma+

Gamma+ Rayon Bedienungsanleitung

Gamma+

Gamma+ Starburst 7x18w Bedienungsanleitung

Gamma+

Gamma+ Luxe Bianco 600 Bedienungsanleitung

Gamma+

Gamma+ Borealis XL Z Bedienungsanleitung

Gamma+

Gamma+ Penn XL Bedienungsanleitung

Gamma+

Gamma+ Rose XT LED 200 Zoom Montageanleitung

Gamma+

Gamma+ Leko Toro Bedienungsanleitung

Gamma+

Gamma+ Luxe Cannon 600 Z IP Bedienungsanleitung

Gamma+

Gamma+ SPKLEKO600 Bedienungsanleitung

Gamma+

Gamma+ Helix 7 Bedienungsanleitung

Gamma+

Gamma+ Luxe Rose XT 200Z VW Bedienungsanleitung

Gamma+

Gamma+ Cove LED 200 Bedienungsanleitung

Gamma+

Gamma+ Luxe Cove 200 VW Bedienungsanleitung

Gamma+

Gamma+ TX5 Spot Bedienungsanleitung

Gamma+

Gamma+ TX6 LED 300 Beam Bedienungsanleitung

Gamma+

Gamma+ Torrent Spot IP Bedienungsanleitung

Gamma+

Gamma+ LED Leko 200 Bedienungsanleitung

Gamma+

Gamma+ Xenon Par Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung