Gamma+ LED Leko 200 Bedienungsanleitung

LED Leko 200

Cool White and Warm White 200w LED Spot

User Manual

LED Leko 200 CW/WW – GAMMA LED Vision

Page 1 of 12

Table of Contents

1. Introduction and Setup....................................................................................................................................3

Unpacking and In the Box..............................................................................................................................3

Mounting and Operation................................................................................................................................3

Features...................................................................................................................................................................3

Safety Precautions..............................................................................................................................................3

Customer Support..............................................................................................................................................5

2. Setup and Operation.........................................................................................................................................6

Using the LCD Menu and Buttons..............................................................................................................6

DMX Setup............................................................................................................................................................7

DMX Basics.......................................................................................................................................................7

DMX Wiring.....................................................................................................................................................7

DMX Modes and Configuration..............................................................................................................8

3. Maintenance.......................................................................................................................................................10

Routine Maintenance......................................................................................................................................10

Troubleshooting Problems...........................................................................................................................10

4. Technical Specifications.................................................................................................................................11

Photometric Reports.......................................................................................................................................12

LED Leko 200 CW/WW – GAMMA LED Vision

Page 2 of 12

1. Introduction and Setup

Unpacking and In the Box

Thank you for choosing our LED Leko 200 CW/WW. For your own safety, please read this

manual before installing or using the device. This manual covers the important information on

installation and applications. Please install and operate the fixture with following instructions.

Meanwhile, please keep this manual for future needs.

In the box you will receive:

•LED Leko 200 CW/WW: 1

•DMX Cable: 1

•Power Cable 1

•User Manual 1

Mounting and Operation

Use a clamp rated for the full weight of the LED Leko 200 to hang the fixture from the

mount(s) on the fixture’s yoke.

As an added safety measure be sure to attached at least one properly rated safety cable

to the fixture using on of the safety cable rigging point integrated in the base assembly or

on the yoke.

Features

•200w Cool White and Warm White Leko

•Multiple Lens Options Available - 19°/26°/36°/50°

Safety Precautions

Caution: For added protection mount the fixtures in areas outside walking paths, seating

areas, or in areas were the fixture might be reached by unauthorized personnel.

Before mounting the fixture to any surface, make sure that the installation area can hold a

minimum point load of 10 items the device’s weight.

Fixture installation must always be secured with a secondary safety attachment, such as an

appropriate safety cable.

Do not clamp the safety cable to the U bracket or clamp. That is not a secondary safety

point.

LED Leko 200 CW/WW – GAMMA LED Vision

Page 3 of 12

Safety Clamp Safety Cable

A secondary safety point is any point that will adequately hold the led profile spotlight if

the clamp fails.

Then the safety cable would be the backup and stop the fixture from falling to the

ground. So do NOT fix the safety cable to the same place that the "C"clamp is attached

Never stand directly below the device when mounting, removing, or servicing the fixture.

From a ceiling, or set on a flat level surface (see illustration below). Be sure this fixture is

kept at least 0.5m (1.5ft) away from any flammable materials (decoration etc.).

Always use and install the supplied safety cable as a safety measure to prevent accidental

damage and/or injury in the event the clamp fails.

∙Don’t try to modify the fixture without any instruction by the manufacturer or the

appointed repairing agencies.

∙Warranty is voided if there are any malfunctions from not following the user manual

while operating or any hazardous operation, like shock short circuit, electronic shock, lamp

broken, etc.

LED Leko 200 CW/WW – GAMMA LED Vision

Page 4 of 12

Customer Support

WARRANTY POLICY

GAMMA LED Vision warrants its products for the periods set below from the date of

purchase to be free of manufacturer and workmanship defects. Warranty does not cover

normal wear and tear caused by force, negligence or misuse of products. GAMMA LED

Vision is not responsible for any damages or injury caused by misuse or improper

handling of the products and in accordance with instructions and specifications of manual.

Warranty terms are as follows:

LED Fixtures:

Indoor: 2 Years

Outdoor (IP 54 or higher): 1 Year

Lamp Fixtures: 1 year / excludes the lamp

LED Video Products:

Indoor: 2 Years

Outdoor (IP 54 or higher): 1 Year

Controllers: 2 years

Batteries: 6 months

All Trussing Related Products and Accessories: 1 Year

Please visit WWW.GAMMALEDVISON.COM for complete Limited Warranty terms and

contact information.

LED Leko 200 CW/WW – GAMMA LED Vision

Page 5 of 12

2. Setup and Operation

Using the LCD Menu and Buttons

Menu Sub Menu Display Key Operation

Standard channel mode

(5 channel)

DMX(5CH)

Addr:001

Press UP/DOWN to change the DMX address for

the channel mode selected.

Basic channel mode

(2 channel) DMX(2CH)

Addr:001

Press UP/DOWN to change the DMX address for

the channel mode selected.

Stac mode Dimmer

(warm white) Stac >

Warm:000 Press “UP/DOWN” to change brightness of Warm

White LED.

Press “ENTER” change to sub menu

Dimmer

(cool white)

Stac >

Cool:000

Press “UP/DOWN” to change

brightness of cool white LED.

Press “ENTER” change to sub menu

Strobe Stac >

Strob:00 Press UP/DOWN to change the speed of strobe

Press “ENTER” change to sub menu

Temperature

control The current

temperature Temp >

Curr: 0 Press “ENTER” change to sub menu

Seng

protecon

temperature

Temp >

Top :080 Press UP/DOWN to change the

temperature Press “ENTER” change to sub

Revert to default sengs Reset Press “ENTER” , and press password as below

Reset

Pwd:

Press UP/DOWN to input password, each me

you press the password, it will show “*”

Reset

Pwd:****

Press “ENTER” to conﬁrm password. It will

revert to default seng once the password is

correct, otherwise it will delete all the “*”

LED Leko 200 CW/WW – GAMMA LED Vision

Page 6 of 12

DMX Setup

DMX Basics

DMX512 stands for digital multiplex 512. This means that 512 channels are controlled

digitally through 1 data cable.

A channel is a set of 255 steps that are assigned to control attributes in each light. This

may be a color like red, green or blue, and intensity, strobe, pan/tilt or other attributes.

Multiple sets of 512 “universes” may be used. Only 1 universe will travel on a DMX cable,

but through networked DMX (Art-Net or sACN E1.31), many universes can travel over a

network.

DMX Wiring

DMX works by connecting 1 or multiple lights to the output of a DMX lighting console or

software with a DMX interface.

DMX lights connect in what is called a “daisy-chain”. Your first DMX cable will plug it’s

male DMX connector into the female DMX connector on your lighting console. The

remaining female connector will then connect to the DMX input on your first light.

You may then connect your next fixture to the output of your first light, and continue the

chain.

32 Fixture Rule – DMX only allows you to connect up to 32 fixtures in a single daisy

chain for signal strength. Sometimes, depending on the fixtures and cable length, this

number is less (or more).

DMX Cables can be 3-pin or 5-pin. These use the same type of data, and in the 5-pin

only pins 1, 2, and 3 are used. The cable should be a 2 conductor, shielded cable of at

least 110 ohms resistance. Microphone cable is not DMX cable.

LED Leko 200 CW/WW – GAMMA LED Vision

Page 7 of 12

Please refer to the diagram below:

For installations where the DMX cable has to run a long distance or is in an electrically

noisy environment, it is recommended to use a DMX terminator. This helps in preventing

corruption of the digital control signal by electrical noise and reflections. The DMX

terminator is simply an XLR plug with a 120 Ω resistor connected between pins 2 and 3,

which is then plugged into the output XLR socket of the last fixture in the chain. Please

see illustrations below:

DMX Modes and Configuration

The LED Leko 200 has multiple DMX modes, sometimes called “personalities”, “profiles”, or

as we will use here “modes”.

In general, modes with more DMX channels offer a greater level of control or options but

take up more of your output channels on your lighting console or software.

Modes with less DMX channels often offer less control, but may be plenty for your needs.

Depending on your needs and control solution, you may not need channels for

automated programs, strobes, or macros – your console may have great effects! In this

case, you can use a lesser channel mode and fit more lights per DMX universe.

View the DMX mode charts below to find the mode that best suits your needs.

LED Leko 200 CW/WW – GAMMA LED Vision

Page 8 of 12

DMX Channel Mode Sheet:

On the left side of the sheet you will see the different modes and which channel

corresponds to each function listed on the right in the given mode.

2CH

Basic

5CH

Standard

Function Channel Value Description

1 Dimmer 0-255 Master Dimmer

1 2 Cool White 0-255

2 3 Warm White 0-255

4 Dimmer Curve? 0-10 Default Delay of Dimmer

(Softening)

11-15 No Fade Softening

16-255 Shortest to Longest Fade

Softening

5 Strobe 0-10 No Strobe

11-255 Strobe, Slow to Fast

LED Leko 200 CW/WW – GAMMA LED Vision

Page 9 of 12

3. Maintenance

Routine Maintenance

Fan Cleaning

Periodically do a visual inspection of the fans. If they are dirty, power off the unit and use

a small electronics vacuum to clean the fans out. Do not use a can of C02 or an Air

Compressor. These will simply blow the dust into the unit and may leave other residue.

Front Lens and Shutter Blade Cleaning

The front lens should be cleaned so that light output is maintained. The shutter blades

may also occasionally need cleaning.

With the light powered off, use a moist, lint-free cloth. Never use alcohol of solvents to

clean the fixture.

Never spray any cleaners on the fixture.

Troubleshooting Problems

The following are a few common problems that may occur during operation. Here are

some suggestions for easy troubleshooting:

A. The unit does not work:

•Check that the unit is plugged in to a working power connector.

•Press the menu button to confirm that the unit is powered on. If the screen does

not light up, the unit has no power.

B. Not Responding to the DMX Controller

•Check DMX cables to verify that they are plugged in and functional.

•Check the DMX address and mode – does it match the address and mode patched

in the lighting console or software?

•Plug the light directly into the DMX controller with a cable that you know is good.

Unplug all other lights – does it work?

•Try to use another DMX controller.

LED Leko 200 CW/WW – GAMMA LED Vision

Page 10 of 12

Inhaltsverzeichnis

Andere Gamma+ Beleuchtungsausrüstung Handbücher

Gamma+

Gamma+ Silhouette Oculus XL Z Bedienungsanleitung

Gamma+

Gamma+ Luxe Rose XT 200Z VW Bedienungsanleitung

Gamma+

Gamma+ Borealis R Bedienungsanleitung

Gamma+

Gamma+ Ditto 8 IP Bedienungsanleitung

Gamma+

Gamma+ Penn XL Bedienungsanleitung

Gamma+

Gamma+ TX5 Spot Bedienungsanleitung

Gamma+

Gamma+ TX6 LED 300 Beam Bedienungsanleitung

Gamma+

Gamma+ Penn Mini Bedienungsanleitung

Gamma+

Gamma+ I-Pix Bedienungsanleitung

Gamma+

Gamma+ Rose LED Zoom Bedienungsanleitung

Gamma+

Gamma+ Luxe Cove 200 VW Bedienungsanleitung

Gamma+

Gamma+ Xenon Par Bedienungsanleitung

Gamma+

Gamma+ SPKLEKO600 Bedienungsanleitung

Gamma+

Gamma+ Oculus 40 Bedienungsanleitung

Gamma+

Gamma+ Luxe Toro 600 RGBW Bedienungsanleitung

Gamma+

Gamma+ Starburst 7x18w Bedienungsanleitung

Gamma+

Gamma+ Rose XT LED 200 Zoom Montageanleitung

Gamma+

Gamma+ Luxe Cannon 600 Z IP Bedienungsanleitung

Gamma+

Gamma+ Torrent Wash IP Bedienungsanleitung

Gamma+

Gamma+ Luxe Bianco 600 Bedienungsanleitung

Gamma+

Gamma+ Borealis XL Z Bedienungsanleitung

Gamma+

Gamma+ Leko Toro Bedienungsanleitung

Gamma+

Gamma+ Helix 7 Bedienungsanleitung

Gamma+

Gamma+ Starburst Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung