Ganz Digimaster DR-4FX1 Bedienungsanleitung

２

CONTENT

OVERVIEW

3 Before Installation

4 Key Features

5 What’s included?

6Front Panel

7 Rear Panel

8 Remote ControlAt a Glance

INSTALLATION

10 HDD Installation

12 Basic Layout

13 Connecting to an external devices

３

OVERVIEW

Before installation

Comply with the following instructions to prevent a fire, explosion, system failure or electric shock.

Remove the power supply module before proceeding.

Check the input voltage (AC100V–AC240V) to the power supply module before connecting it.

Keep the product away from humidity.

Ensure that all devices connected to the product should be properly earth-grounded.

In operation mode

Comply with the following instructions to prevent a fire, explosion, system failure or electric shock.

If you need to open the cover, consult with a service person who could help you do what you

want to do.

Do not connect multiple devices to a single power socket.

Keep the product away from dust or too much combustible substances (ex: propane gas).

Do not touch it with wet hand.

Do not insert a conductor in the vent of the ventilation system.

Do not apply excessive force to unplug the power cord.

Disassembly & Cleaning

When cleaning on the surface, use a dry cloth.

Do not wipe the product using water, paint thinner or organic solvents.

Do never dismantle, repair or modify the product by your own.

During installation

To prevent an accident or physical injury and to operate DVR properly, please comply with the

followings

Secure at least 18 centimeter of distance between cooling fan and wall for a proper ventilation.

Install the product on a flat surface.

Keep it away from direct sunlight or excessive temperature.

While in use

Do not apply force to or shake it while using it.

Do not move, throw away or put excessive force to it.

Using any unrecommended HDD may cause a system failure. Check the compatibility list and

use only compatible HDDs.

{A system failure or data loss caused by an incompatible HDD will void your warranty.}

４

OVERVIEW

Key Features

This product is capable of receiving inputs from up to 16 channels of 960H camera inputs of video

and audio recording onto a hard disk drive in real-time, as well as providing monitoring, playback

and backup footage in excellent quality of 960H resolution.

It also provides transferring video and audio data to the networked external devices, which allows

remote monitoring environment for computers and mobile devices including cell phones.

Up to 16 channels of 960H camera videos can be displayed at 480(NTSC)/400(PAL) fps in

real-time.

Up to 16 channels of 960H camera videos can be saved at maximum 480 /400 fps.

Simultaneously recording and playback of maximum 16 channels.

Supports H.264 HP CODEC.

Auto alarm feature with self-diagnostics on the system (HDD S.M.A.R.T, network error, etc.)

Supports dual streaming for remote access service.

Various search methods (time, event, bookmark and thumbnail).

Mass storage backup via USB port.

Supports remote access and search using web server.

Dedicated smart phone applications that can be used with iPhone and iPad or on Android OS.

1080p Full HD GUI

５

OVERVIEW

What's included?

Mouse Remote Control x1 Power Cable x1

& Batteries (AAA x2)

DC 12V Adaptor Screws Adapter cable retainer clip x1

(For DR-8/16FX2)

User manual CD Quick Guide

６

OVERVIEW

Front Panel

DR-4FX1

Name

Description

IR Remote

Control

Receiver

Receive the signal from the remote control

USB

Used for connecting USB storage or mouse.

Status LED

Show the status of power, recording or network connection

together with the corresponding alarm.

DR-8/16FX2

Name

Description

IR Remote

Control

Receiver

Receive the signal from the remote control

USB

Used for connecting USB storage or mouse.

Status LED

Show the status of power, recording or network connection

together with the corresponding alarm.

７

OVERVIEW

Rear Panel

NO Name

Description

VIDEO IN

Video input terminal for cameras.

ETHERNET

Network port for connection to the Internet, router or hub

VGA

VGA monitor video output port.

AUDIO IN

1/2 : Audio input terminal that supports channel 1 and 2.

3/4 : Audio input terminal that supports channel 3 and 4.

ALARM IN

RELAY

RS-485

Alarm input signal port.

Relay Terminal output port.

Port for communication with external devices such as PTZ

camera and system keyboard.

DC 12V

Power input port. Connect to a DV12V adaptor.

DIP Switch

Switch to select a video type or an output type.

AUDIO OUT

Port for speaker connection.

HD MONITOR

HD monitor video output port.

4 channel

8 channel

16 channel

８

OVERVIEW

Remote Control At a Glance

LOGOUT

POWER

Turn on or off the power.

PANIC

Start the emergency recording.

Display the search window.

ALARM

Show the alarm status with

a popup window.

ARCHIVE

Display the backup window.

SETUP

Display the system setup menu.

Channel

Function as channel selection

button in live or playback mode.

Or used for entering the password.

Set the remote control ID.

DISPLAY

Switch the split mode.

SEQ

Switch to sequence mode.

SNAPSHOT

Turn on or off the power.

Used to change the direction

or adjust the play speed

in playback mode.

EXIT

Exit from the current screen

and return to the previous

screen.

ENTER

Select a menu item or apply

your settings.

LOG

Display the log list.

KEYLOCK

Lock any operation on the unit.

AUDIO

Display the audio channel

selection window.

RESERVE

Turn on or off the power.

Display the tool bar on the live

screen.

Use to move through the menus

PTZ/ZOOM

Enter the PTZ or digital zoom

Mode and control the operation.

９

OVERVIEW

Change the remote control ID

The remote control will be active only if the remote control ID matches with that specified on the

DVR.

If multiple DVRs are installed on one place and you have just a single remote control, use the ID

button to set the remote control ID. Only the ID-matching DVR can be controlled.

1. From <SYSTEM> - <CONTROL DEVICE> under the System Setup menu, set the

<REMOTE CONTROLLER ID> and press <Apply>.

Select between 00 and 99. For more details, refer to <SYSTEM SETUP>.

The remote control will be active only if the remote control ID matches with that of the

DVR's system ID.

2. Press the [ID] button on the remote control. The default remote control ID is 00.

3. Use the number buttons to provide a two-digit ID. If you want to enter 01, for instance,

enter the number 0 and 1 in sequence.

Check if the remote control ID is set properly by manipulating the remote control.

4. To reset the ID to 00, press and hold the [ID] button.

１０

INSTALLATION

HDD Installation

For 4 channel model

1. Remove the screw from the bracket on the

Bottom side of the DVR.

2. Hold the HDD bracket with your finger as

shown in the figure and pull it to separate

it from the DVR.

3. Install the HDD on the bracket and fix it by

fastening 4 screws on its sides.

When installing HDD, make sure to install

in the correct direction.

4. Insert back the bracket installed with the

HDD into the DVR.

5. Fix the bracket by fastening the screw.

Andere Handbücher für digimaster DR-4FX1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ganz DVR Handbücher

Ganz

Ganz DIGIMASTER SERIES Bedienungsanleitung

Ganz

Ganz DR8NRT Bedienungsanleitung

Ganz

Ganz digimaster DR-4FX1 Bedienungsanleitung

Ganz

Ganz DIGIMASTER DR4N Bedienungsanleitung

Ganz

Ganz DR-16F44-AT Bedienungsanleitung

Ganz

Ganz DIGIMASTER DR-16M55-RA-4TB Bedienungsanleitung

Ganz

Ganz Digimaster DR4N-Lite Bedienungsanleitung

Ganz

Ganz ZR-DHC1630NP Bedienungsanleitung

Ganz

Ganz ZR-DH1621NP Bedienungsanleitung

Ganz

Ganz DIGIMASTER DR8HV Bedienungsanleitung

Ganz

Ganz DigiMAster DR4H Bedienungsanleitung

Ganz

Ganz Digimaster DR4HL Bedienungsanleitung

Ganz

Ganz DIGIMASTER SERIES Bedienungsanleitung

Ganz

Ganz AI BOX 4CH Bedienungsanleitung

Ganz

Ganz DR8NRT Bedienungsanleitung

Ganz

Ganz ZR-DH921NP Bedienungsanleitung

Ganz

Ganz NR8-32M78 Bedienungsanleitung

Ganz

Ganz DIGIMASTER DR-16FX5-3TB Bedienungsanleitung

Ganz

Ganz ZR-DH1621NP Bedienungsanleitung

Ganz

Ganz NR4HL Bedienungsanleitung

Ganz

Ganz CDR-01S Bedienungsanleitung

Ganz

Ganz PixelMaster PRO NR16H Bedienungsanleitung

Ganz

Ganz ZR-DHC830NP Bedienungsanleitung

Ganz

Ganz DR16NRT Bedienungsanleitung

Beliebte DVR Handbücher anderer Marken

FLIR

FLIR M3100E Series Bedienungsanleitung

VTRACKPRO

VTRACKPRO FPRO300 Bedienungsanleitung

Swann

Swann NVR-7085 models Bedienungsanleitung

XtendLan

XtendLan DVR-1670C Bedienungsanleitung

urmet domus

urmet domus 1093/004AHD Bedienungsanleitung

Holux

Holux M1 Bedienungsanleitung

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Bedienungsanleitung

Whistler

Whistler D16VRS Bedienungsanleitung

Defender Security

Defender Security 82-20235 Bedienungsanleitung

MISUMI

MISUMI MP-WF100M Bedienungsanleitung

Speco

Speco D8HU Bedienungsanleitung

UST

UST DDR-E04AA Gebrauchsanweisung

Consolidated

Consolidated Digital Video Recorder Bedienungsanleitung

Mace

Mace DVR0404RW Kurzanleitung

RCA

RCA RTD315W Bedienungsanleitung

FSM

FSM Colibri Grande PRO Bedienungsanleitung

Hauppauge

Hauppauge HD PVR 2 Bedienungsanleitung

Identivision

Identivision ICR-PH161i PIONEER Bedienungsanleitung