GE RM94904 Bedienungsanleitung

Universal

Remote Control

RM94904

INSTRUCTION

MANUAL

94904 Revised Size 2/25/02 3:57 PM Page 1

Table OfContents

Button Description ...................1-3

Battery Installation .....................2

Program ming Your UniversalRemote

TV ..............................4

VCR ............................5

Cable /DVD ......................6

Code Search ..........................8

Code Retrieval........................9

Menu Functions ......................10

Troubleshooting ......................12

LostYour Codes?.....................13

Button Description

INDICATORLIGHT

The Indicator Lightflashes to show thatthe

remote is working.

POWER

The POWER button operates the same as your

originalremote (note:some RCA,GE and

Proscan models require you to press the

device key to turn the device on and the power

key to turn the device off).

SETUP

Used to program the remote or to search

through codes.

TV,VCR,CABLE,DVD/ AUX

The TV,VCR,CABLE and DVD/AUX buttons are

used to select the device you wantto control.

VOL &CHANNEL

The VOL (Volume)and CHA N NEL buttons

o perate the sam e as on your original

remote.The CHANNEL buttons are also used

to controlthe SKIP function for DVD and CD

Players.

94904 Revised Size 2/25/02 3:57 PM Page 2

MUTE

The Mute button operates the same as on

your originalremote.

PREV CH

The PREV CH (Previous Channel) button oper -

ates the same as on your originalremote.

0-9

The number buttons operate the same as on

your originalremote,and are used for enter-

ing device codes.

•

VCR

The TV

•

VCR button operates the TV

•

VCR func-

tion ofyour VCR.

ENTER

The ENTER button operates the same as on

your

originalremote.

REV,PLAY,FOR,REC,STOP,PAUSE

The REV (Rewind or Reverse),PLAY,FOR

(Forward),REC (Record),STOP,and PAUSE

buttons operate the same as on your original

VCR or remote.You mustpress the REC button

twice to begin recording.The VCR buttons can

also be used to controlthe functions for DVD

or CD Players.

The MEN U button call ups the TV,DVD,and

Satellite set-up menus.

Battery Installation

Your RM94904 Remote requires two (2)new

AA A alkaline batteries.To install the batteries:

1.On the back ofthe remote,push down on

the tab and lift the cover off.

2.Match the batteries to the + and - marks

inside the battery case,then insertthe

batteries.

3.Press the battery cover back into place.

94904 Revised Size 2/25/02 3:57 PM Page 3

SpecialProgramming Feature

This remote can be program med to control

any ofthese devices:

TV Satellite Receiver MiniShelf System

VCR DVD Player Audio Receiver

Cable Box CD Player

The TV device button is dedicated for a TV

only.The remaining buttons can be assigned

to any ofthe above devices (even though the

remote device buttons are screen-printed for

specific devices.Satellite and audio receiver

functions would be limited with this remote.

Button Description

94904 Revised Size 2/25/02 3:57 PM Page 4

Programming For TV

1.Manually turn

on the TV.

2.Press and hold

the SETUP

button until the

INDICATOR LIGHT

lights,then release

the SETUP

button.

3.Press and release the

TV button (the

INDICATOR LIGHT will

blinkthen remain lit).

4.Find the three digit

code for your TV in

the code listin the

back ofthis book

and enter it using the

Number Buttons.

After your code

is entered,the

INDICATOR LIGHT

will turn off.

5.Aim the remote at

your TV and press

the PO WER button.Your TV should turn off.

Note:Ifyour TV does notrespond,try all the codes for your

brand.Ifthe codes do notwork,or your brand is notlisted,

try the Code Search method on page 8.N OTE:Sometimes

a code listed will only include limited functions.Try other

codes which may include more functionality.

6.With your TV on,press

CHAN NEL UP.Ifthe TV

responds,no further

programming is

required.

7.Enter your code here

for easy reference.

BLINK

OFF

TV CODE

94904 Revised Size 2/25/02 3:57 PM Page 5

Programming For VCR

1.Manually turn

on the VCR.

2.Press and hold

the SETUP

button until the

INDICATOR LIGHT

lights,then release

the SETUP

button.

3.Press and release

the VCR button (the

INDICATOR LIGHT

will blinkthen remain

lit).

4.Find the three digit

code for your VCR

in the code listin

the back ofthis book

and enter it using

the Number Buttons.

After your code is

entered,the INDICATOR

LIGHT will turn off.

5.Aim the remote atyour

VCR and press the

POWER button.Your

VCR should turn off.

Note:Ifyour VCR does notrespond,try all the

codes for your brand.Ifthe codes do notwork,

or your brand is notlisted,try the Code Search

method on page 8.

6.With your VCR on,press

CHANNEL UP.Ifthe VCR

responds,no further

program ming is

required.

7.Enter your code

here for easy

reference.

BLINK

OFF

VCR CODE

94904 Revised Size 2/25/02 3:57 PM Page 6

Programming forCable /DVD

Use the CBL/DVD button to assign your cable box or

DVD player.This button could also be assigned to a

CDplayer,another TV,VCR or DVD player.

1.Manually turn on

the Cable Box,DVD

Player,or other device.

2.Press and hold the

SETUP button until

the INDICATOR

LIGHT lights,then

release the SETUP

button.

3.Press and release

the CAB/DVD button

(the INDICATOR LIGHT

will blinkthen

remain lit).

4.Find the three digit

code for your

device in the

code listin the

back ofthis book

and enter it using

the Number Buttons.

After your code is

entered,the INDICATOR

LIGHT will turn off.

5.Aim the remote at

your device and

press the PO WER

button.Your device

should turn off.

Note:Ifyour device

does notrespond,try all

the codes for your brand.Ifthe codes do notwork,

or your brand is notlisted,try the Code Search

method on page 8.

6.With your device

on,press CHA N NEL UP.

Ifthe device responds,

no further programming

is required.

7.Enter your code here

for easy reference.

BLINK

OFF

CAB/DVD/DEVICE CODE

94904 Revised Size 2/25/02 3:57 PM Page 7

Programming WithCodeSearch

Ifyour TV,VCR,or Cable Box does notrespond

after you have tried all the codes for your

brand,or if your brand is notlisted,try search-

ing for your code by following the steps

below.

1.Turn on the device

you wish to program.

2.Press and hold

SETUP until the

INDICATOR LIGHT

lights,then release

SETUP.

3.Press and release the

device button for the

device you are

program ming (TV,

VCR,CAB/DVD).

The INDICATOR

LIGHT will blinkonce.

For AU X,press AUX

then the device button

you are assigning to AUX.

4.Press and release POWER

until your device turns

off.Important: You

may have to press

POWER up to 200 times.

5.When your device turns

off,press the ENTER

button,the INDICATOR

LIGHT will go off.

BLINK

94904 Revised Size 2/25/02 3:57 PM Page 8

Retrieving Codes

Ifyou need to find the three-digit code for

your device,after your device is set-up using

Code Search,use this procedure.

1.Press and hold SETUP

until the INDICATOR

LIGHT lights,then

release SETUP.

2.Press and release the

device button for the

device’s code you

are retrieving (TV,

VCR or CAB/DVD,

CD player ).The

INDICATOR LIGHT

will blinkonce.

3.Press and release

SETUP.The

INDICATOR LIGHT

will turn off.

4.Starting with 0

on the keypad,

press the number

buttons in order (0-9)

until the INDICATOR

LIGHT blinks.

5.The number which

causes the

INDICATOR LIGHT

to blinkis the first

digit ofyour code.

6.Repeatstep 4 until you

have retrieved all three

numbers in the code.

BLINK

OFF

. . .

94904 Revised Size 2/25/02 3:57 PM Page 9

ons

The Menu is used to make changes such as

setting color,channels,timers,etc.

nu Mod

1.Push the DEVICE

button on the remote.

2.Push the MENU

button.

This puts the remote

in Menu Mode.The

Menu should now be

visible on the

television.The

INDICATOR LIGHT

will blinkcontinuously

to indicate the remote

is now in Menu

Mode.

While in MENU these

buttons will function

as follows:

VOL UP/DOW N buttons

will operate as CURSOR

RIGHT/LEFT.

CH+/- keys will operate

as CURSOR UP/DOW N.

For RCA,GE and ProScan,

pushing the MEN U button

will select the highlighted

item.The numeric buttons

may also be used to

select the MENU choice.

NOTE

Notall functions in competitive mod-

els and brands oftelevisions may be fully sup-

ported.

BLINK

94904 Revised Size 2/25/02 3:57 PM Page 10

Andere Handbücher für RM94904

Inhaltsverzeichnis

Sprachen:

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung