Gefen EXT-DIGAUD-241 Bedienungsanleitung
RMT IR Extender
RMT-2
Optional
Accessories
2x1 Digital Audio Switche
r
Switch Between Two Digital Audio Sources and One Digital Audio
Receiver or Amplifier
This simple to use Digital Audio Switcher allows you to connect two digital audio sources to a digital
audio receiver or amplifier with one input, making it a worthy addition to home theater, hi-fi system
with multiple audio sources.
Both digital audio sources remain live all the time and you can switch between the two at will.
Access is controlled with the unit's IR remote control or the manual selection button on the front
panel. Downtime is nonexistent--the switch occurs instantaneously.
How It Works
Simply connect both sources to the Digital Audio Switcher's inputs, then connect the Digital Audio
Switcher output to the receiver's output. Apply power by connecting the power supply and you're
ready to switch.
Features:
zConnects two digital audio sources to a receiver using one input
zSupports two formats: S/PDIF and optical
zEliminates the need to unplug and replug devices
zFront panel switching
zDiscrete IR remote (included)
zParallel remote port (RMT-2 not included)
zEasy to operate: sources are selected remotely or manually
Specifications:
zInput/Output: S/PDIF (Digital Coax), Optical TOSlink
zS/PDIF (Digital Coax): 96 kHz Performance
zPower Supply 5V DC
zPower Consumption: 5 watts (max)
zDimensions: 4" W x 1.25" H x 3.25" D
zShipping Weight: 2 lbs.
Package Includes:
zDigital Audio Extender
zRMT-2IR Remote Control
z5VDC Power Supply
zTwo TOSLINK fiber optic cables
zUser Manual
EXT-DIGAUD-241
Dystrybucja i sprzedaż: Meditronik Sp. z o.o.
02-952 Warszawa, ul. Wiertnicza 129, tel. (+48 22) 651-72-42, fax (+48 22) 651-72-46
http://www.meditronik.com.pl e-mail: [email protected]
2x1 Digital Audio
Switcher
USER MANUAL
www.gefen.com
Technical Support:
Telephone (818) 772-9100
(800) 545-6900
Fax (818) 772-9120
Technical Support Hours:
8:00 AM to 5:00 PM Monday through Friday.
Write To:
Gefen Inc.
c/o Customer Service
20600 Nordhoff St.
Chatsworth, CA 91311
www.gefen.com
Notice
Gefen Inc. reserves the right to make changes in the hardware, packaging and any
accompanying documentation without prior written notice.
2x1 Digital Audio Switcher is a trademark of Gefen Inc.
© 2007 Gefen Inc., All Rights Reserved
ASKING FOR ASSISTANCE
TABLE OF CONTENTS
Introduction
Features
Panel Descriptions
Connecting and Operating the 2x1 Digital Audio Switcher
RMT2-IR Installation
IR Extender Installation
Specifications
Warranty
1
2
3
4
5
6
7
8
Congratulations on your purchase of the ex•tend•it 2x1 Digital Audio Switcher. Your
complete satisfaction is very important to us.
Gefen’s line of HDTV switches, extenders, and splitters are designed to make yourA/V
equipment use more comfortable, more productive and less expensive.
The 2x1 Digital Audio Switcher allows access to multiple Digital Audio devices, using a
single Digital Audio reciever.
The ex•tend•it line offers solutions for noise, space and security concerns, data center
control, information distribution, conference room presentation, school and corporate
training environments.
Our Commitment
Gefen will always offer the finest quality product at the best possible price. Included in
that price is a lifetime of support from a team of outstanding engineers.
The ex•tend•it 2x1 Digital Audio Switcher allows two SPDIF or OPTICAL devices to be
switched easily in to one Digital Audio reciever. Simply connect your digital audio to the
digital out.
INTRODUCTION
1
FEATURES
Features
• Switches easily between any two Digital Audio sources
• Optional RMT-2 remote control
• TOSLINK cables are used to connect the TOSLINK inputs and 2x1 TOSLINK Digital
Audio Switcher output
• SPDIF cables are used to connect the SPDIF inputs and 2x1 SPDIF Digital Audio
Switcher output
• Installs in seconds
Includes:
(1) Digital Audio Switcher
(2) 6’ TOSlink cables
(1) 5VDC Power Supply
(1) RMT2-IR
2
PANEL DESCRIPTIONS
Connects to
5VDC power supply
Connects to IR
extender
IR eye
Indicates if port 1 or
port 2 is selected Selects port 1
or port 2
3
SPDIF Out Optical Out
SPDIF 1 SPDIF 2 OPT 2
OPT 1
PANEL
DESCRIPTIONS
Connecting and Operating the 2x1 Digital Audio Switcher
How to Connect the 2x1 Digital Audio Switcher to your devices
1Connect the digital audio cables from your devices into the 2x1 DigitalAudio Switcher
inputs.
2 Connect your digital audio receiver to the 2x1 DigitalAudio Switcher output.
3 Input 1 and 2 can either be S/PDIF or TOSlink, not both.
4 Regardless of the input type the output can be both S/PDIF and TOSlink.
5 Plug the 5VDC power supply into the 2x1 Digital Audio Switcher.
How to Operate the 2x1 Digital Audio Switcher
1 Use the front panel push button to switch between sources.
2 Alternatively, use the RMT2-IR remote control port to remotely toggle between sources.
4
RMT2-IR Installation
1. Remove battery cover from the back of the RMT2-IR remote.
2. Verify that dip switches 1 & 2 are in the down (OFF) position.
3. Insert the battery, hold the battery so that you can see the positive side facing up. The
side that is not marked must be facing down.
4. Test the RMT2-IR remote by pressing ONLY one button at a time. The indicator light
on the remote will flash once each time you press a button. WARNING: Do not press
multiple buttons simultaneously and do NOT press buttons rapidly. These actions will
cause the remote to reset and steps 1-4 will have to be repeated.
Note: The RMT2-IR ships with two batteries. One battery is required for operation, the
second battery is complimentary.
5
The optional IR extender allows you to relo-
cate your 2x1 HDMI Digital Audio Switcher
and still have IR control of the 2x1 HDMI
Digital Audio Switcher
IR Extender Instructions
How to Connect the IR Extender to the 2x1 Digital Audio Switcher
1 Open the unit so the circuit board below is accessible.
2Add a jumper to close the contact between the pins in the white circle
3 Move the jumper in the black circle from the local to the remote pins
4 Plug the IR Extender into the remote jack on the front of the unit
6
Inhaltsverzeichnis
Andere Gefen Schalten Handbücher
Gefen
Gefen EXT-HDMI1.3-442 Bedienungsanleitung
Gefen
Gefen HD-441 Bedienungsanleitung
Gefen
Gefen 2X2 VGA SWITCHER Bedienungsanleitung
Gefen
Gefen EXT-DVI-841DL Bedienungsanleitung
Gefen
Gefen EXT-DVI-841 Bedienungsanleitung
Gefen
Gefen PC Bedienungsanleitung
Gefen
Gefen VGA-4X1 Bedienungsanleitung
Gefen
Gefen ex-tend-it 4x4 HDTV Matrix Bedienungsanleitung
Gefen
Gefen ex tend it Bedienungsanleitung
Gefen
Gefen EXT-DVIKVM-841DL Bedienungsanleitung
Gefen
Gefen 6x2 HDMI Bedienungsanleitung
Gefen
Gefen DVIKVM-241DL Bedienungsanleitung
Gefen
Gefen HDMI-244 Bedienungsanleitung
Gefen
Gefen VGA-145 Bedienungsanleitung
Gefen
Gefen GTB-HD4K2K-441-BLK Bedienungsanleitung
Gefen
Gefen EXT-DP-441 Bedienungsanleitung
Gefen
Gefen HDTV-241AA Bedienungsanleitung
Gefen
Gefen GTV-MFS Bedienungsanleitung
Gefen
Gefen EXT-HDMI-841 Bedienungsanleitung
Gefen
Gefen VGA-422 Bedienungsanleitung
