Gefen EXT-USB-400FON Bedienungsanleitung
®
USB 400 FO
EXT-USB-400FON
User Manual
www.gefen.com
Technical Support:
Telephone (818) 772-9100
(800) 545-6900
Fax (818) 772-9120
Technical Support Hours:
8:00 AM to 5:00 PM PST Monday thru Friday, Pacific Time
Write To:
Gefen, LLC
c/o Customer Service
20600 Nordhoff St
Chatsworth, CA 91311
www.gefen.com
Notice
Gefen, LLC reserves the right to make changes in the hardware, packaging, and
any accompanying documentation without prior written notice.
USB 400 FO is a trademark of Gefen, LLC
All trademarks are the property of their respective owners.
© 2011 Gefen, LLC. All rights reserved.
All trademarks are the property of their respective companies.
ASKING FOR ASSISTANCE
Rev A6
CONTENTS
1 Introduction
2 Operation Notes
3 Features
4 Sender Unit Panel Layout
5 Sender Unit Panel Descriptions
6 Receiver Unit Panel Layout
7 Receiver Unit Panel Descriptions
8 Connecting And Operating The USB 400 FO Extender
8 Wiring Diagram
9 Troubleshooting The USB 400FO Extender
14 Specifications
15 Warranty
1
INTRODUCTION
Congratulations on your purchase of the USB 400 FO. Your complete satisfaction
is very important to us.
Gefen
Gefen delivers innovative, progressive computer and electronics add-on solutions
that harness integration, extension, distribution and conversion technologies.
Gefen’s reliable, plug-and-play products supplement cross-platform computer
systems, professional audio/video environments, and HDTV systems of all sizes
with hard-working solutions that are easy to implement and simple to operate.
The Gefen USB 400 FO
The USB 400 FO Extender supports all USB 2.0 devices, extending to 1640 feet
(500 meters) away from the USB source using 50/125m multi-mode fiber, or
900 feet (275 meters) using a 62.5/125 m multi-mode fiber. The receiver end is
also a four USB 2.0 hub.
By using fiber optic cables, the USB 400 FO extends a long distance from the
location of a computer. It provides an EMI-free solution for using USB at remote
locations.
How It Works
The USB 400 FO sender unit is connected to the source using the supplied USB
short cable. The USB peripheral(s) are connected to the receiver unit at the
remote end. Two LC-terminated multi-mode fiber optic cables are used to link the
sender to the receiver. The Receiver unit must be powered by a 5V DC power
supply. The Sender unit is powered by the USB bus.
Applications
The USB 400 FO is invaluable for applications where complete control of devices
is necessary when using USB when placing in restricted areas, such as medical
facilities and oil rigs. The USB 400 FO will connect with any USB-compliant
peripheral in all operating systems supporting USB 2.0.
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE USB 400 FO
This equipment provides outstanding extension facilities for any device or USB
application that requires a peripheral connection over a distance, such as a USB
camera or USB hard drive, keyboard, and mouse.
The USB 400 FO works like a USB hub with extension capabilities over a distance
of up to 1,640 feet. This means, for example, that a remote USB sensor can be
placed at a safe distance from the sender unit in situations that demand this type
of security.
The USB 400 FO signal controls the keyboard, mouse, trackball, and other USB
peripherals using send and receive units. The USB signal is extended by using
multi-mode fiber optic cabling.
The USB 400 FO uses dual multi-mode LC fiber optic cables to connect the sender
and receiver units.
FCC Radio Frequency Interference Statement Warning
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received including interference that may cause undesired
operation.
Requirements:
To complete the installation, you will also require the following items that are not
included with the product:
• USB 1.1 or 2.0 Compatible computer (host computer) with a USB compliant
operating system
• USB 1.1 or 2.0 Compatible device
• 2-strand multi-mode fiber optic cable with Duplex LC connectors (if using
surface cabling) OR, 2-strand fiber optic cabling with two information outlets
and two 2-strand fiber optic patch cords with Duplex LC connectors (if using
premise cabling) .
The Sender Unit and Receiver Unit are interconnected by up to 500 meters of
fiber optic cabling. Two strands of 50/125m (1640 feet max.) multi-mode fiber or
62.5/125m (900 feet max.) multi-mode fiber cabling are required. The cabling
subsystem must provide a duplex connection with crossover, and must be
terminated with Duplex LC connectors at both ends.
OPERATION NOTES
2
3
FEATURES
Features
• “Extreme USB” technology is used to extend the range of USB 2.0 devices
up to 1640 feet (500 meters) using 50/125m fiber-optic cables
• Receiver unit is also a USB 2.0 four-port hub
• Provides support for both low-speed and high-speed USB devices
• Fully backward-compliant with USB 1.1 and USB 2.0 specifications as
certified by the USB Implementation.
• Number of USB devices can be expanded using standard USB hubs
• Supports all operating systems including Windows®, Mac OS®, and Linux®
• Supports other USB peripherals and are used in devices such as PlayStation
and Wii.
• A secure method of USB control in areas where environmental conditions
prohibit access by people
• Metal box for better RF shielding
• Ideal as optical isolation from over-voltage and static electricity
• Supports High Speed devices up to 480Mbps
Package Includes
(1) Gefen USB-400FO Sender Unit
(1) Gefen USB-400FO Receiver Unit
(1) 6 ft. USB Cable (A-B)
(1) 5V DC Power Supply
(1) User Manual
4
SENDER UNIT PANEL LAYOUT
Front Panel
Back Panel
1234
65 7
5
SENDER UNIT PANEL DESCRIPTIONS
1 Power Indicator
LED turns bright blue when power is supplied.
2 Link Indicator
This LED turns bright green when a valid ExtremeUSB® link is established
between the Sender Unit and Receiver Unit.
3 Host Indicator
This LED turns bright green when the USB 400 FO system is properly
enumerated on the host PC. The LED blinks when in Suspend Mode.
4 Activity Indicator
This LED turns bright amber, indicating that data transmission is active between
the Sender Unit and Receiver Unit. The LED blinks intermittently with or without
a USB device plugged in. When the Sender Unit and Receiver Unit are in a
Suspend Mode, the LED is off.
5 Power port
An optional 5V power supply can be connected to the Sender unit to provide
power if the USB port on the host PC is not capable of delivering 500mA to the
unit.
6 USB Port
Used to connect the Sender unit to the host computer.
7 Link Port
Extension link Duplex LC fiber optic transceiver port.
6
RECEIVER UNIT PANEL LAYOUT
Front Panel
Back Panel
3456
87
12
7
RECEIVER UNIT PANEL DESCRIPTIONS
1 USB Port (1-4)
USB device input ports.
2 USB Indicator (1-4)
This LED indicates when a USB device is connected to the Device Port. Solid
green when device is plugged in and active. Off when device is in a suspend
mode or Receiver unit is powered off. Orange when the Receiver unit detects an
overcurrent condition, or if the attached USB device attempts to draw more than
the 500mA current.
3 Power Indicator
This LED turns bright blue when power is supplied.
4 Link Indicator
This LED turns bright green when a valid ExtremeUSB® link is established
between the Sender Unit and Receiver Unit.
5 Host Indicator
This LED turns bright green when the USB 400 FO system is properly
enumerated on the host PC. The LED blinks when in Suspend Mode.
6 Activity Indicator
This LED turns bright amber, indicating that data transmission is active between
the Sender and Receiver. The LED blinks intermittently with or without a USB
device plugged in. When the Sender Unit and Receiver Unit are in a Suspend
Mode, the LED is off.
7 Power port
Connects to the 5V DC power supply.
8 Link Port
Connect one end of a duplex LC fiber optic cable to this port.
Andere Handbücher für EXT-USB-400FON
3
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Gefen Schalten Handbücher
Gefen
Gefen EXT-HDMI1.3-244 Bedienungsanleitung
Gefen
Gefen EXT-DVIKVM-441DL Bedienungsanleitung
Gefen
Gefen 2X2 VGA SWITCHER Bedienungsanleitung
Gefen
Gefen EXT-MINIDVI-241N Bedienungsanleitung
Gefen
Gefen 2X1 DVI KVM SWITCHER Bedienungsanleitung
Gefen
Gefen DIGAUD-241 Bedienungsanleitung
Gefen
Gefen GTB-MHDMI1.3-442 Bedienungsanleitung
Gefen
Gefen 4x1 Multiview Seamless Switcher Bedienungsanleitung
Gefen
Gefen Digital Audio Switcher Bedienungsanleitung
Gefen
Gefen 4K ULTRAHD EXT-UHD-88 Bedienungsanleitung
Gefen
Gefen SL Switcher Bedienungsanleitung
Gefen
Gefen MINIDVI-241 Bedienungsanleitung
Gefen
Gefen EXT-USB-400FON Bedienungsanleitung
Gefen
Gefen DVIKVM-441 Bedienungsanleitung
Gefen
Gefen EXT-DP-EDIDP Bedienungsanleitung
Gefen
Gefen EXT-HDMI1.3-442 Bedienungsanleitung
Gefen
Gefen DVI-841 Bedienungsanleitung
Gefen
Gefen HDMI-441 Bedienungsanleitung
Gefen
Gefen HDTV-241 Bedienungsanleitung
Gefen
Gefen EXT-DVI-841DL Bedienungsanleitung
