GPL H.264 Bedienungsanleitung

Multilingual Version

English

中文

日本語

Français

Deutsch

Español

ﻲﺑرــــــــــﻋ

Deutsch

405Z

a798_796_792_m686_688_752_757_759_k675_677_679_pv_h_Quick_V1.1

H.264 Network DVR

Quick Start

GUI Display with USB Mouse Control

User Manual Online Download: www.surveillance-download.com/user/79xpv.swf

Please read instructions thoroughly before operation and retain it for future reference.

For the actual display & operation, please refer to your DVR in hand.

IMPORTANT SAFEGUARD

CAUTION

RISK OF ELECTRIC SHOCK

CAUTION:

To reduce the risk of electric shock, do not expose this apparatus to rain or moisture. Only operate this apparatus from the type of

power source indicated on the label. The company shall not be liable for any damages arising out of any improper use, even if we

have been advised of the possibility of such damages.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of

uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of

electric shock to persons.

This exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature accompanying the appliance.

All lead-free products offered by the company comply with the requirements of the European law on the Restriction of

Hazardous Substances (RoHS) directive, which means our manufacture processes and products are strictly “lead-free” and

without the hazardous substances cited in the directive.

The crossed-out wheeled bin mark symbolizes that within the European Union the product must be collected separately at

the product end-of-life. This applies to your product and any peripherals marked with this symbol. Do not dispose of these

products as unsorted municipal waste. Contact your local dealer for procedures for recycling this equipment.

This apparatus is manufactured to comply with the radio interference requirements.

Disclaimer

The information in this manual was current when released. We reserve the right to revise or remove any content in this manual at any time. We

do not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of this manual. For the actual display

& operation, please refer to your DVR in hand. The content of this manual is subject to change without notice.

Grounding

This is a Safety Class 1 Product (provided with a protective earthing ground incorporated in the power cord). The mains plug shall only be

inserted in a socket outlet provided with a protective earth contact. Any interruption of the protective conductor inside or outside of the

instrument is likely to make the instrument dangerous. Intentional interruption is prohibited.

Water & Moisture

Do not expose this product to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the product.

MPEG4 Licensing

THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND

NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD

(“MPEG-4 VIDEO”) AND/OR (ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND

NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4

VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT

RELATING TO PROMOTIONAL INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE

HTTP://WWW.MPEGLA.COM.

GPL Licensing

This product contains codes which are developed by Third-Party-Companies and which are subject to the GNU General

Public License (“GPL”) or the GNU Lesser Public License (“LGPL”).

The GPL Code used in this product is released without warranty and is subject to the copyright of the corresponding

author.

Further source codes which are subject to the GPL-licenses are available upon request.

We are pleased to provide our modifications to the Linux Kernel, as well as a few new commands, and some tools to get

you into the code. The codes are provided on the FTP site, and please download them from the following site or you

can refer to your distributor:

http://download.dvrtw.com.tw/GPL/076D_Series/arm-linux-2.6.tar.gz

TABLE OF CONTENTS

1. GUI DISPLAY WITH USB MOUSE CONTROL............................................................................1

1.1 Connect USB Mouse ..........................................................................................................................................1

1.2 Quick Menu Bar ..................................................................................................................................................1

1.3 Main Menu ..........................................................................................................................................................1

Main Menu Structure..........................................................................................................................................2

2. FRONT AND REAR PANELS.......................................................................................................4

2.1 Front Panel .........................................................................................................................................................4

2.2 Rear Panel..........................................................................................................................................................5

3. CONNECTION AND SETUP ........................................................................................................6

3.1 SATA HDD Installation ........................................................................................................................................6

3.2 Camera Connection............................................................................................................................................7

3.2.1 Normal Camera Connection .....................................................................................................................7

3.2.2 PTZ Camera Connection ..........................................................................................................................8

3.3 External Device Connection................................................................................................................................9

3.4 DVR Power On ...................................................................................................................................................9

3.5 Date and Time Setting ......................................................................................................................................10

3.6 Clear Hard Disk.................................................................................................................................................10

3.7 Password Setting..............................................................................................................................................11

4. BASIC OPERATION...................................................................................................................12

4.1 Live Page..........................................................................................................................................................12

4.2 Record Icon ......................................................................................................................................................12

4.3 Playback ...........................................................................................................................................................12

Playback Control..............................................................................................................................................13

Event Search ...................................................................................................................................................13

Audio Playback................................................................................................................................................13

4.4 User Level Switch .............................................................................................................................................13

4.5 VGA Output Resolution Support .......................................................................................................................14

4.6 System Sources Reallocation ...........................................................................................................................15

APPENDIX 1 PIN CONFIGURATIONS..........................................................................................16

APPENDIX 2 PUSH VIDEO CONFIGURATION ............................................................................22

A2.1 PIN Connection ..............................................................................................................................................22

A2.2 Configuration ..................................................................................................................................................23

APPENDIX 3 MOBILE SURVEILLANCE VIA EAGLEEYES.........................................................24

A3.1 Prerequisites...................................................................................................................................................24

A3.2 Where to download.........................................................................................................................................24

APPENDIX 4 COMPATIBLE USB FLASH DRIVE LIST................................................................25

APPENDIX 5 COMPATIBLE SATA HDD LIST...............................................................................26

APPENDIX 6 DVR BATTERY REPLACEMENT ............................................................................27

1. GUI DISPLAY WITH USB MOUSE CONTROL

1.1 Connect USB Mouse

Connect your USB mouse to one of the USB ports on the DVR front panel, and check if there’s a mouse icon ( )

on the screen, indicating the USB mouse is detected properly.

Move your mouse to enter the DVR password with the password keypad. The default administrator password is

0000. The status will be changed from (key lock) to (administrator), and the quick menu bar appears on

the left side of the screen.

Note: There are two user levels for DVR access which can be set in the main menu “SYSTEM” 

“TOOLS”. For details, please refer to your user manual.

Password Input Quick Menu: Close

1.2 Quick Menu Bar

Move to the arrow mark to extend the quick menu bar and show the five functions as follows:

Quick Menu: Open

Click to show the channel switch panel and select the channel you want.

For details, please refer to “3.2 Quick Menu Bar” in the user manual.

Click to display the playback control panel, and click to play the latest

recorded video clip, or click to enter the search list.

Switch to the channel you want first, and click to enter the zoom-in

mode. In this mode, click and drag the red frame on the bottom left of the

screen to move to the place you want to see. To exit this mode, click .

Click to select the audio channel you want:

In the live mode, only the live audio channels can be selected.

In the playback mode, live and playback audio channels can be selected.

Click to enter the PTZ mode and show the PTZ camera control panel.

Click to show the power off panel to either halt or reboot the system.

1.3 Main Menu

Right-click anywhere on the screen to show the main menu as follows, and right-click again to exit.

Main Menu

QUICK START Click to set the status display, image settings, and date &

time.

DATE SETUP Click to set the date display and daylight saving.

SYSTEM Click to set the system configurations.

EVENT INFORMATION Click to enter the event search menu.

ADVANCED CONFIG Click to set CAMERA, DETECTION, ALERT,

NETWORK, DISPLAY, RECORD, DEVICES & NOTIFY.

SCHEDULE SETTING Click to set record timer, detection timer, and alarm timer.

Main Menu Structure

QUICK START GENERAL CHANNEL TITLE

EVENT STATUS

DATE DISPLAY

MOUSE SENSITIVITY

PRIORITY (For 4CH Models Only)

RECORD CONFIG

TIME SETUP DATE

TIME

DATE SETUP DATE INFO DISPLAY DATE OF MODE

FORMAT

DAYLIGHT DAYLIGHT SAVING

SYSTEM ACCOUNT USER LEVEL

TOOLS LANGUAGE

ADVANCED LOGIN

ADMIN PASSWORD

OPERATOR PASSWORD

UPGRADE

BACKUP CONFIG

RESTORE CONFIG

SYSTEM INFO BAUD RATE

HOST ID

AUTO KEY LOCK

R.E.T.R. (For Selected Models Only)

CLEAR HDD

RESET DEFAULT

REMOTE CONTROL ID

SERIAL TYPE

VIDEO FORMAT

VERSION

BACKUP DATA (USB)

BACKUP DATA (DVD) (For Selected Models Only)

BACKUP LOG (USB)

EVENT INFORMATION QUICK SEARCH

EVENT SEARCH

HDD INFO

EVENT LOG

BACKUP LIST

ADVANCED CONFIG CAMERA BRIGHTNESS

CONTRAST

SATURATION

HUE

COV.

REC

CHANNEL TITLE

DETECTION LS

MOTION

ALARM

AREA

ALERT EXT. ALERT

INT. BUZZER

KEY BUZZER

VLOSS BUZZER

MOTION BUZZER

ALARM BUZZER

HDD BUZZER

ALARM DURATION (SEC)

HDD NEARLY FULL (GB)

NETWORK NETWORK

SNTP

FTP

E-MAIL

DDNS

ADVANCED CONFIG DISPLAY DE-INTERLACE (For Selected Models Only)

FULL SCREEN DURATION

QUAD SCREEN DURATION (For Selected Models Only)

DWELL SCREEN DURATION (For Selected Models Only)

DISPLAY COVERT

HDD DISPLAY MODE

VIDEO OUTPUT (For Selected Models Only)

ALPHA BLENDING

VGA OUTPUT

VGA DEINTERLACE (For Selected Models Only)

COMPOSITE DEINTERLACE (For Selected Models Only)

RECORD MANUAL RECORD

EVENT RECORD

TIMER RECORD

PRE-ALARM RECORD

OVERWRITE

EVENT RECORD ALL CH.

KEEP DATA LIMIT (DAYS)

RECORD CONFIG

DEVICES DEVICE

PROTOCOL

RATE

NOTIFY PUSH VIDEO

MESSAGE MAIL

VIDEO MAIL

SCHEDULE SETTING RECORD

DETECTION

ALARM

2. FRONT AND REAR PANELS

2.1 Front Panel

1) LED Indicators

HDD is reading or recording.

An alarm is triggered.

Timer recording is on.

Under playback status.

DVR is powered on.

2) (▲) / (▼) / (◄) / (►)

Press ▲/ ▼/ ◄/ ►to move up / down / left / right.

In the playback mode:

Press “” to pause playback.

Press “” to stop playback.

Press ““ to fast forward.

Press ““ to fast rewind.

3) MENU

Press to enter the main menu.

4) ENTER

Press to confirm the setting.

5) LIST (Event List Search)

Press to quickly search the recorded files by event lists: RECORD / MOTION / ALARM / TIME, or select FULL to

show all the event logs.

To quickly search the time you want, select “QUICK SEARCH”. Set the time range you want, and select “Start”

to play the recorded video clip during the specified time.

6) PLAY

Press to playback the latest recorded data.

7) SLOW

In the playback mode, press to show slow playback.

8) ZOOM

Press to enlarge the picture of selected channel in the FRAME or FIELD recording mode.

9) SEQ

Press to display each channel in full screen one by one starting from CH1. When the last channel is displayed, it

will repeat from CH1 again. To exit this mode, press “SEQ” again.

10)

Press to show the 4 channel display mode.

11) CH1 ~ 16 / 1 ~ 8 / 1 ~ 4

Press the channel number buttons to select the channel to display.

12) AUDIO (SLOW + ZOOM)

Press “SLOW” + “ZOOM” to select live or playback audio from audio channel 1~4.

Live audio from audio channel 1~4

(indicated in white) Playback audio from audio channel 1~4

(indicated in yellow)

Audio channel unselected

13) P.T.Z. ( + SEQ)

Press “ ” + “SEQ” at the same time to enter / exit the PTZ control mode.

14) USB port

There are two USB ports on the front panel, one for connecting your USB mouse for mouse control, and the

other one for connecting your USB flash drive for video backup.

Note: It’s not allowed to have two USB mice or two USB flash drives connected on the front panel.

For the compatible USB flash drive list, please refer to “APPENDIX 3” in the user manual.

15) (For Selected Models Only)

Press “ ” to open / close the DVD Writer.

2.2 Rear Panel

1) 75Ω/ HI-IMPEDANCE (For Selected Models Only)

When using Loop function, please switch to HI-IMPEDANCE. When you don’t use Loop function, please switch

to 75Ω.

2) INPUT (1 ~ 16 / 1 ~ 8): Connect to the video connector of a camera.

VIDEO IN (1 ~ 4): Connect to the video connector of a camera.

LOOP (1 ~ 16 / 1 ~ 8) (For Selected Models Only):Video output connector.

Note: The DVR will automatically detect the video system of the camera, please make sure that the

cameras are properly connected to the DVR and power-supplied before the DVR is turned on.

3) AUDIO IN

Connect to the audio connector of a camera if the camera supports audio recording.

Note: To make a video backup with audio, make sure the camera which supports the audio function is

connected to the video-in channel and audio-in channel. For example, the audio data from audio

CH1 will be recorded with the video data from video CH1.

4) AUDIO OUT

Connect to a speaker with mono audio output.

Note: To know how many audio outputs your DVR supports, please refer to its specifications.

5) MONITOR

Connect to a CRT monitor for video output.

6) CALL (For Selected Models Only)

Connect to a monitor specific for sequence display.

7) VGA

Connect to a LCD monitor directly.

8) HD Display (For Selected Models Only)

Connect to the port of the monitor which supports HD video output.

9) IR (For Selected Models Only)

Connect the optional IR receiver extension cable for remote control.

10) EXTERNAL I/O

This port is used to connect external devices (such as speed dome cameras or external alarm devices, etc).

For detailed I/O port PIN configuration, please refer to “APPENDIX 1 PIN CONFIGURATIONS” at page 16.

11) LAN

Connect to Internet by LAN cable.

12) DC 19V

Connect to the supplied adapter.

13) Power Switch

Switch to “” to turn on the power, and “” to turn off the power.

3. CONNECTION AND SETUP

Before the DVR is powered on, make sure you have installed a hard disk and connected at least one camera.

For details, please refer to the following sections.

Note: The DVR is designed to automatically detect the video system of the connected cameras (NTSC

or PAL). To make sure the system detection is correct, please check if the cameras are

connected to the DVR and power-supplied before the DVR is powered on.

3.1 SATA HDD Installation

A SATA hard disk must be installed before the DVR is powered on.

Note: It’s recommended to clear all data in the hard disk when the DVR is powered on and the date &

time are set correctly to ensure the recorded data are not mixed with other data previously saved

in the same hard disk. For details, please refer to “3.6 Clear Hard Disk” at page 10.

For 16CH & 8CH Models

Step1:Loose the screws on the upper cover and open the upper cover of the DVR.

Note: The DVR cover is made of metal. Please be careful with its edge when you remove the cover.

Step2:There are two hard disk brackets for this DVR as indicated on

the right picture.

2-1 To install on the first bracket

Remove the bracket, and align the screw holes of the bracket

with the hard disk’s screw holes. Make sure the PCB side of

the hard disk is facing up.

Fasten the hard disk to the bracket, and connect the power

connector and data bus connector to the hard disk. Then,

replace the bracket to DVR.

2-2 To install on the second bracket

Connect the power connector and data bus connector to the

hard disk.

When connecting the power cable, make sure the cable is

passed through the power cable of DVD writer if your DVR is

equipped with a DVD writer. This is to prevent the hard disk

power cable from interfering with the fan spinning.

Align the screw holes of the bracket with the hard disk’s

screw holes. Make sure the PCB side of the hard disk is

facing up. Then, fasten the hard disk to the bracket.

Step3:Close the upper cover of the DVR, and fasten all the screws you loosened in Step1.

For 4CH Model

Step1:Loose the screws on the upper cover and remove it from the DVR. Find the hard disk bracket located on

the DVR base.

Step2:Get a compatible hard disk, and connect it to the power connector and data bus connector.

Inhaltsverzeichnis

Sprachen:

Andere GPL DVR Handbücher

GPL

GPL 16CH IVR Bedienungsanleitung

Beliebte DVR Handbücher anderer Marken

FLIR

FLIR M3100E Series Bedienungsanleitung

VTRACKPRO

VTRACKPRO FPRO300 Bedienungsanleitung

Swann

Swann NVR-7085 models Bedienungsanleitung

XtendLan

XtendLan DVR-1670C Bedienungsanleitung

urmet domus

urmet domus 1093/004AHD Bedienungsanleitung

Holux

Holux M1 Bedienungsanleitung

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Bedienungsanleitung

Whistler

Whistler D16VRS Bedienungsanleitung

Defender Security

Defender Security 82-20235 Bedienungsanleitung

MISUMI

MISUMI MP-WF100M Bedienungsanleitung

Speco

Speco D8HU Bedienungsanleitung

UST

UST DDR-E04AA Gebrauchsanweisung

Consolidated

Consolidated Digital Video Recorder Bedienungsanleitung

Mace

Mace DVR0404RW Kurzanleitung

RCA

RCA RTD315W Bedienungsanleitung

FSM

FSM Colibri Grande PRO Bedienungsanleitung

Hauppauge

Hauppauge HD PVR 2 Bedienungsanleitung

Identivision

Identivision ICR-PH161i PIONEER Bedienungsanleitung