Grundig YACHT BOY 400 Bedienungsanleitung

WORLD RECEIVER

YACHT BOY 400

WORLD RECEIVER

YACHT BOY 400

ON TIME TIME 1/2 FREE STORE

ON/OFF

SLEEP

AUTO

40 STATION MEMORIES

SSB

FM 1 2 3

AM 4 5 6

7 8 9

RESET

LOCK FREQU./METER AUTO TUNING STEP

TUNING

MEMO

LW/MW/SW/FM STEREO PLL SYNTHESIZED DUAL CONVERSION

8 9 . 6

6 0

TIME I

SLEEP

MHz

TUNING

0 . . . 1 . . . 2 . . . 3 . . . 4 . . . 5

Contents

Your Unit at a Glance

Display ................................................................. 04

Front of Unit............................................................ 06

Top of Unit ............................................................. 08

Right Side of Unit ..................................................... 09

Left Side of Unit ....................................................... 09

Rear of Unit ............................................................ 09

Aerials

Power Supply

Mains Operation ...................................................... 11

Battery Operation ..................................................... 11

Battery Check .......................................................... 11

Data Protection (Mains and Battery Operation).................. 12

RESET Button .......................................................... 12

General Operation

Switching On/Off and Locking....................................... 13

Direct Entries .......................................................... 13

Display Illumination .................................................. 13

Volume and Tone ..................................................... 14

Waveband Selection.................................................. 14

Station Tuning

Frequency Tuning in the FM Band.................................. 15

Frequency Tuning in the AM Band.................................. 15

Station Tuning with the Numeric Buttons ......................... 17

Entering a Meter Band

Storing, Calling Up, and Clearing

What Can You Store?..................................................20

Checking the Reception Frequency ................................ 20

Creating/Overwriting a Memory Position.......................... 20

Calling Up Stored Stations .......................................... 20

Indicating Free Memory Positions ................................. 21

Clearing a Memory Position......................................... 21

Going to Sleep to Music

The Clock

Setting the Clock (TIME I) ........................................... 23

Setting the Clock (TIME II) .......................................... 23

Clock Time Indication (TIME I/ II) .................................. 23

Contents

Automatic Switch-On/ Wake-Up Function

Entering a Switch-On Time .......................................... 24

Checking the Entered Switch-On Time............................. 24

Wake-Up with Radio/Automatic Switch-On ....................... 24

Wake-Up with Sound Signal/Date Reminder ..................... 25

Clearing the Wake-Up Function..................................... 25

Special Functions on AM

SSB Mode (Amateur Radio Reception) ............................ 26

Interferences........................................................... 26

Specification

Hints – Prescriptions ................................................. 29

Radio Stations......................................................... 29

Your Unit at a Glance

SNOOZE LIGHT

SW EXT. ANT. DX LOCAL STEREO MONO

WIDE NARR DC 9V

YACHT BOY 400

ON TIME TIME 1/2 FREE STORE

ON/OFF

SLEEP

AUTO

FM 1 2 3

AM 4 5 6

7 8 9

RESET

LOCK FREQU./METER AUTO TUNING STEP

TUNING

MEMO

LW/MW/SW/FM STEREO PLL SYNTHESIZED DUAL CONVERSION

40 STATION MEMORIES SSB

°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°

VOLUME TONE SSB FINE TUNING

LOW HIGH OFF 0N +

Your Unit at a Glance

Display

Optimum read-off quality will be obtained when the set is brought into

a tilted position. For this, use the swing-out support at the back of the

unit.

ON-TIME

Wake-up time/switch-on time

If ON-TIME is indicated, the wake-up time is shown

below (in the left numeric block).

88:88 Left numeric block

a. With radio switched on:

1) Clock time indication (TIME I or TIME II).

2) Wake-up time indication (can be called up by

pressing the ¢AUTO button).

3) Sleep time indication.

b. With radio switched off: Wake-up time indication.

Battery check

When this indication appears, the batteries should be

replaced.

Tuning/field strength indication

The reception quality corresponds to the length of the

tuning bar.

TUNING

0... 1.. . 2... 3... 4... 5

IIIIIIIIIIIIIIIIIIII

BATT. CHECK

8.8.8.8.8

8 8:8 8

8 8

ON-TIME TIME II

SLEEP LOCK

kHz

MHz

FREE

m kHz

MEMORY

STEP

BATT. CHECK

TUNING

0 . . . 1 . . . 2 . . . 3 . . . 4 . . . 5

¤ âWake-up mode symbols

You can select the wake-up mode (radio ¤or sound

signal â) by pressing the ¢AUTO button.

TIME II

Time I/II

You can select between two times (2 different time

zones).

Indication of the respective time:

– In the left numeric block with the radio switched on.

– In the large numeric block with the radio switched

off.

Sleept time

A sleep time (operating time) is entered (10, 20, 30,

40, 50 or 60 minutes).

When entering the time, it will briefly be indicated in

the left numeric block.

When this indication is visible, all buttons are locked,

except

– the ¢ON/OFF button (this can further be used to

switch off the radio);

– the ¶SNOOZE button (the functions of this but-

ton are retained).

LOCK

SLEEP

8.8.8:8.8 Large numeric block

With the radio switched on: Frequency indication and

special messages (e.g., EFF8F).

With the radio switched off: Time 1 or time 2

(e.g., 2:04).

88 Bottom numeric block

With the radio switched off: Seconds indication.

With the radio switched on: See following descrip-

tion.

FREE

Free memory position

Indicates the number of a free memory position.

MEMORY

88 Memory position

Indicates the number of the memory position on

which the stored frequency is currently received.

STEP

kHz

Tuning step

Indicates the width of the manual tuning steps in the

AM wavebands (1, 5, 9 or 10 kHz).

Meter band indication

Indicates the number of the meter band selected.

Your Unit at a Glance

)Stereo

Indication in the case of stereo broadcasts.

MW kHz

SW MHz

Indication of the waveband (FM/LW/MW/SW) and

the frequency.

The associated numeric value is indicated in the large

numeric block.

Your Unit at a Glance

Front of Unit

Multifunction display

(Description see further up)

ON/OFF On/off button

For switching the unit on and off.

You can switch the unit off even if all buttons are

locked (in LOCK position).

SLEEP Sleep button

For entering a time after which the unit is switched

off (sleep time).

Initial value: 60 minutes. This value is decreased in

steps of 10 minutes by repeatedly pressing this but-

ton.

The following order is run through:

60 / 50 / 40 / 30 / 20 / 10 /Radio off /

Radio on for 60 min. / 50 ... .

Short pressure on the ¢SLEEP button: Indication

of the remaining sleep time for approx. 5 seconds in

the display (left numeric block).

AUTO AUTOMATIC button

For switching between the three function modes:

– Wake-up with radio. The display indicates ¤.

– Wake-up with sound signal (also with switched-on

radio). The display indicates â.

– Wake-up function off. When switching to this

function, the display (left numeric block) indicates

for approx. 5 seconds "-:--".

ON TIME Switch-on time

For calling up the wake-up time (in the left numeric

block) when the radio is switched on.

For setting the wake-up time (switch-on time)

(e.g., 7 . 3 0 ON-TIME = 7:30).

TIME 1/2 Time I/II

For selecting between Time I and Time II.

For setting and calling up the times I and II, e.g.,

2 1 . 4 0 TIME I/II or TIME I/II 2 1 . 4 0 TIME I/II.

FREE Free

Indicates free memory positions in increasing order.

Two successive pressures on this button will clear

occupied memory positions (e.g., 4 FREE FREE).

STORE Store in memory

You can store in memory up to 40 stations.

To avoid redundant storing, first check whether the

currently received station has already been stored.

If the station has not yet been stored, enter the num-

ber of the desired memory position and store the sta-

tion in memory by pressing the STORE button (e.g.,

1 3 STORE).

If the selected memory position is not free, the indi-

cation will flash for approx. 5 seconds. The memory

position will not be overwritten.

Your Unit at a Glance

Two pressures on the button will overwrite occupied

memory positions (e.g., 23 STORE STORE): The se-

lected memory position is overwritten and occupied

by the station currently tuned to.

FM VHF

For selecting the desired FM (VHF) band.

You will hear the last station tuned to in this wave-

band (Last Station Memory).

For clearing incorrect numeric entries.

AM AM

For switching to the AM wavebands.

Repeated pressures on this button will select the

wavebands in the following order:

LW – MW – SW – LW – MW – etc.

You will hear the station last received in the respec-

tive waveband (Last Station Memory).

For clearing incorrect numeric entries.

RESET For clearing all stored data (memory positions, clock

time).

For resetting an eventually blocked keyboard (e.g.,

after static charges).

LOCK Key lock

For locking all keys except the

¢ON/OFF button (for switching off) and the

¶SNOOZE button.

0... 9,¢

.Numeric buttons and decimal point

For direct numeric entries.

Two pressures on this button will clear incorrect

numeric entries.

FREQU./METER For entering frequencies

(e.g., 1 0 7 . 7 FREQU./ METER = FM 107.7 MHz).

For entering meter bands

(e.g., 1 3 FREQU./METER = 13 m).

MEMO wFor calling up the memory positions 1 ... 40

(e.g., 2 0 MEMO w= call-up of memory position 20).

Press once: Next higher memory position.

Press and keep pressed longer than 1 s: Automatic

memory position selection in ascending order.

The automatic memory position select function stops

for approx. 5 seconds on each memory position so

that the station received on it can be checked. A fur-

ther pressure on the MEMO wbutton will terminate

this function.

Your Unit at a Glance

MEMO qFor calling up the memory positions (as with ME-

w).

Press once: Next lower memory position.

Press and keep pressed longer than 1 s: Automatic

memory position selection in descending order.

The automatic memory position select function stops

for approx. 5 seconds on each memory position so

that the station received on it can be checked. A fur-

ther pressure on the MEMO qbutton will terminate

this function.

TUNING w/qFor manual step-by-step tuning in direction of

higher or lower frequencies.

Keep button pressed: Frequency scan up or down.

STEP For selecting the manual tuning steps (the respective

waveband must have been selected).

LW 1 kHz or 9 kHz

SW 1 kHz or 5 kHz

MW 1 kHz or 9 kHz resp. 10 kHz

For selecting the tuning step 9 kHz or 10 kHz in the

MW band, the unit must be switched off with the

¢ON/OFF button.

AUTO TUNING Automatic station tuning

Press briefly: Automatic station tuning in direction of

higher frequencies.

Keep pressed longer then 0.5 s: Automatic station

tuning in direction of lower frequencies.

Top of Unit

Telescopic aerial

for FM and SW reception.

SNOOZE Snooze button

Press once to switch off the radio or the alarm func-

tion after wake-up. After five minutes, the wake-up

function will be repeated (sound signal or radio).

Keep pressed the button longer than 2 seconds to

switch off the wake-up function. The function will be

retained for the following day(s).

If the SNOOZE button is not pressed, the sound signal

will sound for 5 minutes or the radio play for 60 minu-

tes. After that, the respective function will be switched

off.

LIGHT Display illumination

Press this button to illuminate the display. After 10

seconds, the illumination will automatically be swit-

ched off.

The duration of the display illumination will be increa-

sed if any other button will be pressed within this

10-seconds period.

A pressure on the ¢ LIGHT button will immediately

switch off the display illumination.

Your Unit at a Glance

Right Side of Unit

FINE TUNING Fine tuning

For fine tuning on SSB reception.

SSB SSW on/off switch

For switching on and off the SSB mode (Single Side

Band reception).

SSB is especially used for amateur SW radio recep-

tion.

TONE Tone control

Two positions: HIGH (treble) and LOW (bass).

VOLUME Volume control

Left Side of Unit

SW EXT.ANT Socket for external aerial

Aerial connection for SW reception. For external aeri-

al with 3.5 mm ø jack plug.

DX/LOCAL Sensitivity switch

Normal position is "DX" (distant reception).

If the signal is too strong resulting in reception inter-

ferences, set the switch to "LOCAL".

STEREO MONO On FM: Mono/stereo switch.

WIDE NARR On AM: Wide/narrow switch.

In the FM waveband, this switch is used to select

between mono and stereo reception.

In the AM wavebands, the same switch is used for

changing the bandwidth.

UHeadphone/earphone socket

For headphone or earphone with jack plug of

3.5 mm ø (32 Ohm impedance). Connecting a head-

phone disconnects the built-in loudspeaker. For this

reason, the headphone must be disconnected if you

wish to be woken up by the radio.

YDC socket

DC 9V For connecting a commercial plug-in mains unit with

coaxial plug (outer diameter 5.5 mm, inner diameter

2.1 mm; output voltage 9.0 V=; mains voltage

230 V ¦, 50/60 Hz; neutral conductor connected to

earth Y).

Rear of Unit

Swing-out support

Swing out this support to bring the unit into a tilted

position.

On the support there is an illustration showing the

time zones of the earth.

Below the support there is the type plate of the unit.

Battery compartment

For six 1.5V batteries (IEC LR6, UM-3).

Andere Handbücher für YACHT BOY 400

Inhaltsverzeichnis

Andere Grundig Empfänger Handbücher

Grundig

Grundig M 100-ADPL Bedienungsanleitung

Grundig

Grundig GSS.box DSI 400 Bedienungsanleitung

Grundig

Grundig DSR 1750 MICRO Bedienungsanleitung

Grundig

Grundig Yacht Boy 2000 Bedienungsanleitung

Grundig

Grundig STR 7100 Bedienungsanleitung

Grundig

Grundig DTR 1560 MICRO Bedienungsanleitung

Grundig

Grundig DTR 2544 Bedienungsanleitung

Grundig

Grundig SAT STC 1200 Bedienungsanleitung

Grundig

Grundig STE 1000 Bedienungsanleitung

Grundig

Grundig Satellit 650 Bedienungsanleitung

Grundig

Grundig R 1000 DPL Bedienungsanleitung

Grundig

Grundig STR 600 AP Bedienungsanleitung

Grundig

Grundig STR 7100 Bedienungsanleitung

Grundig

Grundig GUFSAT01SD Bedienungsanleitung

Grundig

Grundig GSTB1701USB Bedienungsanleitung

Grundig

Grundig CINIO AVR 5200 DD GLO0150 Bedienungsanleitung

Grundig

Grundig DSR 1773 CY Bedienungsanleitung

Grundig

Grundig Satellit 500 Bedienungsanleitung

Grundig

Grundig GUFSAT02SD Bedienungsanleitung

Grundig

Grundig HIGH FIDELITY R 2000 Bedienungsanleitung

Grundig

Grundig STR 1300 Bedienungsanleitung

Grundig

Grundig STR 632 Bedienungsanleitung

Grundig

Grundig DTR 2000 S Bedienungsanleitung

Grundig

Grundig STR 611 Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung