H3C SecPath M9000-AI NSQM5MBSHA1 Bedienungsanleitung

Manual version: APW100-20190606 BOM: 3123A1T7

i

H3C SecPath M9000-AI NSQM5MBSHA1 interface

switch module

1 Identifier

The module identifier NSQM5MBSHA1 is in the upper right corner of the front panel.

2 About the module

The NSQM5MBSHA1 interface switch module is developed for H3C SecPath M9000-AI multiservice

security gateways. It provides two subcard slots. Working in conjunction with an M9000-AI interface

switch module, it meets 100G network requirements and can greatly enhance the security capability

of the device.

3 Specifications

Figure 1 Front panel

(1) Captive screw (2) Subcard slot 1

(3) Subcard slot 2 (4) Ejector lever

Table 1 Module specifications

Item Specifications

Dimensions (H × W × D) 50 × 432.6 × 521.3 mm (1.97 × 17.03 × 20.52 in)

SDRAM (DDR3) 2 GB

Power consumption 79 W to 89 W

Net weight 5.9 kg (13.01 lb)

Hot swapping Supported

Ambient temperature •Operating: 0°C to 45°C (32°F to 113°F)

•Storage: –40°C to +70°C (–40°F to +158°F)

Ambient humidity 5% RH to 95% RH, noncondensing

Compatible device models •M9000-AI-E8 multiservice security gateway

•M9000-AI-E16 multiservice security gateway

Compatible interface

modules

•NS-C300-CGQ2TG16A1

•NS-C300-QG4TG16A1

•NS-C300-TG24A1

•NS-C600-CGQ6A1

Manual version: APW100-20190606 BOM: 3123A1T7

ii

4 Installing or removing the module

4.1 Installing the module

1. Face the front panel of the device and remove the filler panel from the target slot.

2. Pivot the ejector levers down to the horizontal position, fully open the ejector levers, and then

gently push the module into the slot along the guide rails.

3. Pivot the ejector levers to the left until the module makes close contact with the backplane.

4. Use a Phillips screwdriver to fasten the captive screws on the module.

5. Close the ejector levers on the module.

Figure 2 Installing the module

4.2 Removing the module

1. Pivot the ejector levers down to the horizontal position.

2. Use a Phillips screwdriver to loosen the captive screws on the module until all pressure is

released.

3. Simultaneously open the ejector levers on the module to separate the module from the

backplane, and then pull the module slowly out of the slot along the guide rails.

4. Place the module on an anti-static workbench or put it in an anti-static bag.

5. If you are not to install a new module, install a filler panel in the slot to prevent dust and ensure

good ventilation.

Copyright © 2019 New H3C Technologies Co., Ltd.

The information in this document is subject to change without notice.

3

31

4

2

Andere H3C Steuereinheit Handbücher

H3C

H3C PSR650B-12A2-F Bedienungsanleitung

H3C

H3C PSR2400-54D Bedienungsanleitung

H3C

H3C PSR1600B-12A-B Bedienungsanleitung

H3C

H3C PSR750-A Bedienungsanleitung

H3C

H3C SR6600 SPE-FWM Bedienungsanleitung

H3C

H3C LSVM152SCFAN Bedienungsanleitung

H3C

H3C LSQ1LBSC0 Bedienungsanleitung

H3C

H3C LSXM1SEERBXD2 Bedienungsanleitung

H3C

H3C SIC-4G-CAT6 Bedienungsanleitung

H3C

H3C LSVM1S9800FAN Bedienungsanleitung

H3C

H3C SecPath M9000 NSQM1MBFEA0 Bedienungsanleitung

H3C

H3C PSR6000 Bedienungsanleitung

H3C

H3C S9500E Series Stücklistenhandbuch

H3C

H3C SecPath NSQ1FAB08D0 Bedienungsanleitung

H3C

H3C LSWM18CQ Bedienungsanleitung

H3C

H3C PSR3000-54A Bedienungsanleitung

H3C

H3C SecPath AC2500 Bedienungsanleitung

H3C

H3C SecPath M9000-AI NSQM5AIASKA1 Bedienungsanleitung

H3C

H3C PSR650C-12A Bedienungsanleitung

H3C

H3C LSWM116FC Bedienungsanleitung

H3C

H3C LSQM1SDNB0 Bedienungsanleitung

H3C

H3C SecBlade Bedienungsanleitung

H3C

H3C PSR250-12A1 Bedienungsanleitung

H3C

H3C LSVM2106SFAN Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung