H3C PSR3000-54A Bedienungsanleitung

H3C PSR3000-54A Power Module

User Manual

New H3C Technologies Co., Ltd.

http://www.h3c.com

Document version: 6PW102-20181116

and its licensors

No part of this manual may be reproduced or transmitted in any form

or by any means without prior written consent of New H3C

Technologies Co., Ltd.

Trademarks

Except for the trademarks of New H3C Technologies Co., Ltd., any

trademarks that may be mentioned in this document are the property

of their respective owners.

Notice

The information in this document is subject to change without notice.

All contents in this document, including statements, information, and

recommendations, are believed to be accurate, but they are

presented without warranty of any kind, express or implied. H3C shall

not be liable for technical or editorial errors or omissions contained

herein.

Environmental protection

This product has been designed to comply with the environmental

protection requirements. The storage, use, and disposal of this

product must meet the applicable national laws and regulations.

Documentation feedback

You can e-mail your comments about product documentation to

[email protected].

We appreciate your comments

Contents

Overview ·················································· 1

Front panel ···································································· 2

LEDs············································································ 2

Technical specifications ··················································· 4

Power module configuration·············································· 4

Installing and removing the power module······· 6

Installing the power module··············································· 6

Installing the power module ·········································· 6

Connecting the power cord··········································· 9

Removing a power module ··············································11

Removing the power cord············································12

Removing the power module········································12

Overview

The PSR3000-54A AC-input and DC-output power module is hot

swappable and provides a maximum output of 3000 W.

Table 1 PSR3000-54A power module features

Feature Description

Protection

Protection against input under-voltage, input

over-voltage, output over-voltage, output short

circuit, output under-current, output

over-current, and overheat.

Redundancy The power modules can operate in N+1 or N+N

redundancy. For more information, see "Power

module configuration."

Hot swapping You can install or remove a power module

when the device is operating.

The power module shuts down automatically when its temperature

exceeds the acceptable range. When the temperature returns to the

acceptable range, the power module automatically restarts.

Front panel

Figure 1 Front panel

(1) Power input LED (AC OK) (2) Handle

(3) AC input receptacle (4) Latch

(5) Power output LED (DC OK) (6) Air outlet vents

LEDs

Each PSR3000-54A power module has two LEDs.

Table 2 LED description

LED Mark Color Description

Power

input LED AC OK Off

No AC power input.

Low AC input voltage. The

power module has entered

protected state.

Green Normal AC input.

Power

output

LED

Green Normal DC output.

Red

DC output failure. An alarm

condition occurs, for

example, output short circuit,

output over-current, output

over-voltage, output

under-voltage, or remote

shutdown. The power

module has entered the

protected state.

Orange High temperature.

NOTE:

fte

the circuit breaker of the power module is switched off, the

LEDs on the power module will remain on for a while.

Technical specifications

Table 3 Technical specifications

Item Specifications

Rated input voltage 100 to 240 VAC @ 50 or 60 Hz

Rated output voltage 54 VDC

Maximum input current 16 A

Maximum output current 55.6 A

Maximum output power

•1200 W @ 110 VAC

•2400 W @ 175 to 200 VAC

•3000 W @ 220 VAC

Dimensions (H × W × D) 41 × 100 × 332 mm (1.61 × 3.94

× 13.07 in)

Ambient

temperature

Operating

temperature –10°C to +50°C (–14°F to

+122°F)

Storage

temperature –40°C to + 70°C (–40°F to

+158°F)

Power module configuration

Follow these guidelines to configure power modules for the device:

•Determine the total number of power modules based on the

actual power consumption, the power module slot number, and

power redundancy design.

•Determine the power module redundancy design based on the

power source conditions.

{When two mains power inputs are provided, you can

configure the power modules in N+N redundancy. N+N must

be not greater than the total number of power module slots.

{When one mains power input is provided, you can configure

the power modules in N+1 or N+N redundancy. N+1 or N+N

must be not greater than the total number of power module

slots.

•For easy usage and maintenance, configure a circuit breaker for

each power input. The rated current of the circuit breaker must

be a minimum of 20 A.

Installing and removing the power

module

Installing the power module

To avoid bodily injury and device damage, follow the procedures

in Figure 2 to install a power module.

Figure 2 Power module installation procedure

Before the installation, prepare an ESD wrist strap and a flat-blade

screwdriver yourself.

Installing the power module

1. Wear an ESD wrist strap, and make sure the strap makes good

skin contact and is correctly grounded.

2. Remove the blank panel from the target power module slot.

{If the blank panel is as shown in Figure 3, thread the

flat-blade screwdriver through the hole in the handle of the

blank panel and pull the blank panel out.

{If the blank panel is as shown in Figure 4, put your forefinger

in the hole in the blank panel and pull the blank panel out.

Skip this step if the target slot has no blank panel installed.

Figure 3 Removing a blank panel (1)

Andere Handbücher für PSR3000-54A

Inhaltsverzeichnis

Andere H3C Steuereinheit Handbücher

H3C

H3C PSR1600B-12A-B Bedienungsanleitung

H3C

H3C LSBM1WCM2A0 Bedienungsanleitung

H3C

H3C R6900-FAN Bedienungsanleitung

H3C

H3C SIC-4G-CAT6 Bedienungsanleitung

H3C

H3C LSVM2106SFAN Bedienungsanleitung

H3C

H3C SecPath M9000 NSQM1CGQ20 Bedienungsanleitung

H3C

H3C SecBlade Bedienungsanleitung

H3C

H3C SecPath PSR300-12A2 Bedienungsanleitung

H3C

H3C PSR450-12A Bedienungsanleitung

H3C

H3C PSR2400-54A Bedienungsanleitung

H3C

H3C Campus SeerEngine LSXM1SEERBXC2 Bedienungsanleitung

H3C

H3C SecPath PSR300-12A2 Bedienungsanleitung

H3C

H3C S9500 LSB1FW2A0 Stücklistenhandbuch

H3C

H3C SIC-4G-LTE-M Bedienungs- und Wartungsanleitung

H3C

H3C MSR Router Comware 5 Series Bedienungsanleitung

H3C

H3C LSQM1SDNB0 Bedienungsanleitung

H3C

H3C SecPath M9000 NSQM1MBFEA0 Bedienungsanleitung

H3C

H3C LSXM1SEERBXD2 Bedienungsanleitung

H3C

H3C LSVM1S9810FAN Bedienungsanleitung

H3C

H3C LSQ1LBSC0 Bedienungsanleitung

H3C

H3C PSR2400-54D Bedienungsanleitung

H3C

H3C NSQ1TGS32SF0 Bedienungsanleitung

H3C

H3C PSR650C-12A Bedienungsanleitung

H3C

H3C PSR1800-56A Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung