H3C LSBM1WCM2A0 Bedienungsanleitung
H3C LSBM1WCM2A0
Access Controller Module
Installation Manual
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Manual Version: T2-080414-20080620-C-1.02
Copyright © 2007-2008, Hangzhou H3C Technologies Co., Ltd. and its licensors
All Rights Reserved
No part of this manual may be reproduced or transmitted in any form or by any means
without prior written consent of Hangzhou H3C Technologies Co., Ltd.
Trademarks
H3C, , Aolynk, , H3Care,
, TOP G, , IRF, NetPilot,
Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware,
Storware, NQA, VVG, V2G, VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision and
HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd.
All other trademarks that may be mentioned in this manual are the property of their
respective owners.
Notice
The information in this document is subject to change without notice. Every effort has
been made in the preparation of this document to ensure accuracy of the contents, but
all statements, information, and recommendations in this document do not constitute
the warranty of any kind, express or implied.
Technical Support
customer_service@h3c.com
http://www.h3c.com
About This Manual
Organization
H3C LSBM1WCM2A0 Access Controller Module Installation Manual is organized as
follows:
Chapter Contents
1 Product Overview Introduces the features and appearance of the H3C
LSBM1WCM2A0 access controller module.
2 Preparing for
Installation
Introduces the installation environment of the H3C
LSBM1WCM2A0 access controller module, the
precautions before and during the installation, and the
tools required for the installation.
3 Installing the Access
Controller Module
Introduces the installation method for the H3C
LSBM1WCM2A0 access controller module, console
cable connection, Ethernet cable connection, and
checks after the installation.
4 Initial Startup of the
Access Controller Module
Introduces the startup and configuration of the H3C
LSBM1WCM2A0 access controller module, including
the establishment of a configuration environment,
connection of the console cable, setting of the terminal
parameters, and startup of the access controller
module.
5 Software Maintenance
Introduces the software maintenance for the H3C
LSBM1WCM2A0 access controller module, covering
the BootWare menus, software upgrade, and password
loss handling.
6 Troubleshooting Introduces problems that may occur during the startup
of the H3C LSBM1WCM2A0 access controller module
and the solutions to these problems.
Conventions
The manual uses the following conventions:
I. Command conventions
Convention Description
Boldface The keywords of a command line are in Boldface.
italic Command arguments are in italic.
Convention Description
[ ] Items (keywords or arguments) in square brackets [ ] are
optional.
{ x | y | ... }
Alternative items are grouped in braces and separated by
vertical bars. One is selected.
[ x | y | ... ]
Optional alternative items are grouped in square brackets
and separated by vertical bars. One or none is selected.
{ x | y | ... } *
Alternative items are grouped in braces and separated by
vertical bars. A minimum of one or a maximum of all can be
selected.
[ x | y | ... ] *
Optional alternative items are grouped in square brackets
and separated by vertical bars. Many or none can be
selected.
&<1-n> The argument(s) before the ampersand (&) sign can be
entered 1 to n times.
# A line starting with the # sign is comments.
II. GUI conventions
Convention Description
Boldface Window names, button names, field names, and menu
items are in Boldface. For example, the New User window
appears; click OK.
> Multi-level menus are separated by angle brackets. For
example, File > Create > Folder.
III. Symbols
Convention Description
Warning Means reader be extremely careful. Improper operation
may cause bodily injury.
Caution Means reader be careful. Improper operation may cause
data loss or damage to equipment.
Note Means a complementary description.
Related Documentation
In addition to this manual, each H3C Access Controllers documentation set includes
the following:
Manual Description
H3C WX Series Access
Controllers Operation
Manual
Provides a guide to the operation of H3C access
controllers. The set of manual covers command line
interface, VLAN, system maintenance and debugging,
wireless LAN, IPv4, IPv6, port basic configurations,
multicast protocols, 802.1x, AAA, SSH, ACL, QoS, and
description of the acronyms used throughout the
manual.
H3C WX Series Access
Controllers Command
Manual
Elaborates on the operation commands for H3C access
controllers. The set of manual covers the configuration
commands for VLAN, system maintenance and
debugging, WLAN, IPv4, IPv6, port basic
configurations, multicast protocols, 802.1x, AAA, SSH,
ACL, QoS, and a command index of the whole manual.
Obtaining Documentation
You can access the most up-to-date H3C product documentation on the World Wide
Web at this URL: http://www.h3c.com.
The following are the columns from which you can obtain different categories of product
documentation:
[Products & Solutions]: Provides information about products and technologies.
[Technical Support & Document > Technical Documents]: Provides several categories
of product documentation, such as installation and operation.
[Technical Support & Document > Product Support > Software]: Provides the
documentation released with the software version.
Documentation Feedback
We appreciate your comments.
Environmental Protection
This product has been designed to comply with the requirements on environmental
protection. For the proper storage, use and disposal of this product, national laws and
regulations must be observed.
Inhaltsverzeichnis
Andere H3C Steuereinheit Handbücher
H3C
H3C SecBlade Bedienungsanleitung
H3C
H3C SecPath M9000 NSQM1CGQ20 Bedienungsanleitung
H3C
H3C SIC-4G-CAT6 Bedienungsanleitung
H3C
H3C LSVM1S9810FAN Bedienungsanleitung
H3C
H3C LSQ1LBSC0 Bedienungsanleitung
H3C
H3C S9500 LSB1FW2A0 Stücklistenhandbuch
H3C
H3C SecPath NSQ1FAB08D0 Bedienungsanleitung
H3C
H3C S12500 LST1LB1A1 Bedienungsanleitung
H3C
H3C SecPath M9000-AI NSQM5MBSHA1 Bedienungsanleitung
H3C
H3C PSR650C-12A Bedienungsanleitung
H3C
H3C PSR450-12A Bedienungsanleitung
H3C
H3C PSR650B-12A2-F Bedienungsanleitung
H3C
H3C LSQM1CGS2QSA0 Bedienungsanleitung
H3C
H3C PSR360-56A Bedienungsanleitung
H3C
H3C SecPath AC2500 Bedienungsanleitung
H3C
H3C S9500 LSB1LB1A0 Bedienungsanleitung
H3C
H3C PSR1600B-12A-B Bedienungsanleitung
H3C
H3C PSR250-12A1 Bedienungsanleitung
H3C
H3C LSWM116FC Bedienungsanleitung
H3C
H3C SecPath DC2400 Bedienungsanleitung
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
