Haicom 601VT-OCK Bedienungsanleitung
+12V~24V in
1
1GND
2Vin 12~24V
3Alarm reset
4Alarm reset
5SOS switch
panic button
6SOS switch
panic button
7✕
8Burglar trigger (*)
9Remote Relay 1 (**)
10
Remote Relay 1 (**)
11
Remote Relay 2 (**)
12
Remote Relay 2 (**)
23 4 5 6
7 8
9
10
11 12
Tapping microphone GPS data output
HI-601VT car kit set up example
Vibration or
microwave sensor
** For oil or electricity cutting
* From in car alarm system
39
39
MAIN FEATURES — Optional car kits
*Support GSM, SMS full function multi-purpose tracking
*GPS real-time surveillance tracking
*Real-time in-car tapping
*All aspect protections by using GSM in dial up or SMS network
to inform the host globally
*Moving sensor real time inform when the car towed or
damaged
*Optional ultra-sound invasion sensor function
*Power cut off sensing system
*SOS panic button
*GPS speed set up inform when car moved
*In-car GPS navigation by smartphone, laptopPC, PDA
*Upgrade to the OEM fleet management system
Thank you choosing Haicom HI-601VT GPS/GSM tracker. To ensure the
device can be fully operated and all functions are applied correctly,
please make sure read the manual carefully. Most importantly, HI-
601VT tracker provides a solution for user a batter way to protect
his/her properties and we are not 100% guarantee the device can
function each time owing to all kinds of unexpected environment or
component failure. Please DO NOT use HI-601VT if the application
could cause life dangerous or injure.
Also, please ask professional technicians to install the HI-601VT car
kits only. The improper or wrong installation could cause the damage
of your vehicle especially, when the vehicle computerize getting more
and more popular and complicated. Haicom will not responsible the
damage for these improper installations.
41
41
When use and connect the HI-601VT device and the car kits,
the power source must directly come from the car battery.
When install the HI-601VT car kits, we strongly suggest that
the car kit CAN NOT take power between the in-car computers
or the wires controlled by the car key. Please use the dedicated
power wires and connect them to the car battery correctly and
directly. Connect between the in-car computer wiring could
cause the circuit damage or effect these devices functionalities.
There are more and more new car equipped with all kinds of
computers. Any wrong wiring could cause the computer fail.
Technician can not just take any power wires in car and do the
installation. The wires MUST connect directly from the battery.
Along with the optional car kit accessories, there is a 2 meters
power wire with one black and one red. First un-screw the
minus ( - ) screw on the battery and put the black wire on.
Then, screw it back. Then, un-screw the plus ( + ) screw on the
battery and put the red wire on. Then, screw it back.
Black
Red
42
42
HI-601VT-lite
IMPORTANT:
Please make sure the + - icons on the battery and only done by
professional electric technician. The plus ( + ) and minus ( - )
wiring has to be correct. Otherwise, the device will damaged by
the wrong wiring.
If you want to connect the wires with traditional way by using
the tape, do make sure solder the connection first. Then, tape
around it. The car moving and driving could cause the wire
disconnected after some time. Again, do not connect the power
to the HI-601VT car kit before complete the battery wiring.
If the car cigarette lighter still on even if the car key take out,
user can choose and buy the optional cigarette lighter as the
HI-601VT car kit power source. In this way, it is no need the
above complicated professional installation.
Beside wiring to the car main battery, user can also use the
optional cigarette lighter cables to supply the power to HI-601VT:
+12V~24V
Cigarette lighter directly
to HI-601VT
Cigarette lighter to HI-601VT
via car kit control box
5V
+12V~24V
12V in
43
43
DO NOT connect the plus ( + ) power wire
directly to the car kit. This action could cause
the HI-601VT and the car kit circuit damage
When install the devices, connect the power
wires to the car battery first and make sure the
connections are correct. Then, connect the wires
on the other end to HI-601VT and the car kit to
prevent any wrong doing and damages.
HI-601VT and the car kits are
not waterproof
DO NOT put the devices around
moist or humid environment if
there is no any waterproof
protection on them.
HI-601VT
Car kit data Cable
2 m
2.0mm
TO CAR ALARM SYSTEM
60 cm
60 cm
60 cm
60 cm
2 m
2 m
2 m
2 m
2 m
2 m
2 m
2 m
2 m
2 m
2 m
12~24V in
1
2
3
4
5
6
7
8
9
10
11
12
RELAY 1NO
RELAY 1NO
44
44
HI-601VT-lite
GPS receiver inside HI-601VT must “see” the sky
For some security reasons, user might hide HI-601VT
somewhere in car or in the bag. Please make sure no metal or
similar material above the HI-601VT main unit. In case of must
put the HI-601VT
under certain metal material (like car trunk or
under passenger seat, etc.), please use the GPS
(MMCX type) external antenna to get better
satellite signal (in this case, the GPS external
antenna must see the sky. The
GPS receiver must get 3D fixed
so that HI-601VT able to transmit
back the current exact location to
the host.
GPS antenna
MMCX antenna plug
45
45
HI-601VT all aspect multi-function
HI-601VT provides optional anti-thief and alert system to
inform the host in real time. User can handle the problem when
the situation happened.
The purpose of the vibration moving sensor is to sense the
external abnormal movements: Such as, the car gets external
impact (the moving sensor sensitivity is adjustable depend on
the car weight or how
sensitive that user need)
or get towed or moving.
The moving sensor system
will react and inform to the
host by phone call or SMS
message.
The purpose of the microwave sensing system is to detect if
there is any intrusion into the car. The microwave sensing
system can detect the status changes, such as, car windows
smashed or some people get in the car (the microwave field
Adjust the
sensibility
Vibration sensor
46
46
HI-601VT-lite
will changed when the above
intrusion happen).
The microwave will react
and inform the host by
phone call or SMS
message (the message
will show “ALARM”) When
the sensor not sensing
any abnormal situation
in 10 minutes, the systems
will enter into alert status.
When someone cut off the HI-601VT main power, the battery
inside HI-601VT will become back up power supply and keep
supply power to HI-601VT for around 20 hours. When the
above situation happen, HI-601VT will react and inform the
host by phone call or SMS message (the message will show
“POWER”)
When receive the above alert call back, user can tell and deal
the situation. Then, press ✳to disable the alert.
User can set up to 3 sets of dial back telephone numbers.
Please refer to the advance settings section on this manual for
set up these telephone numbers.
Adjust the
sensibility
Microwave sensor
47
47
In-car tapping function
When anti-thief function enabled, HI-601VT will call to the pre-set
telephone numbers to inform the host. Beside, at any time, any where,
the host can dial the telephone number inside HI-601VT and press 8to
hear the sound (or someone talking) inside the car and press ✳to
back to normal status (the system will also automatically back to
normal status after 15 minutes tapping)
The tapping function provides the host to ensure the real situation
inside the car and verify
whether it is false alarm or
not. Since the tapping is
executed in car and the
microphone sensitivity is
good, user can hide in
preferred location in car.
Or, near the windshield or
in front of driver side are
recommended.
Remotely oil cutting function
When the car stolen, host can use any phone with you and dial 40 to
immediately execute the oil cutting and force the thief give up the
stolen. After control the situation, host can dial 4✳to let the oil supply
back to normal.
Microphone
48
48
HI-601VT-lite
SOS emergency for help
When the car kits installed inside the car, host can wire the panic
button secretly and only the host know where the button is. When host
got hijack, host can push the panic button and HI-601VT will
immediately dial back the pre-set 3 sets telephone numbers
sequentially to some others who
have the other two phones. In case
the 3 phone calls fail or no one pick
up, HI-601VT will then, send the
SMS message to these phones.
The SMS message will look like this:
* HC-V.3.5*SOS*V,N, 23”51' 15.6, E, 120” 41' 09.6, 020.3, 358.2*
Example and explanations:
Latitude Longitude Speed (sea mile) Direction (360)
* HC-V.3.5*SOS*V,N, 23”51' 15.6, E, 120” 41' 09.6, 020.3, 358.2*
V = GPS last location
A = GPS current location
SOS = SOS button triggered
ALARM = in-car alarm triggered
Firmware version SENSOR = motion sensor initiated
The SOS means it is an emergency for help and the coordinates
in behind is the location where the object are.
SOS Button
49
49
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Haicom GPS Handbücher
Haicom
Haicom HI-203E Bedienungsanleitung
Haicom
Haicom HI-601VT Bedienungsanleitung
Haicom
Haicom HI-303 MMF Bedienungsanleitung
Haicom
Haicom HI-505SD Bedienungsanleitung
Haicom
Haicom HI-602X Produktinformationsblatt
Haicom
Haicom HI-204E Bedienungsanleitung
Haicom
Haicom HI-407BT Bedienungsanleitung
Haicom
Haicom HI-203E Montageanleitung
Haicom
Haicom HI-605X Produktinformationsblatt
Haicom
Haicom HI-406BT Bedienungsanleitung
Haicom
Haicom REAL-TIME TRACKER HI-602 Bedienungsanleitung
Haicom
Haicom REAL-TIME TRACKER HI-602 Bedienungsanleitung
Haicom
Haicom HI-604 Bedienungsanleitung
Haicom
Haicom HI-204III Bedienungsanleitung
Haicom
Haicom HI-305N Bedienungsanleitung
Haicom
Haicom HI-403 Bedienungsanleitung
Haicom
Haicom HI-204III Bedienungsanleitung
Haicom
Haicom HI-406BT-C Bedienungsanleitung
Haicom
Haicom HI-603 Bedienungsanleitung
Haicom
Haicom HI-601VT Bedienungsanleitung
