Haicom HI-203E Montageanleitung

HI-203E

GPS Receiver

HI-203E

GPS Receiver

General description of what GPS

is and how it works.

GPS (Global Positioning System) is the only system today able to show

you your exact position on the Earth anytime, in any weather, anywhere.

GPS satellites, 24 in all, orbit at 11,000 nautical miles above the Earth.

They are continuously monitored by ground stations located worldwide.

The satellites transmit signals that can be detected by anyone with a

GPS receiver. Using the receiver, you can determine your location with

great precision.

The satellites are positioned so that we can receive signals from six of

them nearly 100 percent of the time at any point on Earth. You need that

many signals to get the best position information. Satellites are equipped

with very precise clocks that keep accurate time to within three

nanoseconds- that's 0.000000003, or three billionths of a second. This

precision timing is important because the receiver must determine

exactly how long it take s for signals to travel from each GPS satellite.

The receiver uses this information to calculate its position.

Although GPS was designed for military use, many thousands of civi

lians make use of it. The satellites actually broadcast two signals, one is

only formilitary use, and one can be used by both military and civilians.

Since GPS is passive (you only need to receive the signal), there are no

restrictions on who can use the signal available to civilians.

GPS technology can be used in avariety of fields besides providing

navigation for vehicles on the sea, in the air and on the ground. GPS

applications also include keeping track of where afleet of trucks, trains,

ships or planes are and how fast they are moving; directin gemergency

vehicles to the scene of an accident; mapping where a city's assets are

located ; and providing precise timing for endeavors that require large-

scale coordination.

PS/2Connector

Color Function CN1

Green TX 5

White RX 4

Red VCC 2

Black GND 1

135

246

1800±30mm

GLOBAL POSITIONING SYSTEM

HI-203E GPS RECEIVER

Pin Assignment

Connectors

Pocket PC

HI-203E PS/II GPS receiver Can Connecting to a female PS/II

Connector. One end from the female Connector is

+12V car charger (charging PDA and GPS

receiver simultaneously) the other end form

the female PS/II connector is the PDA

connector for connecting your PDA.

For notebook PC use:

HI-203E PS/II can also connect

with a PS/II to DB9 PS-232 serial

cable or USB connector.

Min Din: 6 pin male

connector

Wire: 3.6 ± 0.1mm

HI-203E is a GPS receiver with PS/II mini-DIN

interfaces and built-in active antenna for high

sensitivity to tracking signal. HI-203E is well suited

to system integration and users who use any kinds of

mobile devices, such as, PDA, notebook PC, Tablet PC, etc.

It satisfies a wide variety of applications for car navigation,

personal navigation or touring devices, tracking and marine

navigation purpose. Users can simply plug it into a PDA or

other type of handheld PC running with suitable mapping

and routing software for navigation.

1.1 Standard Package

Before you start up, make sure that your package includes

the following items. If any items are missing or damaged,

contact your dealer immediately.

• HI-203E GPS Receiver unit

• Suction CUP

• User Manual CD (including

User Manual, HaiTest Testing

Program

Optional Accessories:

• PS/II to PDA connector

and car charger

• PS/II to DB9

adapting cable

• PS/II to USB

adapting cable

1. HI-203E Series Introductions1. HI-203E Series Introductions

HI-203E-XXXX

(Pocket PC Plug)

HI-203E-DB9

HI-203E-USB

SECTION 1

INTRODUCTION

1.1 OVERVIEW

The HI-203E GPS Receiver is intended for use in a wide range of

applications. The receiver simultaneously tracks up to twelve satellites,

provides accurate satellite positioning data with fast time-to-first-fix

(TTFF) and low power consumption. It is designed for high performance

and maximum flexibility in a wide range of applications including mobile

asset tracking, in-vehicle automotive guidance, location sensing,

telematics and so on. The highly integrated receiver achieves high

performance, minimizes board size and power consumption

requirements. The HI-203E is designed to withstand harsh operating

environments; however, it should be used inside an enclosure as a part

of the application product designed by the system integrator.

1.2 FEATURES

The HI-203E GPS receiver offers following features:

•T welve parallel tracking channels

•F ast TTFF and low power consumption

•Compact design suitab le for applications requiring small space

•On-board rechargeab le battery sustained real-time clock and memory

for fast satellite acquisition during power-up

•High accur acy one-pulse-per-second output

•Suppor ts NMEA-0183 protocol

•Full na vigation accuracy achievable with Standard Positioning Service

•Optimiz ed for navigation in urban-canyon environments

•A utomatic cold start with no user initialization required

SECTION 2

RECEIVER OPERATION

Upon power up, after initial self-test has completed, the HI-203E will begin

satellite acquisition and tracking process. Under normal open-sky condition,

position-fix can be achieved within approximately 45 seconds (within 15

seconds if valid ephemeris data is already collected from recent use). After

receiver position has been calculated, valid position, velocity and time

information are transmitted through the on board serial interface.

The receiver uses the latest stored position, satellite data, and current

RTC time to achieve rapid GPS signal acquisition and fast TTFF. If the

receiver is transported over a large distance across the globe, cold-start

automatic-locate sequence is invoked. The first position fix may take up

to five minutes searching the sky for the GPS signal. The acquisition

performance can be improved significantly if the host initializes the

receiver with a rough estimate of time and user position.

As soon as GPS signal is acquired and tracked, the HI-203E will

transmit valid navigation information through its serial interface. The

navigation data contains following information:

• Receiver position in latitude, longitude, and altitude

• Receiver velocity

• Time

• DOP error-magnification factor

• GPS signal tracking status

The HI-203E will perform 3D navigation when four or more satellites are

tracked. When three or fewer satellites are tracked, altitude-hold is enabled

using the last computed altitude and 2D navigation mode is entered.

With signal blockage or rising and setting of the satellites, where a

change in satellite constellation used for position fix occurred, large

position error may result. The HI-203E incorporates a proprietary

algorithm to compensate the effect of satellite constellation change, and

maintains an accurate smooth estimate of the receiver position, velocity,

and heading.

2.1 RECEIVER SPECIFICATIONS

FEATURES

General

Sensitivity

Update Rate

Accuracy

Acquisition

Reacquisition

Dynamics

Operation Temperature

Storage Temperature

Operating Humidity

Primary Power

Current Consumption

Serial Interface

Protocol

Datum

Antenna

NMEA Message

Dimension

2.2 LED INDICATOR

LED off

LED flashing

LED on

DESCRIPTIONS

L1 frequency, C/A code, 12-channel

-165 dBW minimum

1Hz

Position: 25m CEP without S/A

Velocity : 0.1/sec without S/A

Cold start: < 150sec (typical)

Warm start: < 45sec (typical)

Hot start: < 15sec

<100msec

Altitude: -1000m to 18000m

Velocity: 500m/sec

Acceleration: g

-20°C to +75°C

-55°C to +90°C

5% to 95%

+3.8V ~ 8V DC

125mA @ 3.3V

RS-232

4800/9600 baud, 8-None-1

NMEA-0183 v2.20 @ 4800/9600 baud, 8-None-1

219 standard datum, default WGS-84

On-Board Patch Antenna

GGA, GLL, GSA, GSV, RMC, and VTG

41mm x 58mm x 20mm (W x L x H)

Receiver Switch Off

Signal Searching

3D Position Fixed

SECTION 3

HARDWARE INTERFACE

3.1 MECHANICAL DIMENSIONS

    Unit:mm

Top View

Lateral View

Bottom View

41±0.2

20±0.2

41±0.2

58±0.2

I/O Cable

LED indicator

CPU

3.2 RF MODULE HARDWARE INTERFACE

RFIC

3

4

5

6

7

Description

Vcc Input :3.3V

CTRL :Input signal for RF module power-saving control

GND : Power and signal ground

REF Out : 16.367MHz reference output

GND : Power and signal ground

IF Out :4.092MHz IF signal output

Andere Handbücher für HI-203E

Inhaltsverzeichnis

Andere Haicom GPS Handbücher

Haicom

Haicom HI-305N Bedienungsanleitung

Haicom

Haicom HI-405BT Bedienungsanleitung

Haicom

Haicom HI-603 Bedienungsanleitung

Haicom

Haicom HI-303E Bedienungsanleitung

Haicom

Haicom HI-403 Bedienungsanleitung

Haicom

Haicom HI-605X Produktinformationsblatt

Haicom

Haicom HI-203E Bedienungsanleitung

Haicom

Haicom HI-303III Bedienungsanleitung

Haicom

Haicom HI-204III Bedienungsanleitung

Haicom

Haicom REAL-TIME TRACKER HI-602 Bedienungsanleitung

Haicom

Haicom HI-407BT Bedienungsanleitung

Haicom

Haicom HI-303 MMF Bedienungsanleitung

Haicom

Haicom HI-601VT Bedienungsanleitung

Haicom

Haicom HI-601VT Bedienungsanleitung

Haicom

Haicom HI-505SD Bedienungsanleitung

Haicom

Haicom HI-601VT Bedienungsanleitung

Haicom

Haicom HI-604 Bedienungsanleitung

Haicom

Haicom HI-604X Bedienungsanleitung

Haicom

Haicom HI-406BT-C Bedienungsanleitung

Haicom

Haicom HI-305III Bedienungsanleitung

Haicom

Haicom HI-204E Bedienungsanleitung

Haicom

Haicom HI-602X Produktinformationsblatt

Haicom

Haicom REAL-TIME TRACKER HI-602 Bedienungsanleitung

Haicom

Haicom HI-406BT Bedienungsanleitung

Beliebte GPS Handbücher anderer Marken

Raven

Raven Cruizer II Handbuch

Hama

Hama 53118 Bedienungsanleitung

Garmin

Garmin SOUNDER 125 Bedienungsanleitung

Garmin

Garmin DEZL 580 Bedienungsanleitung

Jigabot

Jigabot EX Bedienungsanleitung

Pointer

Pointer Cellocator CelloTrack XT LTE Installationsanleitung

Queclink

Queclink GV55LITE Bedienungsanleitung

Voxson

Voxson Voxtrack GPS500 Gebrauchsanweisung

Garmin

Garmin ECHOMAP PLUS Bedienungsanleitung

Starcom Systems

Starcom Systems Kylos Compact Bedienungsanleitung

Garmin

Garmin 15 H Series Bedienungsanleitung

Cobra

Cobra Marine MC 600Ci Bedienungsanleitung

Cellocator

Cellocator CelloTrack T Bedienungsanleitung

Enfora

Enfora Mini-MT GSM2228UG001 Bedienungsanleitung

Magellan

Magellan eXplorist 100 Bedienungsanleitung

LTE

LTE G50B Bedienungsanleitung

Garmin

Garmin DEZL OTR500 Bedienungsanleitung

SkyGolf

SkyGolf SkyCaddie SG1 Bedienungsanleitung