Hanil Micro 12 Bedienungsanleitung

OperatingManual

Serial No.

Micro

Centrifuge

Purchase Date

Place of purchase

Micro 12

www.ihanil.com

2/20

Scientific

Inc.

All

rights

reserved.

Ifyouhaveanyquestions,contactHanil ScientificInc.orplace of purchase.

[email protected] / [email protected]

[email protected] / [email protected] 3

CONTENTS

2.Productdescription --------------------------6

2.1 Appearance -6

3 .

Installation -------------------------------------8

3.2 Installation -8

Operation

--------------------------------------12

4.1 Controller

-12

4.2

Setting RPM

-13

4.3

Setting run time -13

4.4

Starting/End the centrifugaion -13

4.5

Pulse function -13

Maintenance----------------------------------14

6.Troubleshooting---------------------------15

Rotor

and

accessories ----------------------17

3.1

Packing

inspection -8

3.3

Connect

power -9

1. General Considerations -----------------------4

1.1 Safety -4

1.2Transport & Storage -4

1.3Safety labe -5

1.4Electric safety information -5

2.2 Delivery package -6

2.3 Specifications -7

3.4 Opening/closing the lid -9

3.5Loading and removal of the rotor -10

3.6Loading tubes -11

5.1Careinstructions-14

5.2Cleaning-14

6-1Possibleproblems-15,16

4 www.ihanil.com

1. General Considerations

1. The centrifuge shouldbeinstalled on flatsurface tomaintainlevel.

2. Check the voltage tobeused,before connecting thecentrifuge to thepower source.

4.Donot exceed themaximumrated speedof therotor orbuckets oraccessories inuse.

6. If the centrifuge is contaminated by toxic or radioactive samples or infectious blood samples, remove contaminants

completely

7. Substances that may generate volatile or explosive vapor can not be centrifuged.

8. The balancing workof samples shoudbe done inadvancebefore operation.

11.Only centrifuge withrotor androtorlid firmly tightened.

12.Donotblock vents.

not

insert

foreign

objects

into

the

holes

the

device.

14. Repairs must be carried out by a technologist authorized by Hanil scientific Inc.

15.According to IEC61010-2-020 maintain a 30cm“clearance envelope”around the centrifuge while the rotor is spinning.

16.

Please

contact

the

place

purchase

Hanil

Scientific

Inc.(techsupport@ihanil.com/info@ihanil.com)

for

product

repairs.

1.2 Transport &Storage

1.1 Safety

Ambient temperature 5℃~35℃

Maximum relativehumidity 30% ~ 85%

Airpressure 500 ~1060hpa

Followprecautions and all the safetyrequirements described on thisuser manual to prevent any

damages and failure of equipment and loss of lives.

Abnormal vibration iscaused when the device isinstalled onan inclined surface.

3.Onlyuserotors,parts, andaccessoriesprovidedby

Hanil

Scientific

Inc.

Hanil

Scientific

Inc.

not

responsible

for

damages

the

device

and

accidents

caused

using

parts

and

accessories

not

recommended.

5. Make sure to prepare necessary safety measures before using samples that are toxic or radioactive samples or pathogenic

or samples or infectious blood.

and take needful actions such as ventilation or isolation of centrifuge.

9. Before operation, rotor and chamber should be dry.

10.Donotattempt toslow or stop thespinningrotor byhand.

13.

Storage Transport

Ambient temperature -10℃~ 40℃

Maximumrelativehumidity 10% ~ 90%

Airpressure 500 ~1060hpa

[email protected] / [email protected]

1. General Considerations

1.3 Safety label attached to products

1.4 Electric safety information

Electric shock

1. Use a power cord only provided with the device.

2. Use sockets with a protective earth conductor and suitable power cord.

3. Do not use an extension cord.

4. Do not place anything on the power cable

5. Do not block vents.

6. If you have the following emergencies, shut off the power supply and unplug the power cord from outlet

and

Do not open lid until rotor stops completely.

Rotation direction of the rotor.

contact

your

place

purchase or Hani lScientific Inc.

-Unusualnoisesorsmellfrom theequipment.

-Damageor wearof apowercord.

-Breakdownof circuitbreaker, fuseorsafetydevice.

-If you spillliquidon the equipment.

-If theequipmentisexposedtowater.

-If Someofequipmenthasbeendamaged.

6 www.ihanil.com

2. Product description

2.1 Appearance

① Lid : Lidprotects theinside ofthe chamber.

②

Rotor

locking

screw:

Connect

the

rotor

the

motor

shaft.

③

Rotor:

Connected

the

motor

shaft

for

centrifugal

separation

④Lid

sensor

Detect

whether

lid

cloesd

⑤

Lid

open

switch:Press

the

button

open

the

lid.

⑥Controller

Keys

and

knobs

for

operating

the

centrifuge.

⑦Power

socket

Connection

for

power

cord.

⑧Power

switch

Switch

for

switching

the

centrifuge

on/off.

⑨Absorbent

rubber

Fix

the

device

the

laboratory

bench.

①Standard

offering

-Micro12main

body

(Rotor

included

A2.0-12)

- Power

cable

(300/500V,

6A)

-User

manual

②Optionalproducts[see7.Rotor and accessories]

PCR

strip

rotor

(A0.2-32)

①

②

⑥

⑤ ⑦

⑧

⑨

③

④

2.2 Delivery package

info@ihanil.com/techsupport@ihanil.com 7

2. Product description

2.3 Specifcations

*RPM, RCF value is for A2.0-12.

* Thisdevice doesnotprovide automaticrecognition of therotor.

So donot exceed 6,000rpm when using thePCRrotor.

Max. RPM 13,500 rpm

Max. RCF 12,032 xg

Time ≤ 15 min, Pulse

Acc. time to max. speed ≤18 sec

Dec. time from max. speed ≤8 sec

Tube Capacity 1.5/2.0ml x 12

Power supply AC110/220V, 50/60Hz

Dimension (W x D x H, mm) 190 x 202 x 129

Weight (kg) 1.5

※ RCF Table

* Rcf value was calculated based on the bottom of the rotor hole.

RPM

A2.0-12

RPM

A0.2-32

0.2ml 0.5ml 1.5/2.0ml 0.2 ml

Inner line

0.2 ml

Outer line

3,000 443 545 594 3,000 313 ~ 443 464 ~ 560

6,000 1,231 1,515 1,651 5,000 870 ~ 1,231 1,289 ~ 1,556

8,000 3,151 3,877 4,226

6,000

[ Max.]

1,253 ~ 1,773

1,857 ~ 2,241

10,000 4,924 6,058 6,603

12,000 7,090 8,724 9,508

13,500 8,973 11,042 12,032

8 www.ihanil.com

3. Installation

3.1 Packinginspection

3.2 Installation

▶Checkthedelivery forcompleteness.

·Checkpackingconditions verycarefullybeforeunpacking.

·ContactHanilScientificimmediatelyifdamagesfound.

·Checkthedelivery forcompleteness.

·Youcan getcontactdetails onpackingbox orback of themanual.

▶Check all parts for damage.

Installationonhardand flatground.

•Centrifugeshouldbeinstalledonhardand flatplace.

•If thecentrifugeisinstalledinaninclinedplace, theshaftmaybebentdue

to theweightof therotor.

Goodventailation.

•Foraircirculationandsafety,maintaina30cm“clearanceenvelope”around

thecentrifugewhile therotorisspinning.

Constanttemperature/humidity

•Centrifugeequippedwith thesensitiveelectronicsoftware whichis fragile

withhumidityand temperature.

•Mustavoiddirectrayorheater andbeput in theambienceofcontrolled

temp.andair.

Avoidthecorrosivegas

•Install thecentrifugeinaplace wherecorrosivegasisnot generated.

•Sulfurdioxidegasandchlorinegasmaycausecorrosion.

Leveling

• Theshaft shouldbeputexactly verticalon thehotizontaliy flat groundby

theleveling tool.

3. Installation

3.3 Connectpower

3.4 Opening/Closing the lid

·Connect thedevice to voltagesourceswhichcorrespond to theelectricalrequirementson

When closing the lid, close it completely until it clicks.

(O) (X)

· Use sockets with a protective earth conductor and provided power cord.

the label attached to the device.

1. Connectthepower cable tothepower socketon therightside of theproduct andplug thecord

into theoutlet.

2. Switch thecentrifugeonusing thepower switchon theright sideof the device.

▶It is normal product to hear a beep when power is connected.

thelid-

1. Press the 'lid open' switch.

-Opening-Closing thelid-

1.Put thelid onandpress theedge of thelid

If thelidisnot completelyclosed, thedevicewillnotoperate.

info@ihanil.com/techsupport@ihanil.com 9

10 www.ihanil.com

3. Installation

3.5 Loading and removal of the rotor

Motor Hub

(Motor Shaft)

· This device is equipped with a rotor .

· Only use rotors, parts, and accessories provided by HanilScientific Inc .

· Do not use a defective rotor .

Using

flat

head

screwdriver,

turn

the

rotor

locking

screw

counterclockwise

and

pull

completely

out

with

the

washer

under

the

screw.

Lift

the

rotor

from

the

motor

shaft .

3.Load

the

rotor

into

the

motor

shaft .

Align

the

washer

with

the

hole

the

top

the

rotor .

Insert

the

rotor

lock

screw

into

the

screw

hole

the

center

the

rotor

and

turn

clockwise

using

flat

head

screwdriver

completely

lock

Check

that

the

rotor

completely

locked .

Flat head screwdriver

Rotor lock screw

Washer

Rotor

Follow the steps below to remove or replace the rotor.

Inhaltsverzeichnis

Andere Hanil Laborausrüstung Handbücher

Hanil

Hanil Fleta 5 Bedienungsanleitung

Hanil

Hanil Ultra 5.0 Bedienungsanleitung

Hanil

Hanil Cellspin II Bedienungsanleitung

Hanil

Hanil Smart 15 Plus Bedienungsanleitung

Hanil

Hanil FLETA 4 Bedienungsanleitung

Hanil

Hanil HyperVAC HVC-2124 Bedienungsanleitung

Hanil

Hanil J1250 Bedienungsanleitung

Hanil

Hanil Smart R17 Bedienungsanleitung

Hanil

Hanil T04 Bedienungsanleitung

Hanil

Hanil Ultra 5.0 Bedienungsanleitung

Hanil

Hanil M15R Bedienungsanleitung

Hanil

Hanil T05R Bedienungsanleitung

Hanil

Hanil Supra R30 Bedienungsanleitung

Hanil

Hanil Supra R17 Bedienungsanleitung

Hanil

Hanil J1250 Bedienungsanleitung

Hanil

Hanil T05R Bedienungsanleitung

Hanil

Hanil SeroSpin II Bedienungsanleitung

Hanil

Hanil Smart 15 Plus Bedienungsanleitung

Hanil

Hanil T04B Bedienungsanleitung

Hanil

Hanil FLETA 4 Bedienungsanleitung

Hanil

Hanil T04 Bedienungsanleitung

Hanil

Hanil Fleta5 Bedienungsanleitung

Hanil

Hanil Supra R30 Bedienungsanleitung

Hanil

Hanil ARA Smart 6 Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung