Harbor Breeze MARICOPA LP8013LAZ Bedienungsanleitung

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-888-567-2055, 8 a.m. - 5 p.m., EST, Monday - Friday.

Español p. 23

ITEM #0196508

MODEL #LP8013LAZ

MARICOPA

CEILING FAN

Harbor Breeze® is a registered trademark

ATTACH YOUR RECEIPT HERE

Serial Number Purchase Date

TABLE OF CONTENTS

Safety Information ...................................................................................................................

Package Contents ...................................................................................................................

Hardware Contents ...................................................................................................................

Preparation ..............................................................................................................................

Assembly Instructions .............................................................................................................

Fan Alignment and Hanger Bracket Installations ....................................................................

Hanging Instructions ...............................................................................................................

Wiring Instructions ...................................................................................................................

Canopy Housing Installation ...................................................................................................

Blade Installation ....................................................................................................................

Housing Switch Cup/Adapter Assembly Installation .............................................................

Wall Control Wiring Instructions .............................................................................................

Wall Control Operating Instructions ........................................................................................

Blade Balancing Installation Instructions ......................................................................................

Care and Maintenance .................................................................................................................

Troubleshooting .......................................................................................................................

Warranty ...................................................................................................................................

Replacement Parts List .............................................................................................................

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install

the product. If you have any questions regarding the product, please call customer service at

1-888-567-2055, 8 a.m. - 5 p.m., EST, Monday - Friday.

• Before you begin installing the fan, disconnect the power by removing fuses or turning off circuit

breakers.

• Make sure that all electrical connections comply with local codes, ordinances, or the National

Electrical code. Hire a qualified electrician or consult a do-it-yourself wiring hand-book if you are

unfamiliar with installing electrical wiring.

•Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades

to the floor and at least 30 in. from the ends of the blades to any obstruction.

•If you are mounting the fan to a ceiling outlet box, use a METAL octagonal outlet box.

Secure the box directly to the building structure. The outlet box and its support must be able to

support the moving weight of the fan (at least 35 lbs.) Do NOT use a plastic outlet box.

• After you install the fan, make sure that all connections are secure to prevent the fan from falling.

• Instructions for supply connections: conductor of a fan identified as grounded conductor to be

connected to a grounded conductor of power supply; conductor of a fan identified for equipment

grounding to be connected to an equipment-grounding conductor.

Do not install or use fan if any part is damaged or missing.

WARNING

Read all instructions and safety information before installing your new fan.

Review accompanying assembly diagrams.

CAUTION

To reduce the risk of fire, electrical shock, or personal injury, wire connectors provided

with this fan are designed to accept only one 12 gauge house wire and two lead wires

from the fan. If your house wire is larger than 12 gauge or there is more than one house

wire to connect to the two fan lead wires, consult an electrician for the proper size wire

connectors to use.

WARNING

To reduce the risk of fire, electric shock, or personal injury, do not bend the blade arms

when installing them, balancing the blades, or cleaning the fan. Do not insert foreign

objects between the rotating fan blades. Mount to outlet box marked “ACCEPTABLE

FOR FAN SUPPORT” and use mounting screws provided with the outlet box. Most outlet

boxes commonly used for the support of lighting fixtures are not acceptable for fan sup-

port and may need to be replaced. Consult a qualified electrician if in doubt.

WARNING

SAFETY INFORMATION (Continued)

•The net weight of this fan is: 36.6 lbs. (16.6 kg).

This fan is to be used in dry or damp locations only.

WARNING

PACKAGE CONTENTS

B C D E

F G H I

MED

OFF

YTITNAUQNOITPIRCSEDTRAP

A Motor Arm Assembly 1

Switch Cup Assembly

21tekcarBregnaHC

Downrod/Hanger Ball

Assembly

Ceiling Canopy

Canopy Screw Cover

Blade Holder Arm 6

Blade

3-Speed Wall Control

T-Handle Wrench

Wire

Connectors

Qty. 4

Before beginning assembly of product, make sure all parts are present. Compare parts with.

package contents list and diagram above. If any part is missing or damaged, do not attempt to

assemble the product. Contact customer service for replacement parts.

Estimated Assembly Time: 60 minutes

Tools Required for Assembly (not included): Phillips screwdriver, 1/4 in. flathead screwdriver,

wire stripper and step ladder.

Helpful Tools (not included): AC tester light, do-it-yourself wiring handbook and wire cutters.

PREPARATION

HARDWARE CONTENTS (shown actual size)

Balance

Kit

(not shown

to size)

Qty. 1

Fiber

Washers

Qty. 19

CC DD

Nylon

Locking Nut

Qty. 1

Short

Lag Bolt

Qty. 1

Socket-Head

Cap Screw

Qty. 1

Screws

Qty. 13

Washer-Head

Screws

Qty. 19

Long

Lag Bolt

Qty. 1

Steel Washer

Qty. 2

Ceiling

Support Cable

(Not shown

to size)

Qty. 1

Ceiling

Support Cable

Clamp with Screw

Qty. 1

ASSEMBLY INSTRUCTIONS

1. Remove the hanger ball portion from the

downrod/hanger ball assembly (D) by loosen-

ing the set screw in the hanger ball until the

ball falls freely down the downrod. Remove the

pin from the downrod, then remove the hanger

ball. Retain the pin and hanger ball for

reinstallation in Step 4. (Fig. 1)

2. Slightly loosen the two center support

housing screws on motor arm assembly (A)

with T-handle wrench (J) as shown. (Fig. 2)

ASSEMBLY INSTRUCTIONS (Continued)

4. Route wires and support cable through canopy

screw cover (F) and canopy (E) and position

them on the downrod. (Fig. 4)

Hardware Used

DD x 1

Nylon Lock

Nut

FF x 1

Socket

Head

Cap Screw

3. Route the black, white and blue wires through

the downrod. Push the downrod into top of

center support housing of the motor arm

assembly (A) until the downrod makes contact

with the stop feature. Align holes in downrod

with holes in support housing. Using the

T-handle wrench (J), secure downrod to fan

assembly with socket head cap screw (FF)

and nylon lock nut (DD). NOTE: MAKE SURE

SCREW PASSES THROUGH HOLES IN

DOWNROD BY PULLING UP ON THE

DOWNROD PRIOR TO FULLY TIGHTENING

THE CAP SCREW. Fully tighten all three

screws preassembled on the support housing

of the motor arm assembly (A). (Fig. 3)

ASSEMBLY INSTRUCTIONS (Continued)

FAN ALIGNMENT AND HANGER BRACKET INSTALLATION

WARNING

To avoid possible electrical shock, be

sure electicity is turned off at the main

fuse box before hanging.

NOTE: If you are not sure if the outlet box is

grounded, contact a licensed electrician for

advice, as it must be grounded for safe operaion.

5. Reinstall the hanger ball on the downrod as

follows. Route the three 54 in. wires through

the hanger ball. Position the pin through

the two holes in the downrod and align the

hanger ball so the pin is captured in the

groove in the top of the hanger ball. Pull the

hanger ball up tight against the pin. Securely

tighten the set screw in the hanger ball.

(Fig. 5)

CAUTION

A loose set screw could result in a wobbly

fan.

6. Cut off excess lead wire approximately 6 to 9

in. above top of the top of the downrod. Strip

insulation off 1/2 in. from the end of each lead

wire. (Fig. 6)

9in

FAN ALIGNMENT AND HANGER BRACKET INSTALLATION (Continued)

2. To begin mounting the hanger bracket (C), drill

a 1/4 in. pilot hole through the center of the

junction box, into the ceiling joist or structural

member, independent of the junction box.

Loosely attach the hanger bracket (C) to the

ceiling structure using the long lag bolt (HH)

and flat washer (EE). Do not fully tighten the

long lag bolt (HH) yet. Hanger bracket (C)

should be free to rotate. (Fig. 2)

Hardware Used

GG x 1

x 1

Steel

Washer

Ceiling

Support Cable

Hardware Used

HH x 1

Long Lag

Bolt

EE x 1

Steel

Washer

1. To attach ceiling support cable (JJ), drill a

1/4 in. pilot hole, located independently from

the junction box (not included), into the ceiling

joist or structural member. Securely attach the

ceiling support cable (JJ) with the short lag

bolt (GG) and steel washer (EE). (Fig. 1)

WARNING

Failure to follow these hanger bracket

installation procedures may result in

damage to hanger bracket.

NOTE: Ceiling support cable must be fastened in

the ceiling joists with 2 in. lag bolt.

JJ EE GG

NOTE: No lubrication to be used on screw. Pilot

hole for lag screw to be no larger than 1/4 in

diameter. Screw must have at least 1-1/2 in of

thread engagement into structure joist.

1½ in.

Minimum

Short Lag

Bolt

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Harbor Breeze Lüfter Handbücher

Harbor Breeze

Harbor Breeze LAKE LAGODA LP8300LAZ Bedienungsanleitung

Harbor Breeze

Harbor Breeze 856 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 317058 Bedienungsanleitung

Harbor Breeze

Harbor Breeze WO52BB5C Bedienungsanleitung

Harbor Breeze

Harbor Breeze 80202 Bedienungsanleitung

Harbor Breeze

Harbor Breeze QUIMBY LP8078LAZ Bedienungsanleitung

Harbor Breeze

Harbor Breeze COGDELL COG60BNK7LR Bedienungsanleitung

Harbor Breeze

Harbor Breeze ARMORY 40087 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 41161 Bedienungsanleitung

Harbor Breeze

Harbor Breeze MZ44WW3LR Bedienungsanleitung

Harbor Breeze

Harbor Breeze FLANAGAN Bedienungsanleitung

Harbor Breeze

Harbor Breeze MAZON MZ44MBLK3LR Bedienungsanleitung

Harbor Breeze

Harbor Breeze 873 Bedienungsanleitung

Harbor Breeze

Harbor Breeze C-BTH44ABZC5L Bedienungsanleitung

Harbor Breeze

Harbor Breeze MERRIMACK 40942 Handbuch

Harbor Breeze

Harbor Breeze MAZON MZ44BNK3LR Bedienungsanleitung

Harbor Breeze

Harbor Breeze 40945 Bedienungsanleitung

Harbor Breeze

Harbor Breeze SARATOGA Bedienungsanleitung

Harbor Breeze

Harbor Breeze BELLEVUE E-BE44ABZ5C Bedienungsanleitung

Harbor Breeze

Harbor Breeze 40105 Bedienungsanleitung

Harbor Breeze

Harbor Breeze CLASSIC STYLE BDB52LW5N Bedienungsanleitung

Harbor Breeze

Harbor Breeze TILGHMAN WCK52LMW5N Bedienungsanleitung

Harbor Breeze

Harbor Breeze TIEMPO E-TM52BNK5CS Bedienungsanleitung

Harbor Breeze

Harbor Breeze TALAMORE TAL60BNK8LR Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung