Harbor Breeze DUBOIS DM52BCP5CS Bedienungsanleitung

Federal regulations require ceiling fans with light kits manufactured or imported after

January 1, 2009, to limit total wattage consumed by the light kit to 190W. Therefore,

this fan is equipped with a wattage limiting device. If you lamp this fan's light kit with

bulbs totaling more than 190W, the wattage limiting device will reduce the watts

consumed to 190W.

ATTACH YOUR RECEIPT HERE

Serial Number Purchase Date

EB14489 1

Lowes.com/harborbreeze

E192641

LISTED

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. -

5 p.m., EST, Friday.

Harbor Breeze® is a registered trademark

Español p. 21

DUBOIS CEILING FAN

MODEL #DM52BCP5CS

ITEM #0125519

Español p. 22

Safety Information ....…………………………………………………………………………...……....... 2

Package Contents ........…………………………………………………………………..……..…..….. 4

Hardware Contents ......................................................................................................................... 5

Preparation .......................….…………………..……………………….…………….………………..... 5

Initial Installation ............................……………………...…………………………………................... 6

Downrod-Style Fan Mounting .....…………………………....……………....……................................ 7

Closemount-Style Fan Mounting ..........…....................…...............…....……………………............ 10

Wiring ......................................................................................………………………....................... 11

Final Installation .............................……………………….……….................................................... 13

Operating Instructions..............................................................………………………....................... 17

Care and Maintenance ....………………………………………………………………......................... 18

Troubleshooting ........................………...………………………….……………..……........................ 19

Limited Lifetime Warranty ……….…………………………………………..….................................... 20

Replacement Parts List ................................................................................................................. 21

TABLE OF CONTENTS

2Lowes.com/harborbreeze

SAFETY INFORMATION

READ AND SAVE THESE INSTRUCTIONS

Please read and understand this entire manual before attempting to assemble, install or operate the

product.

• Do not discard fan carton or foam inserts. Should this fan need to be returned to the factory for

repairs, it must be shipped in its original packaging to ensure proper protection against damage

that might exceed the initial cause for return.

• Make sure all electrical connections comply with local codes, ordinances, the National Electrical

Code and ANSI/NFPA 70-1999. Hire a qualified electrician or consult a do-it-yourself wiring

handbook if you are unfamiliar with installing electrical wiring.

• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to

the floor and at least 30 in. from the end of the blades to any obstruction.

• After you install the fan, make sure all connections are secure to prevent the fan from falling.

• The net weight of this fan, including the light kit, is: 22.9 lbs.

SAFETY INFORMATION

To reduce the risk of fire, electrical shock or personal injury, mount fan to outlet box

marked "ACCEPTABLE FOR FAN SUPPORT OF 35 LBS. (15.9 KG) OR LESS" and use

mounting screws provided with the outlet box. Most outlet boxes commonly used for the

support of lighting fixtures are not acceptable for fan support and may need to be replaced.

Consult a qualified electrician if in doubt.

When mounting fan to a ceiling outlet box, use a METAL octagonal outlet box. Secure the outlet

box directly to the building structure. The outlet box and its support must be able to support the

moving weight of the fan (at least 35 lbs.). Do NOT use a plastic outlet box.

To avoid personal injury, the use of gloves may be necessary while handling fan parts with

sharp edges.

To reduce the risk of fire, electrical shock or personal injury, wire connectors provided with this fan

are designed to accept only one 12-gauge house wire and two lead wires from the fan. If your

house wire is larger than 12-gauge or there is more than one house wire to connect to the

corresponding fan lead wires, consult an electrician for the proper size wire connectors to use.

To reduce the risk of fire or electrical shock, do not use the fan with any solid state speed control

device or control fan speed with a full range dimmer switch.

To reduce the risk of fire, electrical shock or personal injury, do not bend the blade arms when

installing them, balancing the blades or cleaning the fan. Do not insert objects between the

rotating fan blades.

To reduce the risk of personal injury, use only parts provided with this fan. The use of parts

OTHER than those provided with this fan will void the warranty.

WARNING

CAUTION

Before proceeding, be sure to shut off electricity at main switch or circuit breaker in order to avoid

electrical shock.

Read all instructions and safety information before installing your new fan. Review the

accompanying assembly diagrams.

Lowes.com/harborbreeze

PACKAGE CONTENTS

Lowes.com/harborbreeze

DESCRIPTIONPART QUANTITY

IMPORTANT REMINDER: You must use the

parts provided with this fan for proper installation

and safety.

A Downrod 1

B Canopy 1

C Mounting Bracket 1

D Motor Housing 1

E Fitter Plate Screw 3

(preassembled)

F Yoke Cover 1

G Light Kit Fitter 1

H Blade Arm 5

I Blade 5

J Glass Shade 4

DESCRIPTIONPART QUANTITY

K Motor Screw 10

(preassembled)

L Lock Washer 10

(preassembled)

M Canopy Mounting Screw 4

(preassembled)

N Pin (preassembled) 1

O Clip (preassembled) 1

P Pull Chain Extension 2

Q Socket Ring 4

(preassembled)

R Switch Housing 1

S Bulb 4

T Balancing Kit 1

HARDWARE CONTENTS (shown actual size)

Blade

Screw

Qty. 15

+ 1 extra

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and hardware contents list. If any part is missing or damaged, do not attempt to

assemble the product.

Estimated Assembly Time: 120 minutes

Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety

Glasses, Stepladder and Wire Strippers

Helpful Tools (not included): AC Tester Light, Tape Measure, Do-It-Yourself Wiring Handbook

(available at Lowe’s) and Wire Cutters

DANGER: When using an existing outlet box, make sure the outlet box is securely attached to

the building structure and can support the full weight of the fan. Failure to do this can result in serious

injury or death. The stability of the outlet box is essential in minimizing wobble and noise in the fan

after installation is complete.

CAUTION: Be sure outlet box is properly grounded and that a ground wire (green or bare) is

present.

After opening top of carton, remove mounting hardware package from foam inserts. Remove motor

from packing and place on carpet or on foam to avoid damage to ﬁnish.

CAUTION: Carefully check all screws, bolts and nuts on fan motor assembly to ensure they are

secured.

PREPARATION

E3 Wire

Connector

Qty. 4

Fiber

Blade

Washer

Qty. 15

+ 1 extra

Lowes.com/harborbreeze

Hex

Nut

Qty. 1

Lock

Washer

Qty. 1

DD EE

Turn off circuit breakers and wall switch to the fan

supply line leads.

DANGER: Failure to disconnect power supply

prior to installation may result in serious injury or

death.

3. Check to make sure blades (I) will be at least 30 in.

from any obstruction and at least 7 ft. above the

floor.

INITIAL INSTALLATION

OFF

Lowes.com/harborbreeze

7 ft.

min.

30 in.

min.

Determine mounting method to use.

A. Downrod-style (standard or angled ceiling)

B. Closemount-style (standard ceiling only)

IMPORTANT: If using the angle mount, ensure the

ceiling angle is not steeper than 19°.

*Helpful Hint: Downrod-style mounting is best suited

for ceilings 8 ft. high or higher. For taller ceilings you

may want to use a longer downrod (not included).

Angle-style mounting is best suited for angled or

vaulted ceilings. A longer downrod is sometimes

necessary to ensure proper blade clearance.

INITIAL INSTALLATION

4. Secure mounting bracket (C) to outlet box (not

included) using screws, spring washers and flat

washers provided with the outlet box.

*NOTE: It is very important you use the proper

hardware when installing the mounting bracket (C)

as this will support the fan.

IMPORTANT: If using the angle mount, make sure

open end of mounting bracket (C) is installed facing

the higher point of the ceiling.

5. Remove motor screws (K) and lock washers (L)

from underside of motor housing (D). Set aside for

later use. [If there are plastic motor blocks installed

with the motor screws (K) and lock washers (L),

discard the plastic motor blocks.]

Remove pin (N) and clip (O) from yoke at the top of

motor housing (D) and partially loosen

preassembled set screws and nuts.

DOWNROD-STYLE FAN MOUNTING

Lowes.com/harborbreeze

For DOWNROD-STYLE FAN MOUNTING, proceed

to step 1 below. For CLOSEMOUNT-STYLE FAN

MOUNTING, skip to page 10.

Set

Screws

and Nuts

Open End

Plastic

Motor

Block

Yoke

Standard Mount Angle Mount

Slip downrod (A) into yoke, align holes and

re-install pin (N) and clip (O). Tighten set

screws in yoke and then tighten preassembled

nuts on the set screws.

DOWNROD-STYLE FAN MOUNTING

Depending on the length of downrod you use,

you may need to cut the lead wires back to

simplify the wiring. If you decide to cut back the

lead wires, it is suggested you do so in the

following manner:

Take the lead wires and make sure you have

pulled them all the way through the top of the

downrod. Start at the TOP of the ball on the

downrod and measure 8 in. of lead wire, and

then cut the excess wire off with wire cutters (not

included).

NOTE: If you do not cut back the lead wires,

Steps 4 and 5 are not necessary and you may

proceed to Step 6 instead.

2. Insert downrod (A) through canopy (B) and

yoke cover (F). Thread wires from motor

housing (D) up through downrod (A).

Lowes.com/harborbreeze

Ball

Set Screws

and Nuts

Sideview

Lowes.com/harborbreeze

If you decided to cut back the lead wires in Step 4,

strip 1/2 in. of insulation from end of white wire.

Twist stripped ends of each strand of wire within

the insulation with pliers (not included). Repeat

Step 5 for black, blue (if applicable) and green

wires.

5. 5

DOWNROD-STYLE FAN MOUNTING

Install ball end of downrod (A) into opening of

mounting bracket (C). Align slot in ball with tab in

mounting bracket (C).

DANGER: Failure to align slot in ball with tab

may cause the fan to wobble or fall, which could

result in serious injury or death.

Continue to WIRING on page 11.

Slot

Tab

CLOSEMOUNT-STYLE FAN MOUNTING

1. Remove canopy cover from bottom of canopy (B).

[NOTE: It may be necessary to use the handle end

of a screwdriver (not included) to remove the

canopy cover by tapping on the canopy cover from

the inside of the canopy (B).]

*Helpful Hint: Closemount-style mounting is more

suitable for ceilings lower than 8 ft. high. The

downrod (A), hanging ball, yoke cover (F) and

canopy cover are not used in this type of

installation.

Remove every other screw and lock washer from

top of motor housing (D).

Pull wires up through hole in the middle of the

canopy (B) and attach canopy (B) to motor

housing (D) using the three screws and three lock

washers previously removed. B

Lowes.com/harborbreeze

Canopy

Cover

Inhaltsverzeichnis

Sprachen:

Andere Harbor Breeze Lüfter Handbücher

Harbor Breeze

Harbor Breeze 856 Bedienungsanleitung

Harbor Breeze

Harbor Breeze ELEVATION LP8006LBN Bedienungsanleitung

Harbor Breeze

Harbor Breeze 41182 Bedienungsanleitung

Harbor Breeze

Harbor Breeze NAVIN 41555 Bedienungsanleitung

Harbor Breeze

Harbor Breeze WELLSBORO 42072 Handbuch

Harbor Breeze

Harbor Breeze ARMORY 40087 Bedienungsanleitung

Harbor Breeze

Harbor Breeze TIEMPO E-TM52BNK5CS Bedienungsanleitung

Harbor Breeze

Harbor Breeze PLM52CB5D Bedienungsanleitung

Harbor Breeze

Harbor Breeze E-TM52BNK5LED Bedienungsanleitung

Harbor Breeze

Harbor Breeze 40678 Bedienungsanleitung

Harbor Breeze

Harbor Breeze CLASSIC STYLE BDB52LW5N Bedienungsanleitung

Harbor Breeze

Harbor Breeze RC103L Bedienungsanleitung

Harbor Breeze

Harbor Breeze WAVEPORT STYLE E-WK52NWZ5C1 Bedienungsanleitung

Harbor Breeze

Harbor Breeze BUILDER'S SERIES 40698 Bedienungsanleitung

Harbor Breeze

Harbor Breeze MERRIMACK II 41125 Bedienungsanleitung

Harbor Breeze

Harbor Breeze FLANAGAN Bedienungsanleitung

Harbor Breeze

Harbor Breeze QUIMBY LP8078LAZ Bedienungsanleitung

Harbor Breeze

Harbor Breeze Casual-3-2011 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 872 Bedienungsanleitung

Harbor Breeze

Harbor Breeze QUONTA CFH52BNK5L Bedienungsanleitung

Harbor Breeze

Harbor Breeze 40680 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 40410 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 40045 Bedienungsanleitung

Harbor Breeze

Harbor Breeze URBANIA Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung