HBM P6A Bedienungsanleitung

Absolute pressure transducer

P6A

Mounting instructions

Electrical

measurement

of mechanical

quantities

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]

SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]

SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]

P6A

Contents Page

Safety instructions 4..............................................

1 List of components supplied 7.................................

2 Application 7.................................................

2.1 Use in areas where there is a risk of explosion 8...............

3 Construction and operating mode 8............................

4 Assembly 8...................................................

5 Electrical connection 11........................................

5.1 Cable extension 12..........................................

6 Differential pressure measurement circuit 13.....................

7 Measurement 14...............................................

7.1 Measuring dynamic pressures 14.............................

8 Technical Data (in accordance with DIN 16 086) 15................

9 Dimensions (in mm) 16.........................................

10 Options 18....................................................

11 Certificate of Conformance 19..................................

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]

SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]

4P6A

Safety instructions

Use in accordance with the regulations

The P6A pressure transducer is to be used exclusively for pressure

measurement and directly related control tasks. Any other use is deemed to

be not as prescribed.

To ensure safe operation, the transducer must only be used in accordance

with the specifications in the User Manual. It is also essential to comply with

the statutory and safety regulations relevant to the particular application. This

also applies to the use of accessories.

The pressure transducer is not a safety device as defined in the regulations

for use. The perfectly safe operation of this pressure transducer requires

suitable transport as well as technically correct storage, installation and

assembly coupled with careful operation.

General dangers in non-observance of the safety instructions

The pressure transducer corresponds to the state of the art and is safe to

operate. The pressure transducer can give rise to residual danger if

improperly installed and operated by untrained personnel.

All personnel involved in the installation, commissioning, maintenance or

repair of the pressure transducer must have read and understood the User

Manual and in particular the technical safety instructions.

Accident prevention

Care must be taken to ensure that when the pressure transducer is being

installed or removed, there is no pressure in the circuit.

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]

SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]

P6A

Residual dangers

The scope of the capabilities and components provided with the transducer

covers only a part of pressure measurement technology. Equipment planners,

installers and operators must plan, carry out and accept responsibility for the

safety engineering aspects of pressure measurement technology in such a

way that residual dangers are kept to a minimum. All existing regulations must

be complied with. There must be reference to the residual dangers connected

with pressure measurement technology.

Where residual dangers arise when working with the P6A, these are

highlighted in this Manual with the following symbols:

Symbol:

DANGER

Meaning:

Maximum danger level

Signifies a directly dangerous situation which, if the safety requirements are

not observed, will result in death or serious physical injury.

Symbol:

WARNING

Meaning:

Possibly dangerous situation

Signifies a possible dangerous situation which, if the safety requirements are

not observed, could result in death or serious physical injury.

Symbol:

CAUTION

Meaning:

Dangerous situation

Signifies a possible dangerous situation which, if the safety requirements are

not observed, could result in damage to property or mild to moderate physical

injury.

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]

SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]

6P6A

Symbol:

Note

Signifies that important information is being given about the product or the use

of the product.

Symbol:

Meaning:

CE mark

The CE mark enables the manufacturer to guarantee that the product

complies with the requirements of the relevant EC guidelines (see Certificate

of Conformance at the end of this User Manual).

Safety-conscious working

Fault-messages must only be acknowledged if the cause of the fault has been

eliminated and no further danger exists.

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]

SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]

P6A

Conversions and modifications

The pressure transducer must not be modified from the design or

safety-engineering point of view without our express agreement. Any

modification precludes liability on our part for any damage resulting therefrom.

Qualified personnel

The pressure transducer must only be installed and operated by qualified

personnel strictly in accordance with the technical data relating to the safety

requirements and safety rules and regulations below. ‘ It is also essential to

comply with the statutory and safety regulations relevant to the particular

application. This also applies to the use of accessories.

”Qualified personnel” means persons familiar with the installation, assembly,

commissioning and operation of the product who possess the qualifications

appropriate to their function.

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]

SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]

8P6A

1 List of components supplied

P6A Absolute Pressure Transducer, User Manual

P6A 10 to 500bar: 1 USIT1) gasket U 12.7 x 20 x 1.5

Also available:

-- Cable socket HK6S

(for variants with HS6P connector2)) Order no. 3-3312.0095

-- Unterminated connector cable

(for variants with HS6P connector2)) Order no. 1-KAB405.30A-3

-- Connecting plug MS3106A16S-1P Order no. 1-MS3106P7

-- 15-pin D-connector Order no. 3-3312.0182

-- Adapter for process port

M20 , to 500bar Order no. 1-P3M/500/M20

G1/2, to 500bar Order no. 1-P3M/500/R1/2

1) The USIT-gasket as delivered is a standard version supplied by C. Freudenberg, 69469 Weinheim. It

consists of mineral oil-based synthetic rubber and corrosion-resistant steel, and can be used from --30 to

+100C.

2) Corresponds to PT06E-10-6S, supplied by Bendix or UPT06J-10-6S, supplied by Canon

2 Application

Absolute pressure transducers are suitable for measuring static and dynamic

pressures in fluids and gases. They are available for various measuring

ranges in steps from 1 to 500bar and with various electrical connection

options, see Chapter 10 ”Options”.

The transducer housings are made from stainless steel, and seal the

measuring system hermetically against all harmful influences, so that even

continuous harsh operating conditions do not adversely affect the reliability

and precision of the transducers.

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]

SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]

P6A

Parts in contact with the medium are made of 1.4301 and 1.4542 stainless

steel. Any fluid or gas (vapour) that does not attack these steels is a suitable

measurement medium. The pressure transducer is attached by means of its

threaded connector for the pressure connector and can be installed in any

position. In particular cases there are specific instructions in Chap. 4

”Assembly” which must be followed!

3 Construction and operating mode

The internal measurement tube bears the strain gauges that are connected to

a Wheatstone bridge. The SG application is located in a hermetically sealed

reference chamber. This protects it from ambient effects and the pressure

measurement is not affected by the ambient pressure (absolute pressure

transducer).

The measuring membrane is strained by the pressure applied. As a result,

with thin-film strain gauges the ohmic resistance changes proportionally to the

pressure and the Wheatstone bridge is detuned.

4 Installation

Caution: Pulling on the housing or the cable entry will result in

mechanical damage to the transducer.

Pressure transducers can be screwed into place in any location. If a

transducer is used for measuring dynamic pressure trends in fluids,itmust

be installed with the pressure connector upwards so that an air-bulge cannot

form in the measurement tube.

When tightening, the wrench (size 27) must only be applied

to the clamping area of the mounting flange, and not to the

housing or cable entry.The permitted tightening torque is

30Nm.

WARNING

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]

SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]

10 P6A

For a perfect seal the bearing surfaces must be substantially flat and free from

tooling marks. The pin hole must have no spot-facing and should be only

lightly deburred, since the pressure of the measurement medium forces the

packing lips against the transducer and the bearing surface.

Caution: Before the P6A pressure transducer is installed or

removed, care must be taken to ensure that there is no

pressure in the circuit.

AF 27

USITRing

sharp-edged

Fig. 4.1: Installation of the pressure transducer

DANGER

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]

SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]

Inhaltsverzeichnis

Beliebte Wandler Handbücher anderer Marken

Camille Bauer

Camille Bauer SINEAX F534 Bedienungsanleitung

Trane

Trane KIT 16724 Montageanleitung

Lumel

Lumel P18 Bedienungsanleitung

B&C Speakers

B&C Speakers DE75PTN Bedienungsanleitung

MAMAC SYSTEMS

MAMAC SYSTEMS PR-243 Handbuch

Mianyang Weibo Electronic

Mianyang Weibo Electronic WB Series Bedienungsanleitung

ProMinent

ProMinent Dulcometer DMT Bedienungsanleitung

MKS

MKS MicroPirani 925 Series Anleitung zur Verwendung

WIKA

WIKA WU-20 Bedienungsanleitung

Alcatel Vacuum Technology

Alcatel Vacuum Technology BARATRON 622A Bedienungsanleitung

Camille Bauer

Camille Bauer SIRAX CH-5610 Bedienungsanleitung

WIKA

WIKA F2802 Bedienungsanleitung

Veris Industries

Veris Industries PW Series Bedienungsanleitung

Simrad

Simrad ES120-7C - REV D Benutzerhandbuch

Airmar

Airmar M260 Bedienungsanleitung

Spirax Sarco

Spirax Sarco ITV1030 Bedienungsanleitung

halstrup-walcher

halstrup-walcher PU10 Bedienungsanleitung

Balluff

Balluff BTL5-P Bedienungsanleitung