Hidden M356942 Bedienungsanleitung
Hidden Video Recording
System Manual
P/N: F40072B00
Patent No. M356942
- 1 -
Thank you for purchasing our Hidden Video Recorder System.
Please read this manual before installation.
For customer support, please contact your dealer, and please
keep your Invoice for further support.
EU Environmental Protection
The symbol of crossed-out garbage shows that this
product should not be treated as household waste,
and it falls into the category of electric /electronic
equipment for recycling. This electronic device
should not be disposed in a regular trash. We
strongly advice you to contact related authorization
before you dispose this product.
Do not open/modify the device, as it may cause
damage to the unit. For internal repairs, consult your
dealer or an Authorized Service Center.
Do not use any accessories other than what comes
with the unit; otherwise, it would be out of warranty.
Protect from humidity. Do not put it in water and
be careful to protect it from rain, sea water, or high
humidity environment etc.
Protect from high temperatures
To avoid damage or mis-operation of the device,
only use in temperature of 0 ~ +40°C.
Do not bring the device suddenly from a hot to a
cold place, or vice versa. This may cause damaged
to the inside of the unit by creating condensation.
- 2 -
Package Contains.............................................................3
Quick Setup.......................................................................4
How to open 2nd Generation Black Box...........................4
Instruction..........................................................................4
Installation.........................................................................5
1. How to open battery cover .....................................5
2. How to insert/ draw out Micro SD card...................5
3. How to open camera cover ....................................5
4. How to change camera angle ................................6
5. How to install the bracket.......................................8
6. How to charge the battery......................................8
7. IR Remote control sensing area.............................8
Default Value.....................................................................9
Start to record ...................................................................9
Playback Function.............................................................9
Remote Control Diagram ................................................10
Screen Icons...................................................................11
LED status.......................................................................12
Recording Duration.........................................................12
The most frequent use and important functions..............13
FAQ.................................................................................15
Specifications..................................................................16
Contents
- 3 -
Package Contains
2nd Generation Black Box
IR remote control
Power adapter (12VDC)
Bracket
AV Output cable
User manual
Micro SD Card reader
(optional)
3.7V 4800mA Li-polymer
battery
Micro SD card
(optional)
Charger cradle for Li-polymer
battery (optional)
- 4 -
Quick Setup
Step 1: Open the back cover
Step 2: Fully charge the battery for 10 hours for the first time
using (please backup or format Micro SD card
regularly to keep it efficient)
Step 3: Insert Micro SD card into Micro SD slot
Step 4: Set camera in the direction of your required
application
Step 5: Press “ON” (power switch) to turn on 2nd Generation
Black Box. The LED will be on and buzzer will beep
around 2 seconds. To turn off 2nd Generation Black
Box, press and hold “ON” for 5 seconds and let go, all
LEDs will be off.
*Set the DATE/TIME to current date and time before
recording; or the recording date and time will be incorrect.
*Use bundled accessories. Damage which is caused by other
device will be beyond warranty
How to open 2nd Generation Black Box
Instruction
- 5 -
Installation
1. How to open battery cover
2. How to insert/ draw out Micro SD card
* Always power off the unit before removing the Micro SD card,
otherwise, the card may be damaged.
* Never remove Micro SD card from your computer without using the
“Safely Remove Hardware” icon in your computer system tray.
3. How to open camera cover
Turn the device upside down.
Firstly open back cover and
then slide off the battery cover
according to the direction of
arrow (from two points to three
points)
After removing the battery
cover, take out the battery for
charging or changing the
battery. Please make sure of
the right direction when slide
battery back into place.
Firstly open the back cover of the
device. Insert micro SD card in the
slot. Never force the card into slot
& make sure the direction is
correct. Press micro SD card for
drawing out.
Insert any flat or sharp-pointed
stick into the slot to pull open the
camera cover.
- 6 -
How to close camera cover
4. How to change camera angle
Firstly remove the battery
cover and then the camera
cover. Take out the camera
Turn the camera 180∘
horizontally
Make the camera lens
facedown and put it back to
the device. Make sure that
the poles are correctly
inserted into the holes of
camera mechanism.
Firstly insert the camera cover into
the slot. Push it toward the direction
of A and make the cover tightly
fixed. After the cover is fixed in side
A, press the cover down toward B.
- 7 -
Two options for shot angle
To return to the original condition
Turn the camera 180∘
horizontally.
Take out the camera and
turn it 90∘vertically to make
the lens face front
Put the camera cover on and
then the battery cover. Close
the back cover
Put the camera back to the
unit. Make sure that the poles
appropriately fit in with the
camera and make the camera
neatly fit in.
- 8 -
5. How to install the bracket
6. How to charge the battery
Connect bundled power adapter to power DC jack. The yellow
LED will be on if the battery is charging. Please fully charge for
7~8 hours. (Please charge for 10 hours when you charge the battery
for the first time.) With the optional cradle, the charging time is
around 3 hours and the green LED will be on. The battery, after
fully charged, can last for 6.5 hours at least under continuous
recording. Under motion activation or power saving when out of
schedule, 2nd Generation Black Box can last for longer.
* NOTE: Under low temperature conditions, the battery will have
a shorter life than normal
* NOTE: Please use the bundled power adapter only. Damage
which is caused by other power adapter will be beyond
warranty.
* NOTE: Please charge the battery immediately after you receive
the unit
* NOTE: Users are highly recommended to charge the battery
once every 3 months to activate Li-polymer battery.
7. IR Remote control sensing area
Screw the bracket to the hole in the back of 2n
d
Generation
Black Box. Fasten the entire unit on the wall.
Please point the IR remote
control at the marked area
- 9 -
Default Value
Video Resolution: 720x480
Recording Quality: Fair (1.2Mb)
Frame Rate: 25/30 frames per second
Motion Sensitivity: High
Motion Area: All area effective
Schedule Setting: All (Sunday to Saturday) motion recording
Storage: Overwrite (Will delete old recordings when card full)
Recording Length: 30 minutes a file
Date/Time Stamp Format: YYYY/MM/DD
Date/Time Stamp Position: Upper right
Date / Time Stamp Color: White
Language: English
External Trigger: Deactivate (No use for this device)
Status Display: On
Start to record
Once power on unit, recording is factory preset at motion
activated. It can be reset as continuous recording, having
scheduled, and external trigger activation thru MENU. Manual
recording can always take place when button is pressed.
(Please refer to “Remote Control” section)
* Please press “menu” key before taking away the Micro SD card;
otherwise, the recording will not be saved onto Micro SD card.
Playback Function
Press key on remote control to get into playback menu. You
can use “Quick search”, and enter the date/time which you
would like to view. Or get into “List all”, and press button to
playback from a selected recording.
Inhaltsverzeichnis
