HIK VISION DS-2CC102PN-IRA Bedienungsanleitung

Day/Night Bullet Camera·User Manual

IR Bullet Camera

User Manual

V1.0.0

Day/Night Bullet Camera·User Manual

Thank you for purchasing our product. If there are any questions,

or requests, please do not hesitate to contact the dealer.

This manual applies to DS-2CC102P(N)-IRA, DS-2CC112P(N)-IRA,

DS-2CC192P(N)-IRA, DS-2CC1182P(N)-IRA,

DS-2CC1192P(N)-IRA, DS-2CC11A2P(N)-IRA Bullet Camera.

This manual may contain several technical incorrect places or

printing errors, and the content is subject to change without notice.

The updates will be added to the new version of this manual. We

will readily improve or update the products or procedures

described in the manual.

DISCLAIMER STATEMENT

“Underwriters Laboratories Inc. (“UL”) has not tested the

performance or reliability of the security or signaling aspects of this

product. UL has only tested for fire, shock or casualty hazards as

outlined in UL’s Standard(s) for Safety, UL60950-1. UL

Certification does not cover the performance or reliability of the

security or signaling aspects of this product. UL MAKES NO

REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS

WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY

OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS

PRODUCT.”

Day/Night Bullet Camera·User Manual

Regulatory Information

FCC Information

FCC compliance: This equipment has been tested and found to

comply with the limits for a digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the

interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation

EU Conformity Statement

This product and - if applicable - the supplied

accessories too are marked with "CE" and comply

therefore with the applicable harmonized

European standards listed under the Low Voltage Directive

2006/95/EC, the EMC Directive 2004/108/EC.

Day/Night Bullet Camera·User Manual

2002/96/EC (WEEE directive): Products marked

with this symbol cannot be disposed of as unsorted

municipal waste in the European Union. For proper

recycling, return this product to your local supplier

upon the purchase of equivalent new equipment, or dispose of it at

designated collection points. For more information see:

www.recyclethis.info.

2006/66/EC (battery directive): This product

contains a battery that cannot be disposed of as

unsorted municipal waste in the European Union.

See the product documentation for specific battery

information. The battery is marked with this

symbol, which may include lettering to indicate cadmium (Cd),

lead (Pb), or mercury (Hg). For proper recycling, return the battery

to your supplier or to a designated collection point. For m

information see: www.r

ore

ecyclethis.info.

Day/Night Bullet Camera·User Manual

Safety Warnings and Cautions

Please pay attention to the following warnings and

cautions:

Hazardous Voltage may be present: Special

measures and precautions must be taken when

using this device. Some potentials (voltages) on the

device may present a hazard to the user. This device

should only be used by Employees from our company with

knowledge and training in working with these types of devices that

contain live circuits.

Power Supply Hazardous Voltage: AC mains voltages

are present within the power supply assembly. This device must be

connected to a UL approved

, completely enclosed power supply, of

the proper rated voltage and current. No user serviceable parts

inside the power supply.

Day/Night Bullet Camera·User Manual

System Grounding (Earthing): To avoid shock, ensure

that all AC wiring is not exposed and that the earth grounding is

. E e

power supply cord is the main disconnect device to

Installation and Maintenance: Do not connect/disconnect

any cables to or perform installation/maintenance on this device

during an electrical storm.

maintained

attached is

and are appr

nsure that any equipment to which this device will b

lso connected to properly wired grounded receptacles

oved medical devices.

Power Connect and Disconnect: The AC

mains (AC power).The socket outlet shall be

installed near the equipment and shall be readily

accessible.

Power Cord Requirements: The connector

that plugs into the wall outlet must be a

grounding-type male plug designed for use in your

region. It must have certification marks showing certification by an

agency in your region. The connector that plugs into the AC

y. There

is a risk of explosion if the battery is replaced by an incorrect type.

receptacle on the power supply must be an IEC 320, sheet C13,

female connector. See the following website for more information

http://kropla.com/electric2.htm.

Lithium Battery: This device contains a Lithium Batter

Day/Night Bullet Camera·User Manual

Dispose of used batteries according to the vendor’s instruction

and in accordance with local environmental regulations.

Perchlorate Material: Special handling may apply. See

www.dtsc.ca.gov/hazardouswaste/perchlorate. This notice is

required by California Code of Regulations, Title 22, Division 4.5,

ent Practices for Perchlorate Materials.

in des a battery which contains perchlorate material.

Please recycle batteries.

heat sinks, power regulators,

ate radio

o radio

and off, the user is

Chapter 33: Best Managem

cluThis device

Taiwan battery recycling:

Thermal and Mechanical Injury: So

components such as

and processors may be hot; care should be taken

to avoid contact with these components.

Electro Magnetic Interference: This equipment has no

been tested for compliance with emissions limits of FCC and similar

international regulations. This device is not, and may not be,

offered for sale or lease, or sold, or leased until authorization fr

the United States FCC or its equivalent in other countries has been

obtained. Use of this equipment in a residential location is

prohibited. This equipment generates, uses and can radi

frequency energy which may result in harmful interference t

communications. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment on

Day/Night Bullet Camera·User Manual

required to take measures to eliminate the interference or

nvironmental

regulations for proper recycling; do not dispose

of device in unsorted municipal waste.

use of this equipment.

Please recycle this device in a responsible

manner. Refer to local e

discontinue th

Lead Cont

Day/Night Bullet Camera·User Manual

Safety Instruction

These instructions are intended to ensure that user can use the

product correctly to avoid danger or property loss.

The precaution measure is divided into “Warnings” and “Cautions”

Warnings: Serious injury or death may occur if any of the

warnings are neglected.

Cautions: Injury or equipment damage may occur if any of the

cautions are neglected.

Warnings Follow these

safeguards to prevent

serious injury or death.

Cautions Follow these

precautions to prevent

potential injury or material

damage.

Warnings

In the use of the product, you must be in strict compliance with

the electrical safety regulations of the nation and region.

Input voltage should meet both the SELV(Safety Extra Low

Voltage).

the Limited Power Source with AC 24V or DC 12V according to

the IEC60950-1 standard.

Please refer to technical specifications for detailed information.

Day/Night Bullet Camera·User Manual

the Limited Power Source with AC 24V or DC 12V according to

the IEC60950-1 standard.

Please refer to technical specifications for detailed information.

Input voltage should meet both the SELV(Safety Extra Low

Voltage) and the Limited Power Source with AC 24V or DC 12V

according to the IEC60950-1 standard. Please refer to

technical specifications for detailed information.

Do not connect several devices to one power adapter as

adapter overload may cause over-heating or a fire hazard.

Please make sure that the plug is firmly connected to the

power socket.

When the product is mounted on wall or ceiling, the device

shall be firmly fixed.

If smoke, odor or noise rise from the device, turn off the power

at once and unplug the power cable, and then please contact

the service center.

If the product does not work properly, please contact your

dealer or the nearest service center. Never attempt to

disassemble the camera yourself. (We shall not assume any

responsibility for problems caused by unauthorized repair or

maintenance.)

Cautions

Make sure the power supply voltage is correct before using the

camera.

Andere Handbücher für DS-2CC102PN-IRA

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HIK VISION Sicherheitskamera Handbücher

HIK VISION

HIK VISION DS-2DE2103 Bedienungsanleitung

HIK VISION

HIK VISION DS-T1 SERIES Gebrauchsanweisung

HIK VISION

HIK VISION DS-2CE16H0T-ITE Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD2D21G0/M-D/NF Bedienungsanleitung

HIK VISION

HIK VISION DS-2XM6222G0-IM-ND-4mm Bedienungsanleitung

HIK VISION

HIK VISION HOT Series Bedienungsanleitung

HIK VISION

HIK VISION PanoVu iDS-2PT9122IX-DE/S Kurzanleitung

HIK VISION

HIK VISION DS-2TP21B-6AVFW Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD7353F-EI Bedienungsanleitung

HIK VISION

HIK VISION DS-2CE56D5T-VFIT3 Bedienungsanleitung

HIK VISION

HIK VISION ECI-B62Z2 Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD series Bedienungsanleitung

HIK VISION

HIK VISION DS-2TD2466-9X Bedienungsanleitung

HIK VISION

HIK VISION NETWORK CAMERA Bedienungsanleitung

HIK VISION

HIK VISION HWI-T220H Bedienungsanleitung

HIK VISION

HIK VISION DS-2CE16H5T-AIT3ZE Bedienungsanleitung

HIK VISION

HIK VISION iDS-TCV507-BIR/1550 Merkblatt

HIK VISION

HIK VISION iDS-2VS435-F840-EY Bedienungsanleitung

HIK VISION

HIK VISION DS-2XE62 2F-IS Series Bedienungsanleitung

HIK VISION

HIK VISION H8T Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2TD2137-4/P Bedienungsanleitung

HIK VISION

HIK VISION ids-mcd202-b Bedienungsanleitung

HIK VISION

HIK VISION DS-2CC5197P-VPIR Bedienungsanleitung

HIK VISION

HIK VISION ECI-T22Fx Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung