HIK VISION iDS-TCV907 Bedienungsanleitung
ITS All-in-one Traffic Camera Configuration Manual
0
Hikvision
iDS-TCV9(5)07
Breve
Manual
(Radar
trigger)
ITS All-in-one Traffic Camera Configuration Manual
i
User Manual
COPYRIGHT ©2017 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties
of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be
“Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced,
changed, translated, or distributed, partially or wholly, by any means, without the prior written
permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties,
guarantees or representations, express or implied, regarding to the Manual.
About this Manual
This Manual is applicable to the intelligent transportation system.
The Manual includes instructions for using and managing the product. Pictures, charts, images
and all other information hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to firmware updates or other
reasons. Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of Hikvision in
various jurisdictions. Other trademarks and logos mentioned below are the properties of their
respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH
ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND
ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE,
AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS,
OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN
CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY
AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL
OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER
ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL
ITS All-in-one Traffic Camera Configuration Manual
ii
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS
USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATER PREVAILS.
ITS All-in-one Traffic Camera Configuration Manual
3
Contents
CHAPTER 1 OVERVIEW.......................................................................................................4
1.1 OBJECTIVE ............................................................................................................................4
1.2 TARGET READER.....................................................................................................................4
1.3 SAFETY PRECAUTIONS.............................................................................................................4
CHAPTER 2 DEVICE ACTIVATION .........................................................................................5
CHAPTER 3 CAMERA CONFIGURATION ...............................................................................8
3.1 UPGRADING PROGRAM AND RESTORING DEFAULT SETTINGS..........................................................8
3.2 MODIFYING TIME ZONE ..........................................................................................................8
3.3 SET LICENSE PLATE RECOGNITION PARAMETERS...........................................................................9
3.4 CHECKING SERIAL PORT...........................................................................................................9
3.5 CONFIGURING APPLICATION MODE PARAMETER........................................................................10
3.6 CONFIGURING FLASH LIGHT PARAMETERS ................................................................................12
3.7 CONFIGURING IMAGE PARAMETERS.........................................................................................12
3.8 CONFIGURING TEXT OVERLAY PARAMETERS ..............................................................................12
CHAPTER 4 RADAR DETECTION......................................................................................... 13
ITS All-in-one Traffic Camera Configuration Manual
4
Chapter 1 Overview
1.1 Objective
This manual is designed to provide standard engineering guidelines for the construction and
configuration of the All-in-one Traffic Camera.
1.2 Target Reader
This manual is written for implementation and maintenance personnel who will install and
configure the All-in-one Traffic Camera.
1.3 Safety Precautions
Road in construction should be semi-closed to avoid risk. And the construction area should
be surrounded with enough reflective cones as cautions.
Constructors should wear reflective vests on site.
Constructors must fasten safety lines when working at high places, and wear hardhats when
working on scaffold or portal frame.
Do not rise or fall the ladder truck sharply during operation.
Be sure to cut off the power supply before installing devices or connecting wires.
ITS All-in-one Traffic Camera Configuration Manual
5
Chapter 2 Device Activation
Purpose:
For the first use of the camera, you need to activate the device by setting an admin password. No
operation is allowed before activation. You can activate the device via SADP.
Steps:
1. Download SADP from the official website‘https://www.hikvision.com/en/’.
2. Run the software.
SADP will automatically search all online devices in LAN. The results are displayed in sheet,
with device type, IP address, security status, device serial No. and many other information, as
shown in the figure below.
Figure 2-1 SADP Search Interface
3. Check the capture camera to be activated to pop up the Activate the Device window on the
right.
4. Set capture camera password in the popup window.
5. Click Activate to complete activation.
ITS All-in-one Traffic Camera Configuration Manual
6
Figure 2-2 Activate the Capture Camera
6. Check the activated camera to pop up the Modify Network Parameters window on the right.
7. Enter camera IP address, subnet mask and admin password.
8. Click Modify to finish IP settings.
Figure 2-3 Modify Camera IP Address
9. Modify the computer’s IP address to be in the same network segment as the camera.
ITS All-in-one Traffic Camera Configuration Manual
7
Figure 2-4 Modify Computer IP Address
10. Using Chrome or IE browser to login the camera.
Figure 2-5 Login
ITS All-in-one Traffic Camera Configuration Manual
8
Chapter 3 Camera Configuration
3.1 Upgrading Program and Restoring Default Settings
.Steps:
Go to Configuration > Capture Maintenance.
Steps:
1. Choose Firmware.
2. Click Upgrade.
3. Restore the camera.
3.2 Modifying Time Zone
Steps:
1. Go to Configuration > System Setting > Time Settings.
2. Select Time Zone.
ITS All-in-one Traffic Camera Configuration Manual
9
3. Click Save.
3.3 Set License Plate Recognition Parameters
1. Go to Configuration → Capture → Capture Parameters → License Parameters.
2. Set Country/Region according to the actual needs.
3. Select License Plate Recognition.
–Select Forward when license plates of vehicles from the approaching direction need to be
recognized.
–Select Backward when license plates of vehicles from the leaving direction need to be
recognized.
3.4 Checking Serial port
Inhaltsverzeichnis
Andere HIK VISION Sicherheitskamera Handbücher
HIK VISION
HIK VISION DS-2CC11A2P-IR Bedienungsanleitung
HIK VISION
HIK VISION DS-2DF8836IV-AEL Bedienungsanleitung
HIK VISION
HIK VISION DS-2CD7153-E Bedienungsanleitung
HIK VISION
HIK VISION A15 Bedienungsanleitung
HIK VISION
HIK VISION DS-2TD2336-50 Bedienungsanleitung
HIK VISION
HIK VISION ECI-B14F2 Bedienungsanleitung
HIK VISION
HIK VISION NETWORK CAMERA Bedienungsanleitung
HIK VISION
HIK VISION DS-2CE16H5T-AIT3ZE Bedienungsanleitung
HIK VISION
HIK VISION DS?2CC5173P(N)?VP(IR)(?H) Bedienungsanleitung
HIK VISION
HIK VISION DS-2DF8C435MHS-DELW Bedienungsanleitung
HIK VISION
HIK VISION DS-2CE16C2T-IRP Bedienungsanleitung
HIK VISION
HIK VISION DS-2AF1-513 Bedienungsanleitung
HIK VISION
HIK VISION ColorVu DS-2CE12KF3T-E Bedienungsanleitung
HIK VISION
HIK VISION TURBO HD DF7T Series Bedienungsanleitung
HIK VISION
HIK VISION DS-2CD5165G0-IZS Bedienungsanleitung
HIK VISION
HIK VISION DS-2CE16CoT-IRPF Bedienungsanleitung
HIK VISION
HIK VISION DS-2CD2T46G2-ISU-SL Bedienungsanleitung
HIK VISION
HIK VISION DS-2TD2667T-15/P Bedienungsanleitung
HIK VISION
HIK VISION HiLook Bedienungsanleitung
HIK VISION
HIK VISION DS-2CD63C5G0-IVS Bedienungsanleitung
