Hioki 3173 Bedienungsanleitung

3173

Instruction Manual

PORTABLE WITHSTANDING

VOLTAGE HiTESTER

Mar. 2019 Revised edition 4

3173A981-04 19-03H

Contents

Introduction i

Inspection i

Safety Notes ii

Notes on Use iv

Chapter Summary v

Chapter 1 Overview 1

1.1 Product Overview 1

1.2 Names and Functions of Parts 2

1.2.1 Front panel 2

1.2.2 Rear panel 4

1.2.3 9615 H.V. TEST LEAD 5

1.3 External Dimensions 6

Chapter 2 Testing Arrangements 7

2.1 Installation of the Unit 7

2.2 Connecting the Protective Ground Terminal 8

2.3 Connecting the External I/O Terminal 9

2.4 Power Cord Connection 10

2.5 Connecting the 9615 H.V. TEST LEAD 11

2.6 Connection to the Measured Equipment 12

2.7 Powering On and Off the 3173 13

2.8 Startup Inspection 14

Chapter 3 Withstand Voltage Testing Method 15

3.1 Starting a Test 16

3.1.1 Setting the Current Threshold Value

(Upper Limit Value) 17

3.1.2 Setting the Timer (Test Time) 18

3.1.3 Setting the Output-voltage 19

3.1.4 Executing a Test 20

3.2 PASS or FAIL Determination 21

3.2.1 "PASS" State 21

3.2.2 "FAIL" State 22

3173A981-04

Chapter 4 External Interface 23

4.1 External I/O Terminal 23

4.1.1 Signal Line 24

4.1.2 Timing Chart of External I/O Terminal 26

4.2 Example of External I/O Terminal 28

4.2.1 Example of Input Signal Connection 28

4.2.2 Example of Output Signal Connection 30

Chapter 5 Specifications 33

5.1 Basic Specifications 33

5.2 General Specifications 35

5.3 9615 H.V. TEST LEAD Specifications 36

Chapter 6 Maintenance and Servise 37

6.1 Maintenance and Inspection 37

6.2 Cleaning 38

6.3 Fuse Replacement 39

_____________________________________________________________________________________________

______________________________________________________________________________________________

WARNING

Before using the product, make sure that the insulation on the test

leads is undamaged and that no bare conductors are improperly

exposed. Using the product under such conditions could result in

electrocution. Replace the test leads specified by Hioki .

Introduction

Inspection

Thank you for purchasing the HIOKI 3173 PORTABLE WITHSTANDING

VOLTAGE HiTESTER. To obtain maximum performance from the product,

please read this manual first, and keep it handy for future reference.

Warranty

HIOKI cannot be responsible for losses caused either directly or indirectly by

the use of the 3173 with other equipment, or if ownership is transferred to a

third party.

When you receive the product, inspect it carefully to ensure that no damage

occurred during shipping. In particular, check the connectors and

accessories. If damage is evident, or if it fails to operate according to the

specifications, contact your dealer or Hioki representative.

Accessories

9615 H.V.TEST LEAD (HIGH/LOW) 1 each

Power cord 1

Spare fuse 1

Instruction Manual 1

Preliminary Checks

Before using the product the first time, verify that it operates normally to

ensure that the no damage occurred during storage or shipping. If you find

any damage, contact your dealer or Hioki representative.

Use the original packing materials when reshipping the product, if possible.

_____________________________________________________________________________________________

______________________________________________________________________________________________

WARNING

This product is designed to conform to IEC 61010 Safety Standards, and

has been thoroughly tested for safety prior to shipment. However,

mishandling during use could result in injury or death, as well as

damage to the product. Be certain that you understand the instructions

and precautions in the manual before use. We disclaim any

responsibility for accidents or injuries not resulting directly from

product defects.

The symbol printed on the product indicates that the user should

refer to a corresponding topic in the manual (marked with the

symbol) before using the relevant function.

In the manual, the symbol indicates particularly important

information that the user should read before using the product.

Indicates that dangerous voltage may be present at this terminal.

Indicates AC (Alternating Current).

Indicates a fuse.

Indicates a protective conductor terminal.

Indicates the ON side of the power switch.

Indicates the OFF side of the power switch.

DANGER

Indicates that incorrect operation presents an extreme hazard that

could result in serious injury or death to the user.

WARNING

Indicates that incorrect operation presents a significant hazard that

could result in serious injury or death to the user.

CAUTION Indicates that incorrect operation presents a possibility of injury to

the user or damage to the product.

NOTE Advisory items related to performance or correct operation of the

product.

Safety Notes

This manual contains information and warnings essential for safe operation

of the product and for maintaining it in safe operating condition. Before

using the product, be sure to carefully read the following safety notes.

Safety Symbols

The following symbols in this manual indicate the relative importance of

cautions and warnings.

iii

_____________________________________________________________________________________________

______________________________________________________________________________________________

WARNING

Using a measuring instrument in an environment designated with a

higher-numbered category than that for which the instrumen is rated

could result in a severe accident, and must be carefully avoided.

Never use a measuring instrument that lacks category labeling in a

CAT II to CAT IV measurement environment. Doing so could result in

a serious accident.

CAT II When directly measuring the electrical outlet receptacles of the

primary electrical circuits in equipment connected to an AC

electrical outlet by a power cord (portable tools, household

appliances, etc.)

CAT III When measuring the primary electrical circuits of heavy equipment (fixed

installations) connected directly to the distribution panel, and feeders

from the distribution panel to outlets

CAT IV When measuring the circuit from the service drop to the service entrance,

and to the power meter and primary overcurrent protection device

(distribution panel)

f.s. (maximum display value or scale length)

The maximum displayable value or the full length of the scale.

This is usually the maximum value of the currently selected range.

rdg. (reading or displayed value)

The value currently being measured and indicated on the measuring

product.

Measurement categories

To ensure safe operation of measuring instruments, IEC 61010 establishes

safety standards for various electrical environments, categorized as CAT II to

CAT IV, and called measurement categories.

Accuracy We define measurement tolerances in terms of f.s. (full scale) and rdg.

(reading) values, with the following meanings:

_____________________________________________________________________________________________

______________________________________________________________________________________________

DANGER

Observe the following precautions to avoid electric shock.

Do not remove the product's case. The internal components of the

product carry high voltages and may become very hot during

operation.

Do not touch the alligator clip while high voltage is being generated.

The vinyl sheath on the alligator clip of the 9615 H.V.TEST LEAD does

not have an insulation withstand voltage.

WARNING

To avoid electric shock, do not allow the product to get wet, and do

not use it when your hands are wet.

To avoid electric shock, connect the protective ground terminal to a

grounded conductor before making any other connections.

Before turning the product on, make sure the source voltage matches

that indicated on the product's power connector. Connection to an

improper supply voltage may damage the product and present an

electrical hazard.

Replace the fuse only with one of the specified characteristics and

voltage and current ratings. Using a non-specified fuse or shorting the

fuse holder may cause a life-threatening hazard.

Fuse type: 250VT1AL (3173, 3173-01), 250VT0.5AL (3173-02, 3173-03, 3173-04)

To avoid electrocution, turn off the power to all devices before

pluggingor unplugging any of the interface connectors.

CAUTION To avoid damaging the power cord, grasp the plug, not the cord, when

unplugging the cord from the power outlet.

To avoid damaging the test leads, do not bend or pull the 9615 H.V. TEST

LEADs.

To avoid damage to the product, protect it from vibration or shock during

transport and handling, and be especially careful to avoid dropping.

Do not use the product near a device that generates a strong

electromagnetic field or electrostatic charge, as these may cause

erroneous measurements.

To avoid electric shock, do not exceed the lower of the ratings shown on

the instrument and test leads.

NOTE This product may cause interference if used in residential areas. Such use must be

avoided unless the user takes special measures to reduce electromagnetic emissions

revent interference to the rece

tion of radio and television broadcasts.

Notes on Use

Follow these precautions to ensure safe operation and to obtain the full

benefits of the various functions.

_____________________________________________________________________________________________

______________________________________________________________________________________________

Chapter Summary

Chapter 1 Overview

Describes an overview, features, and the names and functions of the parts of

the product.

Chapter 2 Testing Arrangements

Describes particulars of testing arrangements.

Chapter 3 Testing Method

Describes procedures for setting, testing, and test results judgment.

Chapter 4 External Interface

Describes use of the external I/O terminal.

Chapter 5 Specifications

Describes the product specifications.

Chapter 6 Maintenance and Servise

Describes the maintenance and inspection, fuse replacement, and ultimate

disposal.

_____________________________________________________________________________________________

______________________________________________________________________________________________

Inhaltsverzeichnis

Andere Hioki Prüfgeräte Handbücher

Hioki

Hioki BT3564 Bedienungsanleitung

Hioki

Hioki ST4030A Bedienungsanleitung

Hioki

Hioki FT6031-03 Bedienungsanleitung

Hioki

Hioki 3636-20 Bedienungsanleitung

Hioki

Hioki RM3543 Bedienungsanleitung

Hioki

Hioki Power HiTester 3193 Bedienungsanleitung

Hioki

Hioki 3169-20 Gebrauchsanweisung

Hioki

Hioki 7016 Bedienungsanleitung

Hioki

Hioki RM3542 Bedienungsanleitung

Hioki

Hioki 3245-60 Bedienungsanleitung

Hioki

Hioki 3415-01 Bedienungsanleitung

Hioki

Hioki BT5525 Bedienungsanleitung

Hioki

Hioki ST5680 Benutzerhandbuch

Hioki

Hioki BT3563A Bedienungsanleitung

Hioki

Hioki 3803 Bedienungsanleitung

Hioki

Hioki MO HiTESTER 3452 Bedienungsanleitung

Hioki

Hioki 3030-10 Bedienungsanleitung

Hioki

Hioki 8807-01 Bedienungsanleitung

Hioki

Hioki 3561 Bedienungsanleitung

Hioki

Hioki 3244-60 Bedienungsanleitung

Hioki

Hioki 3665-20 Bedienungsanleitung

Hioki

Hioki 3156 Bedienungsanleitung

Hioki

Hioki SS7012 Bedienungsanleitung

Hioki

Hioki 3555 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung

Ritmix

Ritmix RAT-701 Bedienungsanleitung