HMS Anybus X-gateway AB7 Series Leitfaden

www.emg-automation.com

Component replacement

instructions

hms Anybus X-gateway AB7xxx

BW_hms Anybus X-gateway_01_en

Document-ID: EMGDES-00010768

Table of contents

hms Anybus X-gateway AB7xxx

BW_hms Anybus X-gateway_01_en

EMG Automation GmbH

Table of contents

Component replacement instructions

1.1

Unpacking the new gateway

1.2

Removing the old gateway

1.3

Installing the new gateway

1.4

Configuring the new Anybus X-gateway

1.5

Example: CANopen –Modbus-TCP

Component replacement instructions

hms Anybus X-gateway AB7xxx

EMG Automation GmbH

BW_hms Anybus X-gateway_01_en

Component replacement instructions

WARNING

Unauthorised start-up/operation of the device by a third party

may result in death or serious bodily injury.

The device must be de-energized.

Cordon-off access routes during repair work (for example, red/white tape)!

Tools required:

▪Screwdriver (5 mm blade width)

▪USB cable for terminals

▪PC with Anybus X configuration software

Unpacking the new gateway

Examine the device for visible damage or contamination.

Only use devices that are technically and visually flawless.

Removing the old gateway

1. Disconnect the supply voltage to the X-gateway. (Green plug-in block terminal, 4-

pin).

2. Prevent the device from being restarted.

3. Disconnect the electrical connections to the X-gateway (mostly plug connectors).

4. Disengage the X-gateway from the DIN rail.

5. Note the DIL switch settings for the new X-gateway.

Installing the new gateway

1. Transfer the DIL switch settings and other settings from the old X-gateway.

2. Insert the X-gateway into the vacant space.

3. Re-establish the electrical connections to the X-gateway (mostly plug connectors).

4. Switch on the supply voltage. (Green plug-in block terminal, 4-pin).

Configuring the new Anybus X-gateway

The Anybus X-gateway transfers the I/O data in both directions, thereby enabling data

exchange between two networks. The X-gateway is configured with the "Anybus Con-

figuration Manager –X-gateways". (see: www.anybus.com) This software can also be

found on the CD in the control cabinet.

Please only connect the PC to the X-gateway after starting the soft-

ware (USB interface).

CONNECT

1.1

1.2

1.3

1.4

Component replacement instructions

hms Anybus X-gateway AB7xxx

BW_hms Anybus X-gateway_01_en

EMG Automation GmbH

Then read in the type of X-gateway online (configuration). (Upload)

UPLOAD

Now enter the quantity of Input I/O_data and Output I/O_data.

Then set the X-gateway for your application by transferring (down-

loading) the configuration.

DOWNLOAD

The module is now fully configured and you can terminate the con-

nection to the module.

DISCONNECT

Finally, it is imperative you save this configuration to the hard

drive. This should be a file with the extension .hcg. The file name

should correspond to the project.

See also

Example: CANopen –Modbus-TCP [➙4]

Example: CANopen –Modbus-TCP

A configuration via Modbus-TCP to ProfiNet with two data words (4 bytes) as the out-

put from the Modbus master and 6 data words (12 bytes) as the input to the Modbus

master.

1.5

Inhaltsverzeichnis

Andere HMS Tor Handbücher

HMS

HMS Anybus Communicator IIoT Benutzerhandbuch

HMS

HMS Anybus X-Gateway Series Bedienungsanleitung

HMS

HMS HMS-EN2MB-R Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC220 Technisches Datenblatt

HMS

HMS Anybus X-gateway Bedienungsanleitung

HMS

HMS Intesis IN776MHI00 O000 Series Montageanleitung

HMS

HMS Intesis INBACDAL1280200 Montageanleitung

HMS

HMS Intesis WMP Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

HMS

HMS Anybus HMS-EN2MB-R Bedienungsanleitung

HMS

HMS Intesis INBACHIT O000 Series Montageanleitung

HMS

HMS Intesis INMBSPAN016O000 Bedienungsanleitung

HMS

HMS Anybus X-gateway CANopen Series Bedienungsanleitung

HMS

HMS Intesis WMP Bedienungsanleitung

HMS

HMS Intesis INMBSHIS016O000 Bedienungsanleitung

HMS

HMS Anybus Communicator CAN PROFINET IRT 2.32 Bedienungsanleitung

HMS

HMS Anybus-S Interbus Bedienungsanleitung

HMS

HMS Anybus X-gateway CANopen Bedienungsanleitung

HMS

HMS Intesis KNX - Hisense VRF Bedienungsanleitung

HMS

HMS AB9008 Bedienungsanleitung

HMS

HMS Ixxat CAN@net NT 420 Bedienungsanleitung

HMS

HMS AnyBus-X AB7607 Bedienungsanleitung

HMS

HMS Anybus X-gateway Bedienungsanleitung

HMS

HMS Intesis KNX Series Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung

RTA

RTA 460MCBC-N2E Technisches Datenblatt