Honeywell MIWI350 Bedienungsanleitung

• Internal or External Mounted Display

•Optional Backup Battery for Uninterrupted EVC Functionality

Solar Power with rechargeable Sealed Lead-Acid Battery (Refer to FD-612)

Battery - Alkaline Packs (Dual/Quad) (Refer to FD-613)

Modem Power Control through Power Distribution Board

Available in UMB (Universal Mounting Bracket), Wall, Pipe, and Portable mounting options

Compatible with MasterLink and PowerSpring software

CSA C/US Class 1, Division 2, Group C & D certiﬁcation

An integrated electronic cellular modem

Close the door of the MIWI350 device properly

Check the lock and latchet, and lock the MIWI350 device properly

Check the padlock properly while locking the MIWI350 device

Lock the battery mount bracket ﬂip cover properly after mounting the battery

MIWI350 complies with the general safety standards and regulations. However, failure to operate this

product as per the safety instructions available in this document may lead to hazards.

It is approved for use in hazardous areas Class I, Division 2. Different versions of MIWI350 are available

depending on the operating temperature conditions. The permitted operating conditions are marked on

each product. Check the operating condition limits of MIWI350 before installing. You must be familiar and

comply with the currently applicable electrical installation standards and regulations before installing and

operating MIWI350 in hazardous areas.

Denotes an explosion hazard. Ensure you follow all instructions described in the warning

notiﬁcation.

The caution warns you of possible damage to property and provides instructions to avoid

damage to MIWI350.

For more information on MIWI350 user manual, refer FD-610.

An integrated Electronic Volume Corrector or Electronic Recorder (using

electronics from the Honeywell EC350/ERX350)

The MIWI350 typically device includes:

The MIWI350 is the latest offering in the Honeywell's EVC Product Line. This

product line provides a more competitive, reliable, and easy to use solution.

It provides a comprehensive selection of communication hardware and power

supply systems optimized to integrate with the Mercury Instruments precision

measurement instrumentation. It also includes software for Remote Monitoring

and Data Acquisition (RMADA), including alarm handling and notiﬁcation.

•Pressure Expansion (PE) Board for Third Pressure, P3

Power or Communications Box (Refer to FD-614)

Install the MIWI350 device using

one of the following mounting

options:

Lead-Acid Battery Pack

Internal/External Display Cable gland location for

Pulse Output and

Pulse Input

Modem Pressure Transducers

P1, P2 and P3

Latch and Lock

Case Assembly

AC-DC Adaptor

Solar Charge ControllerDoor Assembly

Terminal block to connect to

external incoming power

P3 P2 P1

Pressure Expansion

(PE) Board

P1 Pressure

Transducer

Temperature

Probe

Ground/Earthing

Power Input

P2 Pressure

Transducer

Pulse Input

Pulse Output

P3 Pressure

Transducer

Lorem ipsum

After you receive the MIWI350 device:

Remove the contents from the box and the mounting kit bag.

2. Check the shipment against the invoice to ensure that the components ordered are installed in

MIWI350.

Report any shortage or shipping damages to your nearest Honeywell Account Manager.

Remote Antenna

(Optional)

Case Connector

(Optional)

Close the door of the device

properly. Also, check the

padlock, latchet and lock

the device.

Release the door latches of the

device one at a time, and open

the door of the device

Install the temperature probe to the

pipeline and tighten the nut to avoid

leakage (if applicable)

Route the external power cable*

through the gland and connect

to power terminal block

04 05

Route the pulse

input/output

cables through

the glands

(if applicable)

* It is required to use a UL/CSA approved cable

with working voltage spec of min 300V. Cable

shall be protected with an outer sheath.

For a fresh Lead-Acid Battery, the No Load Voltage is expected to be between 12.5–13.5VDC.

: Please perform the No Load Battery Voltage measurement in an area rendered Non Hazardous.

Please exercise caution to ensure the Battery Terminals do not come in contact with any other

metal objects during the measurement/handling.

Conﬁgure modem/EC/ERX350/HMI settings

(For more information, refer MIWI350 Installation and Operational Manual FD-610)

Quarter turn the screw and open

the battery mount bracket ﬂip

cover (CCW)

Insert the battery in the mount

bracket carefully

Connect the battery pack cable#

to battery charge controller cable Close the battery mount bracket ﬂip

cover and turn back the screw (CW)

# 40-6169-3 - If you are connecting a 12V 7Ah lead-acid battery

# 40-6169-2 - If you are connecting a 12V 21Ah lead-acid battery

CAUTION :

7 AH BATTERY WITH 120V AC/15V DC ADJUSTABLE POWER SUPPLY 21 AH BATTERY WITH 120V AC/15V DC ADJUSTABLE POWER SUPPLY

EXTERNAL DC POWER WITH BATTERY BACK UP EXTERNAL DC POWER WITHOUT BATTERY BACK UP

40-6186

40-6169-4

40-6169-2

40-2342-1

DISCONNECT THESE CONNECTORS BEFORE

CONNECTING FEMALE TERMINALS

(40-6192-3) TO BATTERY

40- 6169-3

40-2342-1

40-6186

40- 6169-4

40-6169-2

40-6163-2

FIX THE TERMINAL

BLOCK AT NEAR SIDE

OF ENCLOSURE

40-6163-2

40-6045

To learn more about

Honeywell’s Smart Gas Metering Solutions, visit:

FD-611 | Rev A | April 2020

www.honeywellprocess.com or contact your

Honeywell Process Solutions representative.

1280 Kemper Meadow Drive Cincinnati,

OH 45240

855-2511-7065 - United States & Canada

302-669-4253 - Outside the United States

MI-TAC-Support@Honeywell.com

Andere Handbücher für MIWI350

Andere Honeywell Controller Handbücher

Honeywell

Honeywell T2798I2000 Bedienungsanleitung

Honeywell

Honeywell ML7425A Series Bedienungsanleitung

Honeywell

Honeywell R4560 Bedienungsanleitung

Honeywell

Honeywell R7284B Bedienungsanleitung

Honeywell

Honeywell S05 Series Bedienungsanleitung

Honeywell

Honeywell DCP301 Bedienungsanleitung

Honeywell

Honeywell PCR-310 Bedienungsanleitung

Honeywell

Honeywell MN7220 Bedienungsanleitung

Honeywell

Honeywell V4055A Bedienungsanleitung

Honeywell

Honeywell Excel 10 Bedienungsanleitung

Honeywell

Honeywell T775R 2000 Series Bedienungsanleitung

Honeywell

Honeywell LYNX Touch L5200 Series Bedienungsanleitung

Honeywell

Honeywell WEB-VA00IB24NM Bedienungsanleitung

Honeywell

Honeywell CD3000M-3PH Bedienungsanleitung

Honeywell

Honeywell HCE 60 Betriebsanleitung

Honeywell

Honeywell HUPF Series Bedienungsanleitung

Honeywell

Honeywell MP953A Bedienungsanleitung

Honeywell

Honeywell MS4120F Bedienungsanleitung

Honeywell

Honeywell V9055A Bedienungsanleitung

Honeywell

Honeywell Spyder PUB6438S Bedienungsanleitung

Honeywell

Honeywell S05 Series Bedienungsanleitung

Honeywell

Honeywell SDW 30 Bedienungsanleitung

Honeywell

Honeywell ML7420A6025 Bedienungsanleitung

Honeywell

Honeywell ALERTON VIP-363-HOA Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch