Honeywell HTRAM-V1-W Bedienungsanleitung

TRANSMISSION RISK

AIR MONITOR

USER

MANUAL

PACKING LIST

Standard package includes

Honeywell Transmission Risk Air Monitor (HTRAM) device X1

User Manual X1 USB cable X1

USER MANUAL FOR THE

HONEYWELL TRANSMISSION RISK AIR MONITOR

ADDITIONAL ACCESSORIES AVAILABLE

• AC adapter: HTRAM-AD-USC (USC version),

or HTRAM-AD-EU (EU version) or HTRAM-AD-UK (UK version)

• Wall mount kit (separate instructions provided in kit)

OPERATION

1. HTRAM is a desktop or wall-mounted device. We recommend

to keep it plugged-in so it’s powered by the external USB

charger. There is a rechargeable battery inside that will

supply power for up to 10 hours, but we recommend

keeping the device plugged-in to conserve battery life.

2. Device On/Off: When the device in OFF status, push and hold

button for 3 seconds to turn it on. The device will show information

on the screen. After the initial process (approximately 1 minute),

the device enters normal status and displays readings. When

the device is in ON status, push and hold top button for 3

seconds to turn it OFF.

USER INTERFACE

400

Low/Medium/High

CO₂

PPM

SYMBOL FUNCTION

Bluetooth™ icon

Battery capacity level

USB power input, icon will show on screen

CO2 concentration reading

Risk level based on multiple factors such as

CO2, Temp, %RH and activity level etc.

Power

button

Status LEDs

LCD screen Power

input port

54%RH

18 C

Low Activity Setting

Medium Activity Setting

High Activity Setting

Custom Setting

Temperature reading, °C or °F

Humidity reading

For the ﬁrst use/power on, the device will

initially show “- -” for approximately 1 minute

QUICK START GUIDE

• Make sure these components were in the box. If any are missing,

please contact the company from which you purchased

the device as soon as possible:

Step 1. Make sure you have everything, then charge the

device.

Air Monitor USB Cable User Manual

• Connect the microUSB end to the device, and the USB connector 3

• Remove the protective ﬁlm from the monitor display.

• Turn on the Honeywell Transmission Risk Air Monitor by pressing

and holding the “Start” button on the top for ﬁve seconds.

• Use a smartphone to download the Honeywell air monitor

app (App name: Transmission Risk AirMonitor). You can

download directly from the Apple™ or Google™ stores, or by

scanning the appropriate QR code shown below if your phone

has a scanning app or embedded capability.

• Launch the app. Then, complete the connection and setup

by following the Bluetooth pairing process in this document.

to a power adapter or computer. Keep plugged-in until fully charged.

• Make sure the working environment is supported by

Bluetooth™ and wireless with Internet access, and a

user-supplied smartphone using Apple iOS or Android™.

Step 2. Power up the device, download the app and

complete the setup:

R R

HOW TO REGISTER

1. Launch the mobile app, and click the“REGISTER” button

and agree to the “Honeywell Data Privacy” notice.

2. Enter your email address and choose the region you

are located in, then click to send the veriﬁcation code.

3. Check your email for the veriﬁcation code and enter it on

the mobile app to ﬁnish the veriﬁcation process.

4. Provide your ﬁrst name and last name, create your

password and complete the self-registration process.

5. Go back to the main screen to login to the mobile app.

For individual users with less than 10 devices, we

recommend going through the self-registration process

via the mobile application.

For enterprise users with more than 10 devices, we

recommend going through the enterprise registration

process via web portal.

1. For North American enterprise users, please go to

https://airmonitoring.honeywell.com;

for EU enterprise users, please go to

https://airmonitoring.eu.honeywell.com

2. Click the “REGISTER” button, and agree to the “Honeywell

Data Privacy” notice.

3. Enter the sales order number and click “VERIFY ACCOUNT”

to validate purchase of your devices.

4. Enter your email address and click to send the veriﬁcation

code.

5. Check your email for the veriﬁcation code and enter it

on the web portal, then click “NEXT”.

6. Enter the required organization information.

7. Enter the Organization Administrator information and

then click “SUBMIT” to ﬁnish the registration process.

1. Open the App and enable mobile Bluetooth® in the device’s

Settings/Bluetooth.

HOW TO PAIR YOUR DEVICE

2. On the App, click the +Add New icon to add an air

monitor device.

3. Click the Connect icon to pair with the device, the Bluetooth

icon will blink.

4. Conﬁrm the device is ready for pairing: See the icon

blinking. Ensure the device's Bluetooth icon is blinking

on the screen.

5. The app will pop up a window and request the user to

input the PIN CODE shown on the device's screen.

6. If two or more devices' Bluetooth are activated, you can

use the serial number to identify which device is to be

paired. The serial number can be found on the back

side of the device.

7. Input the 6-digit PIN CODE. Then, click Connect.

8. When the Bluetooth icon on the device's screen stops

blinking, pairing is complete.

9. If you are individual user and want to connect the device

via home or open network WI Fi®, please enter the WIFI®

name and password to conﬁgure the device network.

10. If you are an enterprise user and your organization has

secured WIFI® network, please reach out to your

organization's IT personnel to conﬁgure the WIFl®

settings for the device network.

Monitors should be placed in the center of activity areas

and should be close to breathing height (approximately

1.5 m, depending on the height or age of the room’s

occupants), out of direct sunlight, and not directly

located near induction units, ﬂoor fans, or heaters.

In an organizational setting, e.g. schools, restaurants,

we recommend physically protecting the device by

placing a lock on the device enclosure and enabling

only authenticated access to the secure devices. Ensure

that only authorized personnel have the required keys to

physically access the devices.

2. On the App, click the +Add New icon to add an air

monitor device.

3. Click the Connect icon to pair with the device, the Bluetooth

icon will blink.

4. Conﬁrm the device is ready for pairing: See the icon

blinking. Ensure the device's Bluetooth icon is blinking

on the screen.

5. The app will pop up a window and request the user to

input the PIN CODE shown on the device's screen.

6. If two or more devices' Bluetooth are activated, you can

use the serial number to identify which device is to be

paired. The serial number can be found on the back

side of the device.

7. Input the 6-digit PIN CODE. Then, click Connect.

8. When the Bluetooth icon on the device's screen stops

blinking, pairing is complete.

9. If you are individual user and want to connect the device

via home or open network WI Fi®, please enter the WIFI®

name and password to conﬁgure the device network.

10. If you are an enterprise user and your organization has

secured WIFI® network, please reach out to your

organization's IT personnel to conﬁgure the WIFl®

settings for the device network.

DEVICE INDICATION AND RECOMMENDED ACTIONS

GREEN YELLOW RED

DEVICE INDICATION ¹

<800ppm

0.043%

infection risk

800ppm

0.043%

infection risk

1100ppm

0.051%

infection risk

Low Activity

Setting² ³

<500ppm

7.32%

infection risk

The end user can also choose custom settings on the device to

set the alarm threshold levels based on the user’s parameters

and local, regional and state requirements. Note: If Custom Settings

are used, the user is solely responsible for validating that those

alarm settings meet their speciﬁc requirements.

500ppm

7.32%

infection risk

800ppm

25.25%

infection risk

High Activity

Setting² ⁵

Custom

Setting

700ppm

3.40%

infection risk

1000ppm

5.41%

infection risk

Medium

Activity

Setting² ⁴

<700ppm

3.40%

infection risk

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Messgerät Handbücher

Honeywell

Honeywell W8710A Bedienungsanleitung

Honeywell

Honeywell Enraf 854 ATG Bedienungsanleitung

Honeywell

Honeywell TC809EA1035 Bedienungsanleitung

Honeywell

Honeywell HEN04112 Bedienungsanleitung

Honeywell

Honeywell Bendix/King KN 63 Bedienungsanleitung

Honeywell

Honeywell EWA600C-RF55C Bedienungsanleitung

Honeywell

Honeywell VERSAFLOW VORTEX 200 Bedienungsanleitung

Honeywell

Honeywell RABO G65 Bedienungsanleitung

Honeywell

Honeywell Q209E Modutrol IV Bedienungsanleitung

Honeywell

Honeywell Envitec MySignO Bedienungsanleitung

Honeywell

Honeywell SM-RI-X Bedienungsanleitung

Honeywell

Honeywell HAQ Series Installationsanleitung

Honeywell

Honeywell PHD6 Bedienungsanleitung

Honeywell

Honeywell 04973 Series Handbuch

Honeywell

Honeywell EW44*A Series Handbuch

Honeywell

Honeywell C7355B Bedienungsanleitung

Honeywell

Honeywell enCore FC Series Bedienungsanleitung

Honeywell

Honeywell MicroMAX Pro Betriebsanleitung

Honeywell

Honeywell themis plus EI3 Bedienungsanleitung

Honeywell

Honeywell 854 ATG Series Bedienungsanleitung

Honeywell

Honeywell Limitless WPMM Series Bedienungsanleitung

Honeywell

Honeywell EK205 Bedienungsanleitung

Honeywell

Honeywell BendixKing KLR 10 Bedienungsanleitung

Honeywell

Honeywell APT4000PH Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung