Honeywell MiniRAE 3000+ Bedienungsanleitung

Handheld PID Monitors

CONTENTS

Chapter 1 - Introduction 7

Product registration 7

Standards and certifications 7

Safety 9

Read before operating 10

Proper Product Disposal At End Of Life 11

Standard package contents 14

Chapter 2 - General information 15

Key features 15

Physical description 16

Chapter 3 - Charging the battery 17

Charging a spare rechargeable battery 19

Replacing rechargeable Li-Ion battery 19

Low voltage warning 19

Clock battery 20

Data protection while power is off 20

Alkaline battery pack 20

Chapter 4 - Basic operation 21

Turning the instrument on 21

Turning the instrument off 21

Chapter 5 - User interface 22

Display 24

Icons 26

Chapter 6 - Operating the instrument 27

Turning the instrument on 27

Turning the instrument off 27

Auto-zero at startup 28

Operating the built-in flashlight 28

Handheld PID Monitors 2 User Manual

Pump status 29

Calibration status 29

Bump status 30

Glance mode 30

Enter glance mode 30

Glance mode screens 31

Exit glance mode 31

Reverse direction navigation 32

Policy enforcement 32

Setting policy enforcement 33

Chapter 7 - Operating modes 36

MiniRAE 3000+ & ppbRAE 3000+ 36

Basic user level/hygiene mode 37

UltraRAE 3000+ 38

Chapter 8 - UltraRAE 3000+ operation 40

Compound-specific measurement 40

Measurement phases 40

Performing a measurement 40

Separation tube preparation 42

Inserting the separation tube 43

Measuring 44

Chapter 9 - VOC operation - UltraRAE3000+ 47

Basic user level/hygiene mode (Default settings) 47

Basic operation – MiniRAE 3000+ 48

Chapter 10 - Alarm signals 49

Alarm signal summary 49

Preset alarm limits & calibration 50

Testing the alarm 50

Integrated sampling pump 51

Backlight 51

Handheld PID Monitors 3 User Manual

Datalogging 51

Datalogging event 51

Datalogging sample 51

Auto/manual/snapshot datalogging 52

Chapter 11 - Standard kit & accessories 53

Accessories 53

AC adapter (battery charger) 55

Alkaline battery adapter 56

External filter 57

Optional accessories 58

Calibration adapter 58

Calibration regulator 58

Organic vapor zeroing kit 58

AutoRAE 2 automatic test & calibration system 58

Chapter 12 - Calibration 59

Standard two-point calibration 59

Entering calibration 60

Zero (Fresh Air) Calibration 61

Span calibration 62

Exiting two-point calibration in basic user level 63

Three-point calibration 64

Span 2 calibration 65

Exiting three-point calibration 66

Chapter 14 - Bump test 67

Chapter 15 - Programming mode 68

Entering programming mode 69

Programming mode menus 71

Exiting programming mode 72

Navigating programming mode menus 72

Reverse direction – menu selection 73

Calibration 73

Measurement 75

Handheld PID Monitors 4 User Manual

Datalog 82

Monitor setup 85

Chapter 16 - Hygene mode 93

Basic user level & hygiene mode 93

Entering search mode from hygiene mode 94

Chapter 17 - Advanced user level 95

Advanced user level & hygiene mode 95

Basic user level & search mode 96

Advanced user level & search mode 97

Chapter 18 - Diagnostic mode 98

Entering diagnostic mode 98

Adjusting the pump stall threshold 99

Testing the humidity sensor 100

Exiting diagnostic mode 101

Chapter 19 - Transferring data 102

Downloading the datalog to a PC 102

Uploading firmware to the instrument from a PC 103

Chapter 20 - Maintenance 104

Battery charging & replacement 104

Replacing the Li-ion battery 105

Replacing the alkaline battery adapter 106

PID sensor & lamp cleaning/replacement 107

Cleaning the PID sensor 110

Cleaning the lamp housing or changing the lamp 110

Determining the lamp type 111

Sampling pump 112

Cleaning the instrument 112

Special servicing note 112

Chapter 21 - Specifications 113

MiniRAE Lite+ specifications 113

Handheld PID Monitors 5 User Manual

MiniRAE 3000+ specifications 115

ppbRAE 3000+ specifications 118

UltraRAE 3000+ specifications 121

Chapter 22 - Troubleshooting 124

Handheld PID Monitors 6 User Manual

CHAPTER

1INTRODUCTION

Product registration

https://sps.honeywell.com/us/en/support/safety/hgas-product-registration

By registering your product, you can:

lReceive notification of product upgrades or enhancements

lBe alerted to Training classes in your area

lTake advantage of Honeywell special offers and promotions

Standards and certifications

Intrinsic Safety

US and Canada: Class I, Division 1, Groups A,B,C,D

ATEX 2460 II 2G Ex ia IIC T4 Gb

Ex ia IIB T4 Gb

Sira 17ATEX2082X

IECEx CSA 10.0005X Ex ia IIC T4 Gb

Ex ia IIB T4 Gb

EX ia IIC T4 Gb (with bat pack 059-3051-000)

EX ia IIB T4 Gb (with bat pack 059-3052-000)

CSAE 21UKEX2051X

Temperature: -20º C to 50º C (-4º to 122º F)

Humidity: 0% to 95% relative humidity (non-condensing)

Handheld PID Monitors 7 User Manual

FCC Information

Contains FCC ID: SU3RMBLEB or SU3RM900 or SU3RMWIFIC or SU3RMLORAB, depends on

what radio is assembled

The enclosed device complies with part 15 of the FCC rules. Operation is subject to the

following conditions: (1) This device may not cause harmful interference, and (2) This device

must accept any interference received, including interference that may cause undesired

operation.

Wireless Approval For UAE In Middle East

TRA REGISTERED No: ER36153/14 or ER36153/15

DEALER No.: HONEYWELL INTERNATIONAL MIDDLE EAST – LTD – DUBAI BR

Wireless Approval For QATAR In Middle East

ictQATAR

Type Approval Reg. No.: R-4466 or R-4635

Handheld PID Monitors 8 User Manual

Safety

WARNING

This Manual must be carefully read by all individuals who have or will have the

responsibility of using, maintaining, or servicing this product. The product will

perform as designed only if it is used, maintained, and serviced in accordance with

the manufacturer’s instructions. The user should understand how to set the correct

parameters and interpret the obtained results.

For safety reasons, this equipment must be operated and serviced by qualified

personnel only. Read and understand the instruction manual completely before

operating or servicing.

AVERTISSEMENT

Pour des raisons de sécurité, cet équipment doit être utilisé, entretenu et réparé

uniquement par un personnel qualifié. Étudier le manuel d’instructions en entier

avant d’utiliser, d’entretenir ou de réparer l’équipement.

Handheld PID Monitors 9 User Manual

Read before operating

This manual must be carefully read by all individuals who have or will have the responsibility of

using, maintaining, or servicing this product. The product will perform as designed only if it is

used, maintained, and serviced in accordance with the manufacturer’s instructions. The user

should understand how to set the correct parameters and interpret the obtained results.

CAUTION

To reduce the risk of electric shock, turn the power off before opening this instrument

or performing service. Never operate the instrument when the instrument is open.

Service this product only in an area known to be non-hazardous.

WARNING

ATEX: To reduce the risk of electrostatic ignition, do not use the instrument without

the rubber boot in place.

STATIC HAZARD: Clean only with a damp cloth.

For safety reasons, this equipment must be operated and serviced by qualified

personnel only. Read and understand instruction manual completely before operating

or servicing.

USE ONLY RAE SYSTEMS BYHONEYWELL BATTERY PACKS, PART NUMBERS 059-

3051-000, 059-3052-000, AND 059-3054-000. THIS INSTRUMENT HAS NOT BEEN

TESTED IN AN EXPLOSIVE GAS/AIR ATMOSPHERE HAVING AN OXYGEN

CONCENTRATION GREATER THAN 21%. SUBSTITUTION OF COMPONENTS MAY

IMPAIR INTRINSIC SAFETY. RECHARGE BATTERIES ONLY IN NON-HAZARDOUS

LOCATIONS.

DO NOT MIX OLD AND NEW BATTERIES OR BATTERIES FROM DIFFERENT

MANUFACTURERS.

THE CALIBRATION OF ALL NEWLY PURCHASED HONEYWELL INSTRUMENTS

SHOULD BE TESTED BY EXPOSING THE SENSOR(S) TO KNOWN CONCENTRATION

CALIBRATION GAS BEFORE THE INSTRUMENT IS PUT INTO SERVICE.

FOR MAXIMUM SAFETY, THE ACCURACY OF THE INSTRUMENT SHOULD BE

CHECKED BY EXPOSING IT TO A KNOWN CONCENTRATION CALIBRATION GAS

BEFORE EACH DAY’S USE.

DO NOT USE USB/PC COMMUNICATION IN HAZARDOUS LOCATIONS.

Handheld PID Monitors 10 User Manual

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Messgerät Handbücher

Honeywell

Honeywell UDA2182 Bedienungsanleitung

Honeywell

Honeywell 3400 Bedienungsanleitung

Honeywell

Honeywell RABO G65 Bedienungsanleitung

Honeywell

Honeywell CM4 Bedienungsanleitung

Honeywell

Honeywell C7355A1050 Bedienungsanleitung

Honeywell

Honeywell SLN 700 Bedienungsanleitung

Honeywell

Honeywell E3Point Bedienungsanleitung

Honeywell

Honeywell RABO Bedienungsanleitung

Honeywell

Honeywell Chadwick-Helmuth 8500C Bedienungsanleitung

Honeywell

Honeywell EK205 Bedienungsanleitung

Honeywell

Honeywell Q340A Bedienungsanleitung

Honeywell

Honeywell LeaderLine DPR 100 C Bedienungsanleitung

Honeywell

Honeywell NOTIFIER UDS-3 Verdrahtungsschema

Honeywell

Honeywell DVC100 (M) MK2 Bedienungsanleitung

Honeywell

Honeywell Green Class meter Bedienungsanleitung

Honeywell

Honeywell SEARCHLINE EXCEL PLUS Bedienungsanleitung

Honeywell

Honeywell HERMetic UTImeter Gtex Chem IIC Bedienungsanleitung

Honeywell

Honeywell HEN04112 Bedienungsanleitung

Honeywell

Honeywell HomMed Genesis Touch Bedienungsanleitung

Honeywell

Honeywell SmartLine RMA800 Bedienungsanleitung

Honeywell

Honeywell RMA 3000 Bedienungsanleitung

Honeywell

Honeywell TC809EA1035 Bedienungsanleitung

Honeywell

Honeywell MagneW 3000 Plus Benutzerhandbuch

Honeywell

Honeywell DR 4300 Leitfaden

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung