Honeywell 5103S-5107S Anleitung zur Verwendung

Models 5103S-5107S / 5103-5108 / 5112DOJ / 5112-5113 /

5103GS-5107GS / 5103G-5108G / 5112G-DOJ / 5112G-5113G

Read this manual carefully and never store it inside the safe!

ENGLISH

Operation & Installation Guide

Steel Security Safe

with Programmable Digital Lock

Welcome / Package Contents .........................................................................Page 1

Override Access Key / Install Batteries...........................................................Page 2

Locking Safe / Unlocking Safe.........................................................................Page 3

Entering The Wrong Code / Secure Lockout Period /

If You Forget Your Passcode............................................................................Page 4

Replacing Batteries / Care and Maintenance / Removable Shelf................Page 5

Anchoring Your Safe.........................................................................................Page 6

Consumer Assistance..............................................................................Page 7

Ordering Additional Keys / Safe Identiﬁcation Record..............................Page 8

Notes.......................................................................................................Page 9

Warranty Information...............................................................................Back Cover

For Your Protection

• Do not remove the Serial Number tag from the safe.

• Never Store Override Access Keys inside safe.

• Record all Safe Identication Numbers on Safe Identication Record (page 8).

• Save this manual and NEVER keep it inside the safe.

Index

The following list outlines the items and quantities of each included with your new safe. Please

carefully check the list to conﬁrm all items have been received. If any item is missing, please contact

Consumer Assistance (See page 7 for contact information).

Operation Manual (1 ea.)

Override Access Keys (2 ea.)

“AA” Batteries (4 ea.)

Mounting Hardware (1 set)

Your Honeywell Steel Security Safe will provide years of safe and secure protection for your valuables,

important documents and other personal items. All Honeywell safes are designed and built using the

highest manufacturing standards to ensure maximum user satisfaction under a variety of conditions.

With proper care, your Honeywell safe will provide “Peace of Mind” for many years to come.

Thank you and enjoy!

Attention: DO NOT RETURN SAFE TO STORE

If you are missing parts or have difﬁculty operating your safe, please contact our Consumer Assistance

Department by telephone. Store will not accept returned products without prior authorization. You must

ﬁrst contact our consumer assistance department. (See page 7 for contact information)

WELCOME

PACKAGE CONTENTS

ABC

DEF

JKL

GHI

PRS

CLEAR

LOCK

TUV

OPER

WXY

MNO

For your convenience, we have included 4 “AA” batteries that provide the power for the electronic

locking system. These batteries must be installed before using your safe. The battery compartment is

located inside the safe on the lock cover panel.

1. Remove battery compartment cover on inside door (Figure 1).

2. Insert 4 “AA” batteries (included). Ensure the batteries are installed in the correct direction, with

regard to polarity (+ and -) (Figure 2).

3. Replace the battery cover (Figure 3).

4. Proceed to the “Locking Safe” section on next page.

INSTALL BATTERIES

OVERRIDE ACCESS KEY

Your safe is equipped with an override access key which allows immediate access in case you forget

your user codes or the batteries need to be installed or replaced. There are 2 versions of this safe,

one in which the key turns to the left and another in which the key turns to the right.

1. Remove override key cover with small screwdriver (Figure 1).

2. Insert override key and turn left (or right for some versions) to unlock safe (Figure 2).

3. Pull door open using handle located at the bottom of the keypad (Figure 3).

4. Remove override access key and store it in a safe place away from the safe. Replace the

cover over the key lock and proceed to “Install Batteries” (Figure 4).

ABC

DEF

JKL

LOCK

TUV

OPER

WXY

MNO

ABC

DEF

JKL

LOCK

TUV

OPER

WXY

MNO

ABC

DEF

JKL

GHI

PRS

CLEAR

LOCK

TUV

OPER

WXY

MNO

ABC

DEF

JKL

GHI

PRS

CLEAR

LOCK

TUV

OPER

WXY

MNO

Figure 1

Figure 2

Figure 3

Figure 4

1. To open safe enter the new pass code that was used to lock the safe in Step 1 of the

“LOCKING SAFE” section above (Figure 1).

2. Immediately after entering the code, press the “LOCK” key (Figure 2).

3. Lock bolts should receed into the unlocked position (Figure 3).

4. The LED will display and you can then pull door open using the handle located at the

bottom of the keypad (Figure 4).

NOTE: You can relock the safe by entering any 3-6 digit Pass Code followed by the “LOCK” key

The lock design allows for a new user code each time that the safe is locked

1. Enter any 3-6 digit Pass Code, for example “1”-“5”–“9” (Figure 1).

2. Immediately after entering the code, press the “LOCK” key (Figure 2).

3. Lock bolts should extend into the locked position (Figure 3).

4. The LED will display for 3 seconds followed by the active code entered as a reminder.

(Figure 4 & 5).

PRIVACY MODE: To prevent the LED displaying the pass code entered, press “CLEAR” prior to

entering a code.

LOCK SOUND: To turn “beep” sound On or Off, press the “CLEAR” button twice.

LOCKING SAFE

UNLOCKING SAFE

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

ABC

DEF

JKL

GHI

PRS

CLEAR

LOCK

TUV

OPER

WXY

MNO

If you forget your passcode AND your key turns to the RIGHT:

1. Insert Override Key and turn to the right to unlock the safe.

2. With the key in the open position, press the “CLEAR” button and the LED will display .

3. Turn the Override Key to the left and remove it from lock.

4. The safe will be unlocked after entering any 3-6 digit code followed by pressing the

“LOCK” button.

5. The safe is returned to normal operation. You may enter any new 3-6 digit code followed by

pressing the “LOCK” button.

If you forget your passcode AND your key turns to the LEFT:

1. Screen must be blank. Wait 30 seconds after pressing any key.

2. Insert Override Key and turn to the left to unlock the safe.

3. With the key in the open position, press the “CLEAR” button and the LED will display .

4. Turn the Override Key to the right and remove it from lock.

5. The safe will be unlocked after entering any 3-6 digit code followed by pressing the

“CLEAR” button.

6. The safe is returned to normal operation. You may enter any new 3-6 digit code followed by

pressing the “LOCK” button.

IF YOU FORGET YOUR PASSCODE

SECURE LOCKOUT PERIOD

If a wrong code is entered 3 times in a row, the digital keypad will

begin a ve-minute lockout period. During this period the LED will

display and the keypad will become disabled. Once the

lockout period has expired, the safe can be unlocked using the

active code.

NOTE:

You may use the Override Access Key to open safe, but keypad

will complete the full lockout period.

ENTERING THE WRONG CODE

ABC

DEF

JKL

GHI

TUV

WXY

MNO

Figure 1 Figure 2

1. If you press a wrong key while entering your code, you may press “CLEAR” to reset prior

to pressing “LOCK” (Figure 1).

2. If you have entered the wrong code followed by “LOCK”, the LED panel will display

(Figure 2).

ABC

DEF

JKL

GHI

TUV

WXY

MNO

REMOVABLE SHELF

Models 5103S, 5103, 5104, 5107S, 5107, 5108, 5112DOJ, 5113

5103GS, 5103G, 5104G, 5107GS, 5107G, 5108G, 5112GDOJ, 5113G

If your safe is equipped with a removable shelf, it can easily be removed to accommodate the storage

of taller or larger items.

1. Empty shelf of all contents and remove any carpeting

2. Remove by lifting and tilting to side to ﬁt through door opening.

DO NOT discard shelf. It is recommended that you keep it for future needs.

CARE AND MAINTENANCE

When properly maintained, your safe will continue to operate for many years. In order to ensure

optimum performance of your safe, please follow these simple precautions:

CLEAN HANDS - Never attempt to operate the digital keypad if your hands have excessive dirt, debris

or liquids on them.

CLEAN SAFE – To clean the surface of your safe, it is recommended that you use a mild cleaner (e.g.,

window cleaner) to avoid scratching or discoloring the surface. Always wipe dry and NEVER use

abrasive cleansers on the safe or digital keypad.

MOISTURE – We recommend that you place delicate items such as pictures or intricate jewelry into an

air-tight container before storing them in your safe. Avoid placing your safe in areas of high humidity.

For optimum performance, the safe should be opened and aired out for at least 20 minutes every two

weeks.

For future reference, store this Operation and Installation Guide in a secure area away from the safe.

DO NOT DISCARD!

REPLACING BATTERIES

You may check the battery power at any time by pressing the “LOCK” key just once. The LED display

will show one of the following messages:

:Battery power is good (Figure 1).

:Battery power is low and batteries should be replaced (Figure 2).

Weak or dead batteries should be replaced immediately and all 4 batteries should be changed.

It is NOT RECOMMENDED to use Non-alkaline or rechargeable batteries. Remember to always

remove the batteries from the safe if not using it for an extended period of time.

NOTE: The active code will not be erased if the batteries become weak or are removed.

ABC

DEF

JKL

GHI

PRS

TUV

WXY

MNO

ABC

DEF

JKL

GHI

PRS

TUV

WXY

MNO

Figure 1 Figure 2

You may bolt your safe to the wall or ﬂoor to added theft protection and resistance to tipping. Your

safe has pre-drilled bolt-down holes in the back panel and in the ﬂoor.

To secure your safe to the wall and/or ﬂoor:

1. Select a suitable and convenient location for your safe.

2. Empty the safe and remove the carpet.

3. Locate the predrilled holes on the inside of safe.

4. Place your safe in the desired location.

5. Line up the predrilled holes and mark the ﬂoor or wall through the holes (Figure 1).

NOTE: It is not recommended to attempt to bolt to both ﬂoor and wall.

6. Move the safe aside to clear marked spots for drilling.

7. Drill holes appropriate for hardware being used and the mounting surface (Figure 2).

INCLUDED: (2 each – bolts, washers and masonry anchors).

8. Place the safe back over the holes and install the fasteners as required (Figure 3).

9. Once completed, replace the carpet.

NOTE: Bolting/unbolting of the unit is at the consumer’s expense and discretion. LH Licensed

Products is not responsible for any costs incurred if the unit is to be replaced.

If you have any questions about mounting the safe, please check with your local home center/

hardware retailer or independent contractor.

ANCHORING YOUR SAFE

ABC

DEF

JKL

GHI

PRS

CLEAR

LOCK

TUV

OPER

WXY

MNO

Figure 1 Figure 2 Figure 3

EMAIL: [email protected]

WEBSITE: www.honeywellsafes.com

ADDRESS: Consumer Assistance Dept.

LH Licensed Products, Inc., 860 East Sandhill Avenue Carson, CA 90746 USA

TELEPHONE: US/Canada 1-877-354-5457 (Toll Free)

Mexico 01-800-288-2872 After English voice recording stops you must then enter 800-860-1677

to complete your call. (Toll Free)

Australia 0011-800-5325-7000 (Toll Free)

Germany/New Zealand 00-800-5325-7000 (Toll Free)

Other Countries XX*-310-323-5722 (Toll Charges Apply)

XX*- Dial U.S. Country Code ﬁrst

CALL CENTER HOURS: US/Canada 7am – 5pm (Paciﬁc**) Mon – Fri (Subject to change)

CALL BACK HOURS: Other Countries 7am – 8pm (Paciﬁc**) Mon – Fri (Subject to change)

Paciﬁc Time**- Local time in Los Angeles, CA, USA

* Insert correct Country Code

** Local Time based on Los Angeles California USA

INTERNATIONAL CALL BACK HOURS:

If you need to speak with a consumer assistant and cannot contact us during the Call

Center hours above, please send an email or leave a telephone message, including your Name,

Telephone Number and the best time for us to contact you during the Call Back hours above and we

will make our every effort to contact you and help answer any of your questions or concerns.

CONSUMER ASSISTANCE

The following information is required to order keys:

1. PROOF OF OWNERSHIP (1 of 2 Options Below)

A) SALES RECEIPT & IDENTIFICATION – INTERNATIONAL ORDERS ONLY!

  •CopyofsalesreceiptshowingStore,Date&ProductDescription.

  •CopyofyourpictureI.D.(Driverslicense,passport,regularI.D.).

B) PRODUCT OWNERSHIP VERIFICATION FORM

If sales receipt is not available, contact us by email or telephone to request a “Product

Ownership Veriﬁcation Form”.

2. ORDER INFORMATION

CONTACT

•Name&ShippingAddress

  •E-mailaddress(IfAvailable)

  •TelephoneNumber

  •BestTimetoContactYou

3. PLACING AN ORDER

  •Tobegintheorderprocess,contactusbytelephone,email,ormail

4. METHOD OF PAYMENT

  •Visa,MasterCard,CheckorMoneyOrder

NOTE: For pricing please contact Consumer Assistance. Contact information is located on the back

cover of this manual. Payment method and pricing subject to change.

Model Number:

Serial Number:

Override Access Key Number:

ORDERING ADDITIONAL OVERRIDE ACCESS KEYS

SAFE IDENTIFICATION RECORD

PRODUCT

•Model#

•Serial#

•LockKey#

•QuantityofKeysOrdered

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Andere Handbücher

Honeywell

Honeywell QRAE 3 Bedienungsanleitung

Honeywell

Honeywell RM7895A1014 Bedienungsanleitung

Honeywell

Honeywell POL-200-TS Bedienungsanleitung

Honeywell

Honeywell Titan SCBA Installationsanleitung

Honeywell

Honeywell EC7820A Bedienungsanleitung

Honeywell

Honeywell LonWorks Bedienungsanleitung

Honeywell

Honeywell IH21 Bedienungsanleitung

Honeywell

Honeywell EC7830A Series Bedienungsanleitung

Honeywell

Honeywell 2040W Kurzanleitung

Honeywell

Honeywell RA889A Bedienungsanleitung

Honeywell

Honeywell Sensepoint XCL Bedienungsanleitung

Honeywell

Honeywell BW Clip4 Bedienungsanleitung

Honeywell

Honeywell GasAlertQuattro Bedienungsanleitung

Honeywell

Honeywell 2201 Bedienungsanleitung

Honeywell

Honeywell IF2 Bedienungsanleitung

Honeywell

Honeywell LED310 Bedienungsanleitung

Honeywell

Honeywell HD3 equIP Series Bedienungsanleitung

Honeywell

Honeywell CD3000S-1PH Bedienungsanleitung

Honeywell

Honeywell r7284 Bedienungsanleitung

Honeywell

Honeywell Searchline Excel Bedienungsanleitung

Honeywell

Honeywell IH21 Bedienungsanleitung

Honeywell

Honeywell BW Clip4 Bedienungsanleitung

Honeywell

Honeywell 26480.10 Service-Handbuch

Honeywell

Honeywell Sensepoint XRL Bedienungsanleitung

Beliebte Andere Handbücher anderer Marken

GO Industries

GO Industries 38017 Bedienungsanleitung

Cissell

Cissell 30LBCMAN2 Bedienungsanleitung

RIDGID

RIDGID K-60SP Bedienungsanleitung

Gage Bilt

Gage Bilt GB751SH-5 Bedienungsanleitung

OVE

OVE SIERRA 60 Bedienungsanleitung

ReelCraft

ReelCraft 7800 OLB21 Bedienungsanleitung

Body Armor 4x4

Body Armor 4x4 ECO-SERIES Bedienungsanleitung

ROBLIN

ROBLIN DROP Benutzerhandbuch

EMG

EMG EMG-ACB BARREL Service-Handbuch

MiniSolar

MiniSolar MT-150 Bedienungsanleitung

Parkside

Parkside PSZ 250 B2 Bedienungsanleitung

ABB

ABB REM 610 Produkthandbuch

Parkside

Parkside 55992 Betriebsanleitung

Skyjacker

Skyjacker F250 Bedienungsanleitung

IBM

IBM IBM SYSTEM Z Installationsanleitung

Grech Motors

Grech Motors G28 Bedienungsanleitung

NOVAK

NOVAK BATTERY CARE SHEET Leitfaden

Telemotive

Telemotive blue PiraT Mini Benutzerhandbuch