Honeywell HPTV2408UL Technisches Handbuch

HPTV2408UL

Power Supply

PN 52288:B1 6/5/07 ECN 06-612

Honeywell

12 Clintonville Road

Northford, CT 06472

http://www.honeywellpower.com

Product Installation Document

1Overview

The Honeywell Power Products HPTV2408UL Power supply provides eight individually fused 24VAC outputs with a

total of 4 amperes.

2 Specifications

• UL/ULC Listed Power Supply

• Eight individually fused 24 VAC outputs

• AC Power and eight Individual Output Indicator LEDs

• LED Indicator Lights:

– Input Power LED (Green) – ON indicates incoming input voltage

– Output Power LEDs (Red) – ON indicates blown output fuse

•Fuses

– Incoming Safety Fuse Block, 3.15A, 250V

– Load Output Fuses (8), 1A, 250V

– Secondary Fuse, 4A, 250V

• AC cord and spare fuses included

• Power ON/OFF switch

• Dimensions: 9.25 in. x 8.25 in. x 3.5 in. (23.3 cm x 21 cm x 9 cm)

3 Installation Instructions

1. Pre-drill holes where HPTV2408UL enclosure is to be mounted.

If the included AC cord is used, mount the enclosure in a secure location where the unit cannot be accidentally

unplugged.

2. Secure HPTV2408UL enclosure to the desired location (indoor installation only) as shown in Figure 1.

3. Disconnect power to the branch circuit to which the HPTV2408UL will be connected.

4. Place SW1 to the OFF position.

5. Connect incoming AC (120 VAC, 60Hz) into the incoming fuse block input observing polarities (see Figure 2).

Connect ground leads as shown in diagram.

6. Connect CCTV cameras (or other external loads) to appropriate terminals (example output 1 = 1P, 1N). Route all

24V wiring at least 3/8in. (0.953 cm) from 120V mains wiring (indoor installations only).

7. Power the branch circuit and place SW1 to the ON position. The green LED should illuminate indicating 24V is

reaching the PCB.

NOTE:

– A readily accessible switched circuit breaker must be available to disconnect mains power as required.

– Do not expose to rain or moisture.

– Replace fuses with fuses of same type and rating.

– Refer servicing to qualified personnel.

NOTE: All 120V wiring should be routed so that it cannot touch 24V wiring to be installed later.

Continued on next page...

2HPTV2408UL Installation Instructions — P/N 52288:B1 6/5/07

8. The red LEDs illuminate only if a camera (load) is installed and the fuse is open. Remove a camera output fuse to

verify LED operation.

9. Secure the cabinet cover with metal screws to prevent access by unauthorized personnel.

Figure 1

Figure 2

For additional information:

• Visit our website: http://www.honeywellpower.com

• Contact Technical Support: (877) HPP-POWR

• Email us: hpp_techserv@honeywell.com

Wall

Mounting

Screws

(4)

(typ.)

Cabinet

HPTV2408UL-mount.wmf

HPTV2408UL.wmf

Inhaltsverzeichnis

Andere Honeywell Stromversorgung Handbücher

Honeywell

Honeywell HP600ULM Bedienungsanleitung

Honeywell

Honeywell HPF-PS6 Bedienungsanleitung

Honeywell

Honeywell HPL624 Technisches Handbuch

Honeywell

Honeywell HPTV2416UL Technisches Handbuch

Honeywell

Honeywell HPF24S8 Bedienungsanleitung

Honeywell

Honeywell HPR12DC416UL Technisches Handbuch

Honeywell

Honeywell PMB-AUX-RTO Technisches Handbuch

Honeywell

Honeywell PS-HL-138 BM Series Bedienungsanleitung

Honeywell

Honeywell PS1202C Bedienungsanleitung

Honeywell

Honeywell HPTV24-E Series Technisches Handbuch

Honeywell

Honeywell HP24100WP Technisches Handbuch

Honeywell

Honeywell HP1205UL-4 Technisches Handbuch

Honeywell

Honeywell PS1202A00 Bedienungsanleitung

Honeywell

Honeywell Notifier AMPS-24/E Bedienungsanleitung

Honeywell

Honeywell HP400ULM Technisches Handbuch

Honeywell

Honeywell HP312CX Bedienungsanleitung

Honeywell

Honeywell PRO-2200 Bedienungsanleitung

Honeywell

Honeywell 900P01 Gebrauchs- und Pflegehandbuch

Honeywell

Honeywell Fire-Lite FL-PS6 Bedienungsanleitung

Honeywell

Honeywell HPR2416CBUL Bedienungsanleitung

Honeywell

Honeywell Gamewell FCI GFPS-9 Bedienungsanleitung

Honeywell

Honeywell HLSPS25-XPH Bedienungsanleitung

Honeywell

Honeywell 9007AX01 Bedienungsanleitung

Honeywell

Honeywell VX89301PWRSPLY Bedienungsanleitung

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Bedienungsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung