Hoover 53425 Bedienungsanleitung

HOOVER@

Deluxe

Uprtght

Cleaner

Read this manual before

operating the cleaner

Owner’s Manual

ENGLISH

pp.l-14

ESPAflOL

p&g

15-22

FRANGAlS

-8

p. 23-29

This cleaner was inspected and packaged carefully before being shipped from the

factory.

If you should happen to need assistance during assembly or operation call

l-900-944-9200

for an automated referral of authorized service outlet

locations (U.S. only)

l-339499-9499 to speak with a representative in our Consumer

Response Center or

Visit us online at

www.hoover.com

to find the service outlet nearest you

(click on the “Service” button).

PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE

Fill in and retain

The model’and serial number are located on the bottom of the cleaner.

For your personal records,

please

enter the COMPLETE model and serial number

In the spaces provided and.retain this information.

Your cleaner is model

and has serial number

It is suggested that you attach your sales receipt to this owner’s manual.

Vertfication

of date of purchase may be required for warranty service of your

HOOVER product.

Save!

index

Assembling Cleaner

..........................

3-9

Cleaning Effectiveness

Per Amp Rating

......

..I

........................

How To Use

Cleaner Description

..........................

Cleaning Tools

f&g

................................

Upright Cleaner...”

.........................

lf You Have a Problem ...

..................

_‘;8

clearing

Blockages .....................

-13

Important Safeguards

..........................

Maintenance

Authorized Service....................... “.12

Lubrication

......................................

Replacing Belt

..................................

Replacing Brush Roll .....................

-11

Replacing Headlight....................... .10

Replacing Filter

Bag

...................

.9-l

Replacing Final

filter..

....................

Warrsnty .........*........ 13

............................

(I&)

1995, 1998 The Hoover Company

www.hoover.oom

Important

Safeguards

When using an electrical appliance, always follow

basic precautions, including the

following:

READ ALL

INSTRUCTIONS

BEFORE USING THIS APPLIANCE

Warning=

To reduce the risk of fire, electric shock, or injury:

Do not use outdoors or on wet surfaces.

Close suoervision is necessarv when anv

aodiance

is used bv or near children.

Do not allow vacuum cleaner

used&‘a’

toy or to run

u&tended

at any time.

Keep hair, loose clothing, fingers, feet and all parts of body away from openings,

rotating agitator and other moving parts. Do not operate cleaner in bare feet or

when wearing open toe shoes or sandals.

Do not pick up anything that is burning or smoking, such as cigarettes, matches, or

hot ashes.

Do not use to pick up flammable or combustible liquids such as gasoline or fine

wood sandings or use in areas where they may be present.

Avoid picking up hard, sharp objects with the cleaner. They may damage the cleaner

and the bag.

Do not use without dust bag or filters in place. Change bag frequently when picking

up very tine materials such as powder

Use extra care when cleaning on stairs.

Do not put any object into openings. Do not use with any opening blocked; keep

free of dust, lint, hair, or anything that may reduce air flow.

Do not pull or

cany

by cord, use cord as a handle, close door on cord or pull cord

around sharp edges or corners. Do not run appliance over cord. Keep cord away

from heated surfaces.

Always disconnect cord from electrical outlet

before

servicing the cleaner.

Unplug cleaner when not in use.

Turn

off all controls before unplugging.

Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Never

handle plug or appliance with wet hands.

The use of an extension cord is not recommended.

Do not use with damaged cord or plug.

appliance is not working as it should, has

been dropped, damaged, left outdoors, or dropped into water, take it to a Hoover

Factory

Servtce

Center or Authorized Hoover Warranty Service Dealer (Depot).

Use vacuum cleaner only for its intended use as described in the ihstructions.

Use only attachments recommended by The Hoover Company; others may cause

hazards.

Save these instructions!

it is extremely important to

read and follow all the

instruction steps in order.

The assembled cleaner will look like this drawing.

If you need assistance with any step of the assembly, call

I-800-944-9200

for an automated

referral of authorized service outlet

locations (U.S. only) or

l-330-499-9499 to speak with a

representative in our Consumer

Response Center or

Visit us online at

www.hoover.com

to find the

service outlet nearest you (click on the “Service” button).

This cleaner is intended for household use.

Side mounted hose trademark of The Hoover Company

Cart6n

contents

Remove all parts from carton and

identify each item shown.

Note that some of the items are

shipped together in the sealed

bag with the owner’s manual.

A. Upper handle

B. Lower handle

C. Cord

Bag compartment and tool

storage

E. Bracket

Extra belt (some models only)

G.Cleaner

base and hose

H. Handle bolt and nut packet

(One extra nut included)

Paper bag (some models

come with

bag, others

have additional bags.)

J. Cleaning tools and extension wand

’

Stats&

Assemble

Note:

The

white switch lock

above the ON/Off switch, aids

assembly

of your cleaner.

Assembly can be continued if the

switch lock is missing. However,

do not remove the switch lock

until assembly is completed.

Align upper handfe and lower

handle as shown.

B-

Place upper (C) and lower (D) handle parts on a fiat surface,

aligning rod sections

(6).

With hands on sides of parts, push

them together firmly until they “click” and rod sections lock

together.

*Be careful not to press against rod (B) extending from the

lower handle shown in Fig.-l-3. Do not push handle

together with hands on ends of handle parts.

Step 2

Attach

coril

With side marked “UP” visible, insert Rotate cord protector (E) on cord

large

rectangular end of cord into

until

,you

see its arrow

(F).

With arrow on cord protector (E)

pocket in bottom of

handk?. .pointing

toward arrow on upper

handle (G), press groove (H) in

Make sure rectangular end is

pushed down into the handle as far

cord protector into slot (I) in

upper handle.

as possible.

Slide cord protector (E) toward

upper handle.

Step 3 Attach handle

Press cord into place at each of the

three notches indicated. Note location of tapered rails (J) on

bracket (K) and on lower handle.

Do not plug cleaner in until

assembly is totally complete.

With

printed

side of bracket (K)

facing up, slide rails on bracket

onto rails (J) on lower handle

until

bracket snaps past

the lock tab (L).

I I

Pull bracket toward bottom of handle

slightly to make sure bracket is

locked in place.

Make sure hole in bracket aligns

with hole in handle.

With ON/OFF switch to the front,

place assembled handle down onto

extension on cleaner base.

Rock handle side to side while

pushing down firmly. Extra pushing

effort may be required.

Push

bolt

into hole (N) on lower

front

of handle.

If bolt will not go through hole

easily, check the following:

the bracket is properly

positioned (Fig. 1-9)

the handle is pushed down

completely (Fig. l-l 0)

Place

nut

in recessed area (0) at

back of handle.

Hold nut in place

while tightening bolt securely with a

screw driver.

Only one nut is needed on this

model. The extra nut is not required

but has been provided for your

convenience.

Step 4 Attach bag compartment

Pull bag door latch forward and

remove door. Set bag door aside.

Slide large tab (P) on bottom of bag

housing into slot between the brack-

et (Q) and the lower handle.

Y”

Note round opening and hooks (R)

on back of bag compartment.

Place opening over dirt tube (S) and

align hooks with slots in handle.

Push very firmly at

(T)

to snap

hooks into handle.

Pull on bag compartment to make

sure it is completely snapped to

handle.

Continued

Sqep

AHach

paper bag

Align opening in paper bag with dirt

tube (S) inside bag compartment. Push paper bag firmly onto tube.

Tuck top and bottom of paper bag

into bag compartment.

To replace bag door, insert the 2 tabs

on bottom of bag door into the 2 slots

on bag compartment.

Make sure all edges of paper bag

are completely inside the bag

compartment.

Close door.

Pull switch lock (U) above ON/OFF

switch (V) straight out.

Dispose of lock.

Note: If lock

has,come

off during

assembly make sure switch is in

the OFF position (down) before

plugging cord into electrical

outlet.

Step 6 Position tools

Raise handle to upright position.

Bring hose toward front of cleaner

and stretch hose over hose rack.

Push opposite hose end

firmly

into

rear “cup“ in rack.

Note:

Hose end must be firmly

connected to tool rack when

cleaning floors.

Position wand,with smaller diameter

end down, at

side

of cleaner as

shown.

Open tool cover. An

extra belt*

(AA) and

one extra

Position

dusting brush (X), paper bag* (BB)

can be stored on

furniture nozzle (Y), and crevice

the back of the cleaner handle as

tool

(Z), into

tool storage area

shown.

CAUTION: When cleaner is turned

on, the agitator will continue to

rotate when cleaner handle is in

upright position. Avoid tipping

cleaner or setting it on furniture,

fringed area rugs, or carpeted

stairs during tool use.

Fill out and return the product

registration card included with

your cleaner.

as shown. *some models

cleaner

description

Operate cleaner only at voltage specified on data plate on bottom of cleaner.

This cleaner is intended for household use.

The assembled cleaner will look like the

drawing.

Handte

ONIDFF

switch

3. Cord

hooks:

wrap cord around

hooks for storage. The top hook can

be rotated right or left for easy cord

release.

4. Furniture nozzle

5. Dusting brush

6. Crevice tool

7. Tool cover

8. Bag door latch

9. Bag door

10.

Final

filter door*

11. Stair cleaning handle

12. Hood

13. Carpet height control

14. Soft

GuardTM

protector:

provides

extra protection for your fine furniture.

15. Headlight

16. Hose

17. Extension wand

18. Extra belt* storage

19. Extra bag* storage

20. Handle release lever

*some models only

ON-OFF switch

To turn cleaner ON, push switch (A) up.

To turn cleaner Off, push switch down.

Note:

To reduce the risk of electric shock,

this appliance has a polarized plug (one

blade is wider than the other). This plug

will fit in a polarized outlet only one way.

If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit,

contact a qualified electrician to install the

proper outlet. Do not change the plug in

any way.

To insure that the filter bag is inflated, plug

cord into electrical outlet and turn cleaner

ON. With handle in upright position, pull

back on handle until front of cleaner(B) is

lifted off the carpet.

Hose end must be firmly pushed into “cup”

in tool rack for maximum suction on floors.

Handle positions

The handle of your cleaner has three

positions;

upright

for storage and when

using cleaning tools;

operating

for

general operation on carpet and floors;

low for reaching under low furniture. Step

on handle release lever to lower handle.

TLansporting

cleaner

To move your cleaner from room to

room, pot handle in upright position, tilt

cleaner back on rear wheels, and push

forward

IA).

.-...-

The cleaner can also be moved by

lifting it as shown in (B).

$sr&et

height adjust-

For ease in sliding the control, the han-

dle should be in the upright position.

When it is necessary to raise and lower the

front of the- cleaner (A) for various carpet

pile heights, slide the carpet height control

(3) to the correct setting.

The front of the cleaner will not move

into the adjusted position until the

handle is lowered to the operating

position.

When using hose and tools, slide the

control to the Cleaning Tools setting.

Return

m&-0iibqi.

tff

.ihe

correct

setting

when

cleaning.fi&s.

Do not leave

the.

control in the Cleaning

Tools

setting

when

cleaning

floors.

Place end of hose firmly into tool rack for

peak performance when cleaning carpets.

For maximum cleaning performance,

the following carpet height settings are

recommended.

Setting 1:

for

all

types. of carpet.

Higher

Settings:*for very deep pile

carpet

v&rare

easier pushing effort is

desired, while maintaining good cleaning

performance.

Setting

5: for hose and cleaning tool

use only.

*Note:

If the cleaner is difficult to push,

slide the control to the next higher setting.

Edge

cleaning

Special edge groomers are provided on

both sides of the front of the cleaner

to help remove dirt in carpet near

baseboards and furniture.

Guide either side of the cleaner parallel

to edge of carpet or furniture.

Cleaning lightweight

flexible

rugs

Stand on one end of rug and move

cleaner toward other end or edge.

Before reaching edge, push down on

handle. This will lift up the nozzle (front

of cleaner) and will prevent rug from

clinging to cleaner.

Continue to lift front of cleaner so that

when you have reached the edge, it is

completely off the rug. Move cleaner

back to start again, lower front of

cleaner, and use only forward strokes.

Stair

cleaning

stair cleaning handle

has been

designed for ease in using your cleaner

on stairs.

With handle in operating position, place

fingers under edge of stair cleaning

handle and guide cleaner with other

hand on upper handle.

As an alternative, you may use the hose

and furniture nozzle for stair cleaning.

When using cleaning tools, the

agitator will continue to rotate.

CAUTION: To avoid personal injury or

unnecessary wear to carpet, and to

prevent the cleaner from falling, use

extra

care if cleaner is placed on

stairs.

Cleaning tools

Tools allow you to clean surfaces above

the floor and reach hard to clean areas.

Use tools with the cleaner handle in

upright position.

CAUTION: Agitator continues to rotate

while cleaner handle is in upright

position. Avoid tipping cleaner or

setting it on furniture, fringed area

rugs, or carpeted stairs during tool

use.

How to

dean tools

To clean the hose, wipe off dirt with a

cloth dampened in a liquid detergent.

Rinse with a damp cloth.

Cleaning tools may be washed in warm

water with a detergent. Rinse and air

dry before using.

A. Move carpet height

control

Slide carpet height control to the

Cleaning Tools setting

to divert suction

to the hose and cleaning tools.

Return control to floor settings when

tool use is complete.

B. Select proper clean-

Attach wand and

ing tool tools

A. Dusting brush

may be used for

carved furniture, table tops, books,

lamps, lighting fixtures, Venetian blinds,

baseboards, shutters, and registers.

B. Furniture nozzle

may be used

for upholstered furniture, draperies,

tapestries, mattresses, dothing,

automobile interiors, and carpeted stairs.

Crevice tool

may be used in tight

spaces, corners and along edges in such

places as dresser drawers, upholstered

furniture, stairs, and baseboards.

D. Wand

is used to give extra length

to your hose. Attach it to any of the

above tools.

The tools are attached to the hose or the

wand in the same manner.

Push tool firmly onto hose; twist tool

slightly to tighten or loosen connection.

How to attach tool cover

The tool cover is designed with a

“break-away” feature which allows it to

snap off if it is pushed open too far. To

reattach,

aliin

hinges of cover with slots

on front of tool storage area. Press

cover back into place.

Familiarize yourself with these home

maintenance tasks as proper use and

care of your cleaner will ensure contin-

ued deaning effectiveness.

Filter bag

When to replace

Check filter bag from time to time. -It

is.

recommended that you change the filter

bag when dirt reaches the dotted line.

If more dirt than this

acCumulates,

your

cleaner may not operate effectively.

NOTE:

Chick

and change the filter bag

frequently when using cleaner on new

carpet due to rapid accumulation of

carpet fluff.

CAUTION: Very fine materials, such

as face powder, cornstarch, fireplace

ashes or fireplace soot, may seal the

paper bag and may cause it to burst

even though it is only partially full of

dirt. When cleaner is used to remove

material of this nature, change the

filter bag often.

Filter bags may be purchased from your

local Authorized Hoover Dealer (Depot),

Leading Retailers, from Hoover Factory

Service

%enters,

using the order form

packed with your cleaner, or through

The Hoover Company online at

www.hoover.com

To assure that your cleaner operates at

peak performance, it is imperative that

you use

only

genuine HOOVER filter

bags distributed by The Hoover

Company. HOOVER bags can be

identified by these trademarks

When ordering bags, be sure to give

the model number of your cleaner.

What to buy

If your cleaner was originally equipped

with a micro filtration bag, it is important

to use only

Genuine

HOOVEFP

Aller-

gen Filtration

Tvpe

disposable bags

in order to

maintain the original clean-

ing effectiveness of your cleaner.

Regular

HOOVER’ Type Z

disposable

filter bags also fit your cleaner,

Continued

Changing

,filter

,bag

Disconnect cleaner from electrical outlet.

Removing-bag door

Pull bag door latch forward and remove

door from cleaner.

Grasp bag collar and pull collar from tube.

Note: Do not clean

out

old bag and

reuse. Discard used bag.

Mxwing

and installing filter

Align opening in new filter bag with dirt

tube (B) inside bag compartment. Push

bag collar (A) firmly onto tube.

Fold

top of bag down under top of bag

compartment.

Replacing bag door

To replace bag door, lift up lower edge of

filter bag. Insert

the 2 tabs (C) on bottom

of bag door into the 2 slots on bag

compartment.

-Make

sure all edges of filter bag are

zompietely inside the bag

compart-

-ment.

Close door

Final

3ilter

(some models)

The final filter assists in the filtration process to return dean air to the room.

-How

to clean

Removing filter

Disconnect cleaner from electrical

out-

Lift out filter (A) and hand wash it in cold

.let.

water with mild detergent.

Removing door

Let filter air

dry

and reposition it on

remove this filter when it becomes the front of the cleaner. Make sure

dirty, depress door latch and remove

the white

colored side of filter faces

door.

outward.

-Headlight

What to buy

This cleaner uses a 12 volt, wedge base type 912 bulb, Hoover

part No. 27313-101

How to replace

Disconnect cleaner from electrical

outlet.

Removing hood

Using a Phillips head screwdriver,

remove the 4 hood screws (A) and lift off

carpet height control (B).

Lift hood off cleaner base just enough to

access the bulb.

Installing bulb and

reposition-

ing hood

Pull old bulb straight out of socket.

Push new bulb straight into socket until

locked in place

Excessive force is not required.

Reposition door

Place tabs (B) on door into slot in lower

front of cleaner. Close door.

Should you want to replace this filter, ask

for HOOVER part No. 38766017.

Reposition hood, carpet adjustment

control and the 4 screws. Tighten

screws securely.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hoover Staubsauger Handbücher

Hoover

Hoover DUST MANAGER DM5524 Bedienungsanleitung

Hoover

Hoover Cruise Series Bedienungsanleitung

Hoover

Hoover SteamVac Dual V Bedienungsanleitung

Hoover

Hoover Hydropower HYP 1630 011 Bedienungsanleitung

Hoover

Hoover Tempo Bagged Tempo Upright Vacuum Cleaner Bedienungsanleitung

Hoover

Hoover Freejet Bedienungsanleitung

Hoover

Hoover BH52210 Bedienungsanleitung

Hoover

Hoover UH70015 - Platinum Collection Cyclonic Bagless Upright... Bedienungsanleitung

Hoover

Hoover FloorMate Deluxe FH40162 Bedienungsanleitung

Hoover

Hoover REACT QuickLift UH73301 Bedienungsanleitung

Hoover

Hoover FREESPACE EVO Bedienungsanleitung

Hoover

Hoover UH50000 - Self Propelled WindTunnel Anniversary... Bedienungsanleitung

Hoover

Hoover Globe Bedienungsanleitung

Hoover

Hoover WindTunnel WindTunnel Bagless Canister Cleaner with Powered... Bedienungsanleitung

Hoover

Hoover SY71NM02 Bedienungsanleitung

Hoover

Hoover S3510050 Bedienungsanleitung

Hoover

Hoover Total Home Pro HS85-THP-ZA Bedienungsanleitung

Hoover

Hoover ATHYSS Bedienungsanleitung

Hoover

Hoover Rush TCR4226 Bedienungsanleitung

Hoover

Hoover ATHEN Bedienungsanleitung

Hoover

Hoover 39000067 T8250 011 0312 Bedienungsanleitung

Hoover

Hoover CH50400 Bedienungsanleitung

Hoover

Hoover UH30601 Bedienungsanleitung

Hoover

Hoover WINDTUNNEL 3 HIGH PERFORMANCE PET Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung