Hoover Commercial WindTunnel Bedienungsanleitung

Congratulations

on your purchase!

This WindTunnel TM vacuum cleaner

takes HOOVER® Type "Y" Allergen

Filtration filter bags

This product was designed for

easy assembly (see page 3)

Fill in and retain

The model and serial number are located on the bottom of the cleaner as shown.

For your personal records, please enter the COMPLETE model and serial number

in the spaces provided and retain this information.

Your cleaner is model

and has serial number

It is suggested that you attach your sales receipt to this owner's manual. Verifica-

tion of date of purchase may be required for warranty service of your HOOVER

product.

Be sure to fill out and return the product registration card included with

your cleaner,

Example

Index

Assembling Cleaner ......................... 3-5

Carton Contents ................................... 3

Cleaner Descriptions ........................... 5

How To Use ....................................... 5-8

Embedded Dirt FINDER TM Feature ..... 6

Cleaning Tools ............................. 7-8

If You Have a Problem ........................ 12

Important Safeguards .......................... 2

Lubrication .......................................... 11

Maintenance

Authorized Service ....................... 11

Cleaning Filters ............................... 9

Clearing Blockages ...................... 12

Replacing Agitator Brush Ro11.....11

Replacing Belt ............................... 10

Replacing Edge Groomers ........... 11

Replacing Headlight ..................... 10

Replacing Filter Bag ....................... 9

Thermal Protector .............................. 11

Warranty .............................................. 12

(_)2001 The Hoover Company

www, hoover, com

Important Safeguards!

When using an electrical appliance, always follow basic precautions, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

VV a r n i n g. Toreducetheriskof fire, electric shock, or injury:

•Do not use outdoors or on wet surfaces.

• Close supervision is necessary when any appliance is used by or near children.

Do not allow vacuum cleaner to be used as a toy or to run unattended at any

time.

• Keep hair, loose clothing, fingers, feet and all parts of body away from openings,

rotating agitator and other moving parts. Do not operate cleaner in bare feet or

when wearing open toe shoes or sandals.

• Do not pick up anything that is burning or smoking, such as cigarettes, matches,

or hot ashes.

• Do not use to pick up flammable or combustible materials such as gasoline or

fine wood sandings or use in areas where they may be present.

• Avoid picking up hard, sharp objects with the cleaner. They may damage the

cleaner and the bag.

• Always turn off this appliance before connecting or disconnecting hose.

• Do not use without dust bag or filters in place. Change bag frequently when

picking up very fine materials such as powder.

• Use extra care when cleaning on stairs.

• Do not put any object into openings. Do not use with any opening blocked; keep

free of dust, lint, hair, or anything that may reduce air flow.

• Do not pull or carry by cord, use cord as a handle, close door on cord or pull

cord around sharp edges or corners. Do not run appliance over cord. Keep cord

away from heated surfaces.

• Always disconnect cord from electrical outlet before servicing the cleaner.

• Unplug cleaner when not in use. Turn off all controls before unplugging.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the

cord. Never handle plug or appliance with wet hands.

• The use of an extension cord is not recommended.

1-330-499-9499 to speak with a representative in our Consumer Response Center

Visit us on-line at www,hoover, c0m to find the service outlet nearest you (click

on the "Service" button).

Carton contents

8 }

D ;

Remove all parts from carton and

identify each item shown. Make

sure all parts are located before

disposing of packing.

A. Handle section

B. Cleaner body

C. Hose rack

D. Hose, cleaning tools and wands

E. Handle bolts and nuts packet

(in bag with owner's manual)

Note: The white switch lock above the ON/OFF switch aids

in the assembly of your cleaner. Assembly can be continued

if the switch lock is missing. However, do not remove the

switch lock until assembly is completed.

Open tool cover on handle section

(A).

Attach hose rack to handle section

by fitting hooks (B) on rack over

slots (C) on handle section.

Align hole on rack with circular tab

on handle.

Removebagdooroncleanerbody

bypushingdownat topofdoorand

pullingdooroutward.

Switch (A) above bag door should

be in OFF position.

While holding rack in place, slide

handle onto cleaner body.

Make sure tab is inserted fully into

slot.

IPush bolts into holes on back of

handle.

Place nuts in recessed areas on front

of handle, Hold each nut in place

while tightening each bolt securely

with a Phillips screw driver.

Reposition bag door by fitting tabs

on bottom of door into opening,

Press top of door to snap securely

shut.

Press cord into the 3 notches and

the clip as shown,

NOTE Hose must be connected as shown for all

operations.

Align end of hose with projections (A)

over slots (B) in dirt duct.

Slide hose into (B) and twist hose to

lock it into place.

Lift hose tube cover (C)

Position hose over rack and into hose

tube (D) or (E) (depending on your

model).

Placesmallerunridgedendofwand,

intobottomof rack.Snapwandinto

clip. Repeatwithotherwand.

Opentoolcover.

Cleaner description

Insert ends of dusting brush (A),

crevice tool (B) into storage areas.

Secure furniture nozzle (C) in clip.

Close tool cover.

Remove switch lock (A) above ON/

OFF switch (B) by pulling it straight

out. Dispose of switch lock.

If switch lock has come off during

assembly, make sure switch is in

OFF position (down) before plug-

ging cord into electrical outlet.

1/2

12\

1. Handle

2. ON/OFF switch

3. Cord hooks: wrap cord

around hooks for storage.

The top hook can be

rotated right or left

for easy cord release.

4. Hose

5. Tool cover

6. Dusting brush

7. Furniture nozzle

8. Crevice tool

9. Carrying handle

10. Wands

11. Final filter door

12. Handle release lever:

step on lever to lower

handle to operating or low

positions.

13. Edge groomers

14. Furniture guard: helps

prevent cleaner frorrl

marking furniture.

15. Nozzle control knob: slide

knob to correct setting for

height of carpet being

cleaned.

16. Headlight*

17. Embedded Dirt FINDER TM

sensitivity switch*

18. 'Dirt FINDER' display*

19. Check bag indicator

20. Stair cleaning handle:

located below lower edge of

door.

21. Bag door

22. Cord clip

23. Hose rack

*some models only

The assembled cleaner will look

like the drawing.

Operate cleaner only at

voltage specified on data

plate on bottom of

cleaner.

This cleaner is intended for

household use.

Polarized plug

Toreduce the risk of electric shock, this

appliance has a polarized plug (one

blade is wider than the other). This plug

will fit in a polarized outlet only one way.

If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit,

contact a qualified electrician to install

the proper outlet. Do not change the

ON-OFF Switch

Plug cord into electrical outlet.

To turn cleaner ON, push switch up.

To turn cleaner OFF, push switch down.

Transporting cleaner

To move your cleeJner from room to

room, put handle in upright position, tilt

Gleaner back on rear wheels and push

forward.

ICarrying cleaner

The cleaner can also be moved by using

the carrying handle.

Handle positions

The handle of your Gleaner has three

positions; upright for storage and when

using cleaning tools; operating position

for general operation on carpet and

floors; low for reaching under low

Furniture. Step on handle release lever to

lower handle.

Embedded Dirt FINDER TM

fe ature (some models only)

With red and green lights (A), the 'Dirt

FINDER' system alerts the user to areas

of carpet that may need more cleaning

attention. It is able to sense when larger

amounts of dirt particles, especially

embedded dirt, are removed.

To let you know that the "Dirt FINDER'

feature is ready the red light will come on

when the cleaner is first turned on. After

a few seconds, the red light will go oft

and the green light will come on.

Cleaning may then begin.

The green light will remain on through-

out Gleaning except when the detector

senses that a larger amount of dirt is

being picked up; then the red light will

come on.

When the red light is on, you should take

additional cleaning strokes in the area

until it changes to green.

•The red light may seldom oonQe on

during cleaning. This means that your

cleaner is picking up primarily fine

surface dust and lint which the system

may not detect, or that the carpet is

generally Glean. To increase the

feature's sensitivity to dirt, set the

switch (B) to the "Hi" position.

"At other times, the red light may stay

on for a considerable amount of time.

This means that the carpet contains a

high level of dirt which is being removed

by the cleaner. To decrease the

feature's sensitivity to dirt, set the

switch to the "Reg." (Regular) position.

Carpet height

adjustment

P,llS]

P,E=] CD

Handle position

For ease in sliding knob, the handle

should be in the upriqht position It}.

._._1IIIIiliad,,,,,,,.

BARE

HIGH FLOOR

Setti n g s

For maximum cleaning performance,

the following carpet height settings are

Cleaning lightweight

flexible rugs

Stand on one end of rug and move

Gleaner toward other end or edge. Before

reaching edge, push down on handle.

This will lift up the nozzle (front of cleaner)

as shown and will prevent rug from

clinging to Gleaner. Continue to lift up

nozzle so that when you have reached

the edge, it is oorrlpletely off the rug.

Move Gleaner back to start again, lower

nozzle, and use only forward strokes.

Edge cleaning

Special edge groomers are provided on

both sides of the nozzle to remove dirt in

carpet near baseboards and furniture.

Guide either side of nozzle parallel to

edge of carpet or furniture.

IStair cleaning

A stair Gleaning handle has been de-

signed for ease in using your Gleaner on

stairs. With handle in operating position,

place fingers under edge of stair Gleaning

handle and guide cleaner with other hand

on upper handle.

As an alternative, you may use the hose

and furniture nozzle for stair cleaning.

Clean from bottom to top.

When using cleaning tools, the agitator

will continue to rotate.

CAUTION: To avoid personal injury or

unnecessary wear to carpet, and to

prevent the cleaner from falling, always

place it at bottom of stairs.

How to attach tool

cover

The tool cover is designed with a "break-

away" feature which allows it to snap

free if it is pushed open too far.

To reattaoh, align hinges of cover with

slots on sides of tool storage area.

Push cover down to secure in place.

Cleaning tools

Tools allow for cleaning surfaces above

the floor and for reaching hard to clean

areas.

The Gleaner is ready for tool use when

handle is in upright position.

CAUTION: Agitator continues to rotate

while cleaner handle is in upright

position. Avoid tipping cleaner or

setting it on furniture, fringed area

rugs or carpeted stairs during tool use.

Removing hose

When using cleaning tools, cleaner

handle should be in the upright

position. Also, turn cleaner OFF before

disconnecting and connecting hose to

hose tube (A).

To use hose, lift hose end as shown.

Lower cover (B) onto hose tube.

When you are finished Gleaning with the

tools, be sure to lift cover from hose

tube and rep0siti0n hose end into tube.

I c

Attach wand and tools

Attach tool or wand to the hose (C)

Attach second wand or tool to wand (U)

by pushing it firmly onto the wand.

Twist wand or tool slightly to tighten or

loosen the connection.

How to clean tools

To clean the hose, wipe off dirt with a

cloth dampened in a mild detergent.

Rinse with a damp cloth.

Cleaning tools rnay be washed in warm

water with a detergent. Rinse and air dry

before using.

Select proper tool

E. Dusting brush may be used for

carved furniture, table tops, books,

lamps, lighting fixtures, venetian blinds,

baseboards, shutters, and registers.

F. Furniture nozzle may be used for

upholstered furniture, draperies,

mattresses, clothing, automobile

interiors, and carpeted stairs.

G. Crevice t001 may be used in tight

spaces, corners and along edges in

such places as dresser drawers,

upholstered furniture, stairs and base=

boards.

H, Wands are used to give extra length

to your hose. Use them with any of the

above tools.

Check bag indicator

The indicator (I) will begin to show red as

filter bag fills with dirt.

There are three conditions that will cause

the indicator to become completely red:

1. The bag is full; change the bag.

2. Very fine materials have been picked

up, clogging the bag pores; change the

bag.

3. There is a blockage in the nozzle,

hose, tools or at the bag opening; remove

the blockage (see "Clearing blockages"

section).

Familiarize yourself with these home

maintenance tasks as proper use and

care of your cleaner will ensure contin-

ued cleaning effectiveness.

Filter bag

When to replace

Check filter bag from time to time. It is

recommended that you change the filter

bag when dirt reaches the dotted line. If

more dirt than this accumulates, your

cleaner will not operate effectively.

NOTE: All new carpet has loose fibers

which can fill the bag quickly while

vacuuming.

If you are using the cleaner on new

carpet, be sure to change the filter bag

often.

CAUTION: Very fine materials, such as

face powder, cornstarch, fireplace

ashes or fireplace soot, may seal the

filter bag and may cause it to burst

even though it is only partially full of

dirt. When cleaner is used to remove

material of this nature, change filter

Where to buy

Filter bags may be purchased from your

Authorized Hoover Dealer (Depot),

Leading Retailers, Hoover Factory

Service Centers or through The Hoover

Company on-line at www.hoover.com

What to buy

To assure cleaning effectiveness, use

only Genuine HOOVER@ Allergen

Filtration TypeY disposable filter bags.

It is irnperative that you use only genuine

HOOVER filter bags made by The Hoover

Company to assure that your Gleaner

operates at peak performance. HOOVER

bags can be identified by these trade-

Changing filter bag

Disconnect cleaner from electrical

outlet.

Removing bag door

To change filter bag, press down at top

of bag door and pull door forward.

Remove door.

Removing and installing filter

bag

Grasp filter bag collar (A) and pull collar

from tube (B).

Note: Do not Glean out old filter bag and

reuse. Discard used filter bag.

Hold new filter bag as shown. Align

opening in filter bag with (B).

Push (A) firmly onto (B).

Tuck in filter bag.

Replacing bag door

Reposition bag door by placing tabs on

bottom of door into opening (C).

Press top of door to snap securely shut. Cleaning secondary filter

Disconnect cleaner from electrical

outlet.

The secondary filter (A), located behind

the grill in the bottom of bag compart-

ment, protects the motor from dirt

particles.

If filter becomes dirty, pull off grill and lift

out filter.

Hand wash filter in Gold water with mild

detergent, then air dry.

Reposition dry filter and grill.

Should you want to replace this filter, ask

for HOOVER part No. 38765019.

Cleaning final filter

The final filter assists in the filtration

process to return clean _:]ir to the room.

To remove this filter when it becomes

dirty, open the door on the side of the

cleaner,

Lift out filter (B) and hand wash it in cold

water with mild detergent.

Let filter air dry and reposition it on the

side of Gleaner. Make sure the green

colored side of filter faces outward. Close

door.

Should you want to replace this filter, ask

for HOOVER part No. 40110004.

Reattaching filter door

The filter door is designed with a "break-

away" feature which allows it to snap free

if it is pushed open too far.

To reattach, align hinges (C) of cover with

slots on sides of filter area.

Press door back into place.

Check agitator shield

Because your cleaner picks up so well,

we strongly recommend you check for

debris accumulation under the agitator

shield each time you clean the filters.

Removing debris under the shield will

help maintain your cleaner's excellent

pick up and suction. Remove debris as

follows:

1. Disconnect cleaner from electrical

outlet.

2. Check for dirt accumulation by

removing bottom plate (Fig. 3-10),

removing agitator, (Fig. 3-11) and lifting

agitator shield (Fig. 3-13).

3. Remove any debris and replace

shield, agitator and bottom plate (Figs.

3-13 to 3-15).

Removing lens

Disconnect cleaner from electrical

outlet.

Using a screwdriver, remove the two

screws as shown and lip off lens.

Installing bulb

Pull old bulb straight out of socket. Push

new bulb straight into socket until locked

in place.

Excessive force is not required.

Replacing lens

Reposition lens and secure with the two

screws.

Belt replacement

The belt on your Hoover cleaner causes

the agitator to rotate and is important for

the effective operation of the cleaner,

The belt is located under the bottom

plate of the cleaner and should be

checked from time to time to be sure it is

in good condition,

When to replace

Disconnect cleaner from electrical

outlet.

To check belt, remove bottom plate as

shown in "How to replace." Replace belt

if it is stretched, cut or broken.

What to buy

To assure effective operation, use only

genuine HOOVER belts with your cleaner.

When purchasing a new belt, ask for

HOOVER part No. 38528033.

How to replace

Disconnect cleaner from electrical

outlet.

Removing bottom plate

Place handle in low position and turn

cleaner over so bottom side is up,

Remove the 4screws as shown with a

Phillips screw driver,

Lift off bottom plate (A).

Removing belt

Remove agitator brush roll and used belt.

Discard used belt

Installing new belt

With letterino on outside of belt and Replacing agitator- brush roll

In_rt _lNit_lt_r thr_tJ_h h_lt _1n¢] nla_ h_lt Securing agitator

Clr_¢r_ _l_it_lt_r fir_l\l _nrl fit it imt_

Andere Handbücher für Commercial WindTunnel

Inhaltsverzeichnis

Andere Hoover Staubsauger Handbücher

Hoover

Hoover ELITE SWIVEL XL PET UH75250 Bedienungsanleitung

Hoover

Hoover FM216LI Bedienungsanleitung

Hoover

Hoover ch20100 Bedienungsanleitung

Hoover

Hoover HF522NPW 011 Bedienungsanleitung

Hoover

Hoover SH40060 Bedienungsanleitung

Hoover

Hoover regal Bedienungsanleitung

Hoover

Hoover Concept one Bedienungsanleitung

Hoover

Hoover FoldAway UH40190 Bedienungsanleitung

Hoover

Hoover Synthesis ST71ST02 Bedienungsanleitung

Hoover

Hoover SteamVac C3820 Bedienungsanleitung

Hoover

Hoover CLEANSLATE FH14052V Bedienungsanleitung

Hoover

Hoover H-Energy 700 IM ML Bedienungsanleitung

Hoover

Hoover WindTunnel S3639 Bedienungsanleitung

Hoover

Hoover Convrtible U4109 Bedienungsanleitung

Hoover

Hoover POWER SCRUB Bedienungsanleitung

Hoover

Hoover Synua Plus Bedienungsanleitung

Hoover

Hoover Acenta Bedienungsanleitung

Hoover

Hoover HF322TP Bedienungsanleitung

Hoover

Hoover F7410 Bedienungsanleitung

Hoover

Hoover 5210 HERITAGE Bedienungsanleitung

Hoover

Hoover S1420050 Bedienungsanleitung

Hoover

Hoover SA1120 Bedienungsanleitung

Hoover

Hoover CU81CU15001 Bedienungsanleitung

Hoover

Hoover Guardsman C1633 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch