Hoover WindTunnel S3639 Bedienungsanleitung

Hoover®

WindTunnel

Canister Cleaner

Owner’s Manual

English ‹ pp. 1-14

Español ‹ pàg.15-21

Français ‹p.22-29

Review this manual before operating cleaner.

hoover.com

Index

Assembling Cleaner 3-4

Cleaner Description 5

How To Use

Canister Cleaner 5-6

Cleaning Tools7

Powered Nozzle 6

To Clean Stairs 8

If You Have a Problem 13

Clearing Blockages 13

Important Safeguards 3

Maintenance

Filter Bag 8

Filters 9

Lubrication 12

Power Hand Tool Brush Roll

Replacement 11-12

Power Hand Tool Belt

Replacement 12

Power Nozzle Agitator Brush

Roll Replacement 10-11

Power Nozzle Belt

Replacement 9-10

Replacing Headlight 11

Replacing Edge Groomers 11

Thermal Protector 11

Service12

Storage 7-8

Warranty 14

Parts & accessories

reorder form 31

S3630

S3639

ALABAMA

3980B Airport Blvd.

Mobile, AL 36608

(251) 341-0304

(251) 341-0395 fax

ARIZONA

3434 West Bell Rd.

Phoeniz, AZ 85053

(602) 439-2751

(602) 564-0938 fax

4881 E. Speedway Blvd.

Tucson, AZ 85712

(520) 795-5612

(520) 322-6016 fax

2136 East Baseline Rd.

Suite B-1

Mesa, AZ 85204

(480) 633-0622

(480) 633-0626 fax

CALIFORNIA

1047 N. State College Blvd.

Anaheim, CA 92806

(714) 635-5710

(714) 635-8432 fax

1803A El Camino Real

Burlingame, CA 94010

(650) 652-7810

(650) 652-7811 fax

1660 Contra Costa Blvd.

Suite C

Pleasant Hill, CA 94523

(925) 674-1206

(925) 674-1304 fax

17498 Hawthorne Blvd.

Torrance, CA 90504

(310) 921-6523

(310) 921-6533 fax

1834 Fulton Ave.

Sacramento, CA 95825

(916) 481-4860

(916) 481-1528 fax

3628 Geary Blvd.

San Franciso, CA 94118

(415) 668-5101

(415) 668-5976 fax

699 Lewelling Blvd

Suite 182

San Leandro, CA 94579

(510) 346-2400

(510) 346-2402 fax

6487 N. Blackstone Ave.

Fresno, CA 93710

(559) 449-8258

(559) 449-0302 fax

230 S. Lake Ave., #2

Pasadena, CA 91101

(626) 229-0636

(626) 229-0638 fax

19030 Ventura Blvd.

HOOVER SALES & SERVICE CENTERS

CENTRES DE VENTE ET DE SERVICE HOOVER

Tarzana, CA 91356

(818) 345-7637/7827

(818) 609-1246 fax

1287 Morena Blvd.

San Diego, CA 92110

(619) 276-9560

(619) 276-4359 fax

COLORADO

5142 N. Academy Blvd.

Colorado Springs, CO 80918

(719) 260-9988

(719) 260-8353 fax

2200 S. Monaco Pkwy.

Denver, CO 80222

(303) 757-4904

(303) 757-2723 fax

FLORIDA

303 E. Altamonte Dr

Suite 1100

Altamonte Springs, FL 32701

(407) 831-1444

(407) 831-5444 fax

102 S. Flamingo Rd.

Pembroke Pines, FL 33027

(954) 432-0031

(954) 432-6350 fax

GEORGIA

3655 Roswell Rd. NE

Suite 126

Buckhead, GA 30342

(404) 814-1574

(404) 814-1035 fax

1064 Old Peachtree Rd.

Suite 102

Lawrenceville, GA 30043

(678) 442-9907

(678) 442-9947 fax

2960 Shallowford Rd. #200

Marietta, GA 30066

(678) 560-0066

(678) 560-0068 fax

10779 Alpharetta Hwy.

Suite 170

Roswell, GA 30076

(770) 649-0425

(770) 649-0704 fax

IDAHO

520 S. Meridan Rd

Suite 150

Meridian, ID 83642

(208) 855-4775

(208) 855-4776 fax

ILLINOIS

1372 Winston Plaza

Melrose Park, IL 60160

(708) 344-3800

(708) 344-3853 fax

4328 East New York St.

Aurora, IL 60504

(630) 499-5728

(630) 499-5816 fax

IOWA

3001-100th St.

Urbandale, IA 50322

(515) 331-0550

(515) 331-0545 fax

KENTUCKY

4131 Shelbyville Rd.

Louisville, KY 40207

(502) 895-4775

(502) 895-9874 fax

MARYLAND

7632 Belair Rd.

Baltimore, MD 21236

(410) 668-8100

(410) 668-9228 fax

305 Muddy Branch Rd.

Gaithersburg, MD 20878

(301) 948-0864

(301) 948-0866 fax

MICHIGAN

19799 West 12 Mile Rd.

Southfield, MI 48076

(248) 552-6253

(248) 552-6256 fax

MINNESOTA

8922 Highway 7

St. Louis Park, MN 55426

(952) 935-0091

(952) 935-0462 fax

1539 W. Larpenteur Ave.

St. Paul, MN 55113

(651) 644-8684

(651) 644-6621 fax

MISSOURI

201 East Gregory

Kansas City, MO 64114

(816) 333-7440

(816) 333-3184 fax

18931 Valley View Pkwy.

Suite F

Independence, MO 64055

(816) 795-5303

(816) 795-5759 fax

NEBRASKA

2449 S. 120th Street

Omaha, NE 68144

(402) 330-2290

(402) 330-7675 fax

NEVADA

2050 East Serene Ave.

Suite 620-3

Las Vegas, NV 89123

(702) 614-0777

(702) 614-0787 fax

7920 W. Tropical Parkway

Suite 110

Las Vegas, NV 89149

(702) 645-4320

(702) 645-7518 fax

NEW MEXICO

4770 Montgomery VC NE

Suite A-103

Albuquerque, NM 87109

(505) 883-0800

(505) 883-4970 fax

NEW YORK

3312 Sheridan Drive

Amherst, NY 14226

(716) 831-0153

(716) 833-2423 fax

3523A Hempstead Turnpike

Levittown, NY 11756

(516) 520-1233

(516) 520-1293 fax

1577 Ridge Rd. West

Rochester, NY 14615

(585) 865-7190

(585) 865-7214 fax

320 Northern Lights Plaza

No. Syracuse, NY 13212

(315) 454-4682

(315) 454-4782 fax

NORTH CAROLINA

6449 Albemarle Rd.

Charlotte, NC 28212

(704) 568-0371

(704) 568-4283 fax

OHIO

4032 Belden Village St.

Canton, OH 44718

(330) 491-0086

(330) 491-0140 fax

101 E. Alex-Bell Rd #109

Centerville, OH 45459

(937) 291-3560

(937) 291-0076 fax

2256 Waycross Rd.

Forest Park, OH 45240

(513) 522-7575

(513) 522-7580 fax

7714 B Montgomery Rd.

Cincinnati, OH 45236

(513) 791-7930

(513) 791-7934 fax

5160 Great Northern Plaza

North Olmsted, OH 44070

(440) 734-2755

(440) 734-2799 fax

5831 Sawmill Rd.

Columbus, OH 43017

(614) 760-9399

(614) 760-9331 fax

104 Boardman-Poland Rd.

Boardman, OH 44512

(330) 758-1828

(330) 758-1332 fax

3109 West Market Street

Fairlawn, OH 44333

(330) 864-6700

(330) 864-6702 fax

OKLAHOMA

3710 NW 50th St.

Oklahoma City, OK

73112

(405) 947-4436

(405) 947-0886 fax

OREGON

4130 SW Lombard Ave.

Suite 110

Beaverton, OR 97005

(503) 574-2696

(503) 574-2762 fax

PENNSYLVANIA

1155 Washington Pike

Bridgeville, PA 15017

(412) 221-4568

(412) 221-0145 fax

245 Lancaster Pike

Frazer, PA 19355

(610) 651-0570

(610) 651-0572 fax

TENNESSEE

2200 N. Germantown

Pkwy

Suite 7

Cordova, TN 38016

(901) 266-0333

(901) 226-0811

9309A Kingston Pike

Knoxville, TN 37922

(865) 690-0785

(865) 694-9985 fax

1010 Murfreesboro Rd.

Suite 126

Franklin, TN 37064

(615) 599-2949

(615) 599-9663 fax

TEXAS

13536 Preston Rd

Suite 100

Dallas, TX 75240

(972) 503-9494

(972) 503-9496 fax

2930 Preston Rd.

Frisco, TX 75034

(469) 633-0555

(469) 633-0745 fax

7613 Westheimer

Houston, TX 77063

(713) 334-0199

(713) 334-1341 fax

6900 San Pedro,

Suite 137

San Antonio, TX 78216

(210) 829-1906

(210) 805-0612 fax

19507 I-45, Suite #900

Cypresswood Ct.

Spring, TX 77388

(281) 288-5803

(281) 288-5876 fax

1823 W Bay Area Blvd.

Webster, TX 77598

(281) 338-2830

(281) 338-2835 fax

1491 Lee Trevino

Suite D

El Paso, TX 79936

(915) 598-8633

(915) 598-8610

UTAH

6935 Park Centre Drive

Salt Lake City, UT 84121

(801) 304-0516

(801) 304-0546 fax

VIRGINIA

9018 W. Broad Street

Richmond, VA 23294

(804) 747-8249

(804) 747-3395 fax

WASHINGTON

837 NE Northgate Way

Seattle, WA 98125

(206) 367-4425

(206) 367-0632 fax

2911 North Monroe

Spokane, WA 99205

(509) 328-9514

(509) 328-9562 fax

WEST VIRGINIA

35 Riverwalk Plaza

S. Charleston, WV 25303

(304) 744-4748

(304) 744-4779 fax

WISCONSIN

2791 South Oneida St.

Ashwaubenon, WI 54304

(920) 494-9441

(920) 494-5059 fax

505 S. Midvale Blvd.

Madison, WI 53711

(608) 238-3470

(608) 238-0120 fax

10244 W. National Ave.

West Allis, WI 53227

(414) 327-7430

(414) 327-9875 fax

11211 120th Ave.

Suite D-067

Pleasant Prairie, WI

53142

(262) 857-3176

(262) 857-6815 fax

CANADA

Hoover Canada

9012 L’Acadie Blvd.

Montreal, Quebec

H4N 2Y8

(514) 384-8030

(514) 384-5940 fax

Hoover Canada

4151 N. Service Rd.

Burlington, Ontario

L7R 4A8

(905) 335-3311

(905) 335-3320 fax

7/06

Important Safeguards!

When using an electrical appliance, always followbasic precautions, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

Warning:

• Do not use outdoors or on wet surfaces.

• Close supervision is necessary when any appliance is used by or near children. Do not allow vacuum cleaner to be used

as a toy or to run unattended at any time.

• Keep hair, loose clothing, fingers, feet and all parts of body away from openings, rotating agitator and other moving parts.

Do not operate cleaner in bare feet or when wearing open toe shoes or sandals.

• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

• Do not use to pick up flammable or combustible liquids such as gasoline or fine wood sandings or use in areas where

they may be present.

• The hose contains electrical wires. Do not use if damaged, cut or punctured.

• Avoid picking up hard, sharp objects with the cleaner. They may damage the cleaner and the bag.

• Always turn off this appliance before connecting or disconnecting hose or motorized nozzle.

• Do not use without dust bag or filters in place. Change bag frequently when picking up very fine materials such as powder.

• Use extra care when cleaning on stairs.

• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, or anything that

may reduce air flow.

• Do not pull or carry by cord, use cord as a handle, close door on cord or pull cord around sharp edges or corners. Do not

run appliance over cord. Keep cord away from heated surfaces.

• Always disconnect cord from electrical outlet before servicing the cleaner.

• Unplug cleaner when not in use. Turn off all controls before unplugging.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Never handle plug or appliance with wet hands.

• If cleaner has a cord reel, hold on to the plug while cord is being rewound to prevent cord from whipping.

• The use of an extension cord is not recommended.

• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors,

Hoover Sales and Service Center or Authorized Hoover Warranty Service Dealer (Depot).

• Use vacuum cleaner only for its intended use as described in the instructions. Use only attachments recommended by

Hoover; others may cause hazards.

To reduce the risk of fire, electric shock or injury:

Save these

instructions!

Unpack cleaner from carton and

identify the parts shown. Remove

and dispose of cardboard

packing.

1-1

1. Assembling cleaner

Hold plug until cord is rewound.

17. Micro filter: aids in filtration of dirt particles.

18. Tool lid: pull up on edge of lid in recessed area.

19. Bag lid latch: lift to open bag lid.

20. ON/OFF pedal: conveniently located on top of cleaner.

21. Hose connector

22. Receptacle: connect power

Carton contents

Continued ﬂ

Push plug on power nozzle cord

completely into receptacle under-

neath hand grip.

Always disconnect cleaner from

electrical outlet before attaching

or removing power nozzle plug.

1-7

To attach the hose to the extension

wands, push latch (F) on the hand

grip to the unlock symbol.

Push the hand grip (G) down onto

wand so that the button projection (H)

fits into the slot. Push the latch to the

lock symbol to secure wand.

Attach second wand to the first.

Position cord into cord clips (E) on

wands, placing excess cord between

nozzle and bottom cord clip (located

on wand storage clip).

1-5 1-6

Connect hose, wands and nozzle

1-2 1-3

nozzle cord to canister cleaner.

23. Carrying handle

This cleaner is intended for house-

hold use.

This cleaner was inspected and pack-

aged carefully before being shipped

from the factory. If you should hap-

pen to need assistance during as-

sembly or operation,

Visit us online at hoover.com to find

the service outlet nearest you (click

on the “Service” button) OR

Call 1-800-944-9200 for an auto-

mated referral of authorized service

outlet locations (U.S. only) OR Call

1-330-499-9499 to speak with a rep-

resentative in the Hoover Consumer

Response Center.

Connect hose

With hose toward front of cleaner,

push hose connector into opening in

bag lid.

When hose is attached properly,

hose cord plug will reach to recep-

tacle on cleaner.

Insert plug as deeply into the re-

ceptacle as possible. Latch (A) will

automatically fasten. Cleaner will not

operate unless plug is inserted into

receptacle.

To disconnect hose, first remove

hose cord plug from receptacle while

pulling out on latch. Then, depress

buttons (shown in Fig.1-2 by arrows)

on hose connector and pull up.

Note: The flexible hose contains

electrical wires for connection to

the power nozzle and should not

be used if damaged. The wires

should not be seen through the

outer skin.

Attach nozzle and wands

The wand with the storage clip con-

nects to the power nozzle.

Attach it to power nozzle by fitting

button projection (B) on nozzle con-

nector (C) into opening near end of

wand. Be sure nozzle is locked in

place.

To release, press down on center of

latch (D) and remove nozzle.

1-4

Polarized plug

To reduce the risk of electric shock,

this appliance has a polarized plug

(one blade is wider than the other).

This plug will fit in a polarized outlet

only one way. If the plug does not fit

fully in the outlet, reverse the plug. If

it still does not fit, contact a qualified

electrician to install the proper outlet.

Do not change the plug in any way.

2. How to use

Cleaner description The assembled cleaner will look like one of these drawings.

Operate cleaner only at voltage

specified on data plate on bottom

of cleaner.

A. Canister cleaner

B. WindTunnel™ powered nozzle

C. Extra paper bag (one bag is

installed in cleaner)

D. Extension wands and hose

1. WindTunnel™ carpet and floor

power nozzle: automatically ad-

justs to different carpet pile heights.

2. Headlight

3. Spring latch: locks extension

wands together or locks wand to

nozzle or tool.

4. Wand storage clip: place

cleaner on end and hook clip onto

bottom of cleaner.

5. Extension wands: used with rug

and floor nozzle. One or both

wands may be used with cleaning

tools.

6. Wand/tool latch: used to lock

hand grip to extension wands or

cleaning tools.

12. Hard floor tool

13. Furniture nozzle

14. Powered hand tool: stores in

tool lid (some models)

15. Large wheels: provide easy

towing when cleaner is pulled over

carpet, area rugs and door sills.

16. Cord rewind pedal: step on

pedal to rewind cord for storage.

10 11 12

19 20

7. Floor surface selector but-

ton:

push button toward RUG for carpet

cleaning or BARE for hard surface

floor cleaning.

8. Hand grip

9. Receptacle: connects power

nozzle cord underneath hand grip.

10. Dusting brush

11. Crevice tool

2-1

S3630

S3639

Continued ﬂ

11 12

Edge cleaning

Special edge groomers are provided

on both sides of the nozzle to remove

dirt in carpet near baseboards and fur-

niture. Guide side of nozzle parallel to

edge of carpet or furniture as shown.

terrazzo, as well as carpet.

To set the power nozzle for hard

surface floor cleaning, push the floor

surface selector button toward BARE

(D). This setting provides suction and

no agitator action. If you prefer, you

may use the wall/floor brush to clean

bare floors.

You will find it particularly convenient

when cleaning lightweight area rugs

to set the floor surface selector but-

ton on BARE and continue cleaning

the surrounding floor surfaces.

Note: The headlight will be ON in

both the RUG and BARE floor sur-

face modes.

Floor surface selector

Carpet or rug cleaning

When using the power nozzle for

carpet and rug cleaning, push the

floor surface selector button toward

RUG (C). This setting provides the

suction and agitator action necessary

to deep clean carpets.

Hard surface floor cleaning

The power nozzle can be used for

cleaning hard surface floors such as

wood, linoleum, vinyl, asphalt and

rubber tile, sealed cork, concrete and

Deluxe power nozzle

Handle positions

The handle has two positions when

used with the power nozzle: upright

and operating.

To lower handle to operating posi-

tion, place your foot firmly on the

power nozzle and pull handle back.

ON-OFF switches

After assembling cleaner, plug cord

into electrical outlet. Turn cleaner on

by depressing ON-OFF pedal (A).

To turn cleaner off, depress pedal

again.

Note: Pedal opposite ON-OFF

pedal is Cord Rewind Pedal (B).

2-2

2-3 2-4

2-5

2-6

Cleaning tools

The cleaning tools are conveniently

stored in the cleaner underneath

the tool lid. Pull up on edge of lid in

recessed area to open.

The lid is also designed with a

“break-away” feature which allows

it to snap off if it is pushed open too

far. To re-attach, align small knobs

on hinge area of lid with slots at rear

of cleaner; press lid back into place.

The cleaning tools have many uses.

Select the tool best suited for the

cleaning task from the following

descriptions.

To remove the tool (or wand), push

the latch to the unlock position.

To connect tools to metal wands,

insert end of tool into wand and snap

into position. To disconnect, press

down on the center of spring latch

and remove tool.

How to store cleaner

The cleaning tools are conveniently

stored in the cleaner, as shown. To

replace the wall/floor brush, be sure

to turn the connector toward the cord

rewind pedal (J) before pushing the

brush in place.

Wand storage clip

To save storage space, stand the

cleaner on end and hook wand stor-

age clip on bottom of cleaner. The

nozzle must be positioned down

as shown.

Lift up on wand to remove storage

clip from cleaner.

How to clean stairs

Clean stairs by placing cleaner on

2-8

2-9 2-10

Select the proper tool

E. Crevice tool may be used in tight

spaces, corners, and along edges

in such places as dresser drawers,

upholstered furniture, stairs and

baseboards.

F. Furniture nozzle may be used for

upholstered furniture, draperies, tap-

estries, mattresses, clothing, auto-

mobile interiors and carpeted stairs.

2-7

How to connect

To use the cleaner with tools, discon-

nect the power nozzle from the hand

grip.

Tools may be attached directly to

the hand grip. With the latch in the

unlock position, insert tool (or

wand if extra length is needed), then

push latch to the lock position to

secure.

Continued ﬂ

G. Dusting brush may be used for

carved furniture, table tops, books,

lamps, lighting fixtures, venetian

blinds, baseboards, shutters and

registers.

H. Hard floor tool may be used for

walls and very irregular hard surface

floors such as brick and slate.

I. Powered hand tool (some

models) may be used for uphol-

stered furniture, carpeted stairs, and

hard to reach places.

2-11

Powered hand tool stor-

age (some models)

The powered hand tool stores in the

tool lid.

To remove tool, grasp end of tool

and pivot forward.

Filter bag

When to replace

When bag is filled with dirt, the

cleaner will not operate efficiently.

Discard used bag.

CAUTION: Very fine materials,

such as face powder or corn-

starch, may seal the paper bag

and may cause it to burst even

though it is only partially full of

dirt. When the cleaner is used to

remove material of this nature,

change the bag often.

Where to buy

Filter bags may be purchased from

until the blockage is found:

1.Turn cleaner off and disconnect

from electrical outlet; then discon-

nect power nozzle plug and wands

from hand grip.

2-13

Authorized Hoover Dealers (Depots),

Leading Retailers, Hoover Sales and

Service Centers, or through Hoover

online at hoover.com.

What to buy

In order to maintain the original

cleaning effectiveness and superior

filtration qualities of your cleaner,

use only Genuine HOOVER® Al-

lergen Filtration Type S disposable

filter bags.

Regular HOOVER® Type S dispos-

able bags also fit your cleaner and

will give satisfactory performance.

To assure that your HOOVER clean-

3. Maintenance er operates at peak performance,

it is imperative that you use only

genuine HOOVER filter bags made

by Hoover. HOOVER bags can be

identified by these trademarks—

How to replace

Disconnect cleaner from electrical

3-1

outlet.

Rotate hose to the side, lift bag lid

latch and open bag lid.

Carefully pull out used bag.

Slide bag collar of new bag firmly

into holder.

3-2 3-3

Fit sides of bag into bag cavity below

seal (A).

2-12 2-14

The powered hand tool (some

models) is ideal for cleaning car-

peted stairs. Use light pressure when

cleaning with the powered hand tool

as excessive pressure may cause

the brushes to stall.

end. Clean stairs from bottom to top.

Clearing blockages

Low suction or pick up may be due

to a blockage in the system. Refer

to the following steps to check for

blockages, continuing with each step

and micro

How to clean

Disconnect cleaner from electrical

outlet.

The secondary filter, located behind

the grill in the bag compartment,

protects the motor from dirt particles.

If filter becomes dirty, pull off grill and

lift out filter. Wash filter in warm water

or replace it with a new one. A dry

filter must be put back into cleaner.

Do not operate cleaner without

secondary filter in place.

The micro filter aids in the filtration

and unscrew the 4 recessed Phillips

head screws.

Note: Do not remove the 3 screws

in the triangle formation as these

hold the motor in place.

Return nozzle to original position and

3-8

3-9

process to return clean air to the

room. To remove this filter, open tool

lid, remove dusting brush and pull up

white filter cassette.

If filter is dirty, open grid on cassette

and remove filter. Wash filter in warm

water or replace it with a new one.

A dry filter must be put back into

cleaner.

3-6

Power nozzle belt

replacement

The belt in your power nozzle drives

the agitator. It has been designed

specifically for use in this cleaner and

is important for effective operation.

What to buy

There are other belts manufactured

that are similar in shape and size, but

are not designed for the HOOVER

power nozzle. Such belts do not

operate the agitator correctly and may

create stress which could damage your

power nozzle.

Use only a genuine HOOVER belt

part no. 40201-180 when a belt re-

placement is necessary.

When to replace

The belt should be checked from time

to time to be sure it is in good condi-

tion. To check, remove the hood (see

following section). Replace the belt if it

is stretched, cut, or broken.

Disconnect cleaner from electri-

cal outlet and disconnect power

nozzle from extension wands.

How to replace

To remove hood, turn nozzle over

3-7

Continued ﬂ

3-4 A

Clear bag opening (B) by pushing

the pierced paper through opening

toward bag interior.

Close bag lid.

How to attach bag lid

The bag lid and hinges are designed

with a “break- away” feature. If the lid

is pushed open too far, it will come

off. It can be easily re-attached by

aligning the hinges with the appropri-

ate slots in the cleaner, as shown.

Filters - secondary

3-5

place. Turn agitator, making sure it

rotates freely.

Replace brush roll cover (C) over

agitator brush roll. Replace 3 short

screws.

Position hood on top of nozzle base.

on belt must be visible.

Stretch belt back and attach to motor

pulley.

Hold opposite end of agitator brush

roll in place. Push belt end forward,

rotating end plate (F) until it slides into

Turn nozzle over. Replace 2 short

screws at the back of nozzle and 2

long screws at the front.

Agitator brush roll

replacement

3-13 3-14 3-15

Disconnect cleaner from electrical

outlet.

1. Remove hood, duct cover, belt and

brush roll as shown in Figs. 3-9 to

3-14.

2. Discard old brush roll.

3. Replace new brush roll and belt as

shown in Figs. 3-15 to 3-17.

Headlight replace-

ment

The headlight, located on top of

the power nozzle, operates when

the cleaner is turned on. Use only

HOOVER part no. 27317-307,

which is a fused bulb, when replac-

When to replace

Disconnect cleaner from electri-

cal outlet.

When agitator brush roll brushes

are worn, the brush roll should be

replaced.

To check condition of brushes, move

edge of a card across bottom plate

while turning brush roll. To maintain

cleaning effectiveness, replace brush

roll if brushes do not touch card.

What to buy

When purchasing a new agitator

brush roll, ask for HOOVER part no.

48414-071.

How to replace

3-16 3-17

3-18

ing the headlight.

How to replace

Disconnect cleaner from electri-

cal outlet and disconnect power

nozzle from extension wands.

1. Remove the hood as shown in

Figs. 3-9 and 3-10.

2. Push old bulb into socket and

twist to remove. Push new bulb into

socket and twist into place.

3. Replace hood.

Thermal protector

An internal thermal protector has

Lift up end of agitator brush roll. Re-

move old belt from agitator pulley (E)

and replace with new belt. Lettering

Lift off brush roll cover (C).

If belt is not broken but is stretched

or cut, pull it off the motor pulley (D).

lift off hood.

Remove brush roll cover (C) by re-

moving the 3 Phillips head screws.

3-10 3-11 3-12

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hoover Staubsauger Handbücher

Hoover

Hoover WindTunnel Wind Tunnel Canister Cleaner with Powered... Bedienungsanleitung

Hoover

Hoover U5725960 Bedienungsanleitung

Hoover

Hoover SteanVac Bedienungsanleitung

Hoover

Hoover SteamJet COMPACT SCM1500 Bedienungsanleitung

Hoover

Hoover UH72450 Bedienungsanleitung

Hoover

Hoover POWERDASH Bedienungsanleitung

Hoover

Hoover KS30PAR Bedienungsanleitung

Hoover

Hoover Dubl-Duty Bedienungsanleitung

Hoover

Hoover FH40150 Series Bedienungsanleitung

Hoover

Hoover FREESPACE Bedienungsanleitung

Hoover

Hoover LA71SM10 Bedienungsanleitung

Hoover

Hoover Freedom FR7187 Bedienungsanleitung

Hoover

Hoover SteamVac Turbo POWER Carpet Cleaner with Auto Rinse... Bedienungsanleitung

Hoover

Hoover freemotion Bedienungsanleitung

Hoover

Hoover WindTunnel Tempo UH30301 Bedienungsanleitung

Hoover

Hoover U8187950 Bedienungsanleitung

Hoover

Hoover F7428 Bedienungsanleitung

Hoover

Hoover Purepower PU2111 001 Bedienungsanleitung

Hoover

Hoover CAPTURE Bedienungsanleitung

Hoover

Hoover 53425 Bedienungsanleitung

Hoover

Hoover Freespace TFS-8205 Bedienungsanleitung

Hoover

Hoover HQ86-GC-M Bedienungsanleitung

Hoover

Hoover HURRICANE Bedienungsanleitung

Hoover

Hoover FH50210 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch