Hoover DIAL-A-MATIC 1100 Bedienungsanleitung

Instructions for

YOUR NEW HOOVER

DIAL-A-MATIC CLEANER

Model 1100

HANDLE

GRIP

OPENING

FOR

HANGING

CLEANER

STORAGE

AREA

ON/OFF

SWITCH

COVER

LATCH

NOZZL

HOSE

MODEL 1100

HANDLE

TO ATTACH HANDLE TO

CLEANER

Remove tape and screw from handle socket and set aside for later use.

Connect electric plug from bottom of handle to electric plug projecting

from handle socket. Make sure plug assembly is positioned as shown

in illustration.

Push handle into place in handle socket. The excess wire and electric

plugs are guided into handle tube.

4. Line up holes in handle and handle socket. Insert screw and tighten

with screwdriver.

HANDLE

ADJUSTMENTS

The handle on your clean-

er has three positions

storage, operating,

and

low (for reaching under

low furniture). The handle

can be lowered by step-

ping on pedal at the left

rear of cleaner. The

handle should always be

in storage position when

cleaning tools are used.

THIS IS THE

ttHEART”

OF Y

THE DIAL-A-MAT/C GIVES THE BEST AND MOST

E/=F/C/E)

SET THE DIAL FOR

CARPET AND RUG

CLEANING

Your new HOOVER DIAL-A

MATIC

is the most powerful up-

right cleaner ever built. Proper

suction control for your floor

coverings is most important for

cleaning effectiveness and ease

of operation.

FIRST, set the dial between

“MEDIUM” and “LOW”. This

will be the correct setting for

the majority of rug thicknesses.

For deep pile carpets, shag

rugs, cotton rugs, or lightweight

throw rugs, move the lever to-

ward “LOW” if the cleaner does

not push easily.

For low pile, sculptured, or

multi-level rugs, it may be

necessary to move the lever to-

ward “HIGH”.

When you have the proper setting

on the dial, your Hoover will

push easily and clean thor-

oughly.

V HOOVER DIAL-A-MATIC CLEANER

SE OF A VACUUM

CbEANER

THAT YAS EVER BEEN DEVISED.

SET THE DIAL FOR

CLEANING TOOLS

The handle of the cleaner

should be in storage position

(See page 2) when cleaning

tools are used. When the

handle is in this position, the

nozzle is raised and the

agitator does not come in

contact with the rug.

Attach hose and cleaning

tools (Page

7).

Set lever on

Suction Control Dial to

“High” under “Cleaning

Tool

Use”

for most clean-

ing. For cleaning draperies

and delicate fabrics, move

lever toward

‘

Low’

The lever can be placed at

“High”, “Medium”,

“Low’~

or any space between these

markings.

THE CLEANING TOOLS MODEL

1101

(See Page 5 for setting Suction Control Dial when using tools.)

The cleaning tools have many uses. Some are listed below:

TUFFLEX HOSE Double vinyl reinforced with nylon mesh for

long, trouble-free life. The light flexible hose has a vinyl tab,

so it can be hung on the cleaner or on a hook in a closet.

2. TELESCOPING WAND When you

require extra length for cleaning

bare floors or hard-to-reach places,

attach the telescoping extension

wand.

To lengthen the wand, push in on the

plastic latch and extend wand until

it locks in place. To shorten, use

opposite procedure.

FLOOR BRUSH For Hard Surface Floors and Carpeted Stairs.

UPHOLSTERY NOZZLE For Upholstered Furniture, Draperies,

Tapestries, Mattresses, Clothing, Automobile Interiors, Stairs.

DUSTING BRUSH For Carved Furniture, Table Tops, Books,

Lamps, Light Fixtures, Venetian Blinds, Registers, Baseboards.

6. CREVICE TOOL For Upholstered Furniture, Edges of

Wall-to-

Wall Carpeting, Radiators, Dresser Drawers.

TO STORE TOOLS

While moving furniture, hose can be

conveniently hung on handle.

The vinyl tool kit has

been,designed

so the tools can be packed inside

and the hose attached, by strap, on

outside. The kit has two slots

located near the top for ease in

hanging on the cover latch of the

cleaner or on a hook in the closet.

TO CLEAN TOOLS

To clean the hose, wipe off dirt with

a cloth, dampened with a liquid

detergent. Use a damp cloth to re-

move the detergent. Cleaning tools

can be washed in warm water with a

detergent. Rinse and let dry before

using.

TO CONNECT HOSE TO CLEANER

Insert hose connector in opening below dial. Turn hose connector

in either direction until it locks in place.

TO CONNECT TOOLS

To connect the cleaning tools to either the telescoping wand or

hose, press down on the plastic latch and fit the attachment into

place making sure the button on the attachment is locked in

place. To release, press down on plastic spring latch and remove.

HELPFUL HINTS

EASY TO CARRY Use the comfort-

able handle grip for carrying your Hoover

cleaner, or move it from room to room by

tipping it back on wheels and pushing it.

DON’T

PICK

TACKS

Hard,

sharp objects should not be picked up

by the cleaner. They may damage the

hose and the throw-away bag.

TAKE CARE OF CORD It should

be wound loosely on cover latch and

lever on Suction Control Dial to avoid

unnecessary strain. The clip-on plug

snaps directly onto the cord. Don’t run

your cleaner over the cord

it may

damage the insulation.

IF TROUBLE OCCURS If the

cleaner does not pick up surface dirt,

it is an indication that something is

wrong. Here are some of the things you

should check before calling the service

man. If you need further help, call your

Hoover Dealer or Hoover Factory Branch

Service Station listed on the service page.

Check

Nozzle

Hose

The nozzle hose on the cleaner carries

the dirt from the nozzle to the throw-

away bag. If an object lodges across the

entrance of the hose, remove bottom

plate (see Page

II),

pull hose from

cleaner and remove object. Replace

hose, making sure that metal collar is

lodged completely inside the hose

connection. Then replace bottom plate.

If hose is clogged as a result of the

Check

Nozzle

Hose

(cont.)

throw-away bag being full of fluff from a new carpet, put a new

throw-away bag on the cleaner. Then place handle in storage

position, turn cleaner on, and move lever on Suction Control Dial

back and forth. This will clear the hose.

Check

Secondary

Filter

The secondary filter protects the

motor from dirt. Before installing a

new bag, check the filter. Dirt

spilled in the bag housing will

accumulate on the filter and may

restrict motor performance. To clean

filter, remove wire holder and lift

out filter. Tap against a hard sur-

face, or rinse thoroughly with warm

water and dry. Replace in bag

housing and secure with holder.

Check

Bag

(See

Below.) 4.

Check

Belt

(Page 11.)

Check

Agitator

Brushes (Page 12.)

THE THROW-AWAY BAG

To assure that your Hoover cleaner operates at

peak performance it is imperative that you use

only genuine Hoover Throw-Away Filter Bags

made by The Hoover Company. Genuine

Hoover bags can be identified by the

Hoover Medallion. These bags are made

from a special material which is

scien-

OOJf

tifically formulated to filter out dust

while allowing air to flow through freely.

The use of other than genuine Hoover bags

voids your guarantee !

WHEN

REPLACE

THE

BAG

Check the bag from time to time. When bag is

approximately three-fourths full of dirt, it should

be changed. If you let more dirt than this accum-

ulate, your cleaner will not operate efficiently.

Be sure that throw-away bag is not extending

outside of cover and that cover is in proper

position on the gasket before latching.

REPLACE

THROW-

AWAY

BAG

Tip cleaner over, resting handle on

the floor. @pen bag cover of cleaner

by turning latch in either direction.

Lift bag cover. Hold throw-away

bag by cardboard cover, twist out-

ward, and remove. Discard used bag.

To attach new throw-away bag, hold

bag with cardboard collar down and

with arrows pointing toward front of

cleaner. Push hole in cardboard

firmly over tube, twisting until bag

is secure. Be sure that throw-away

bag is not extending outside of cover

and that cover is in proper position

on the gasket before latching.

WHERE

BUY

BAGS

Keep a supply of Throw-Away Bags on hand. They may be

purchased at your local Authorized Hoover Dealer (listed in

in the Yellow Pages of your Telephone Directory under “Vac-

uum Cleaners”

Hoover) or from Hoover Factory Branch

Service Stations listed on the service page of this book.

WHEN ORDERING THROW-AWAY BAGS, BE SURE TO MEN-

TION THE MODEL OF YOUR CLEANER.

THE BELT

WHEN

REPLACE

THE

BELT

Remove bottom plate from cleaner

(see Fig,

and check from time to

time to be sure the belt is in good

condition. If it is stretched or cut,

it should be replaced.

Inhaltsverzeichnis

Andere Hoover Staubsauger Handbücher

Hoover

Hoover Air cordless Bedienungsanleitung

Hoover

Hoover HandVac Bedienungsanleitung

Hoover

Hoover Brave Bedienungsanleitung

Hoover

Hoover Z Bedienungsanleitung

Hoover

Hoover CAPTURE Bedienungsanleitung

Hoover

Hoover MPWR 40V CH93619 Bedienungsanleitung

Hoover

Hoover PUREPOWER Bedienungsanleitung

Hoover

Hoover FREEJET 3in1 FJ120R2 Bedienungsanleitung

Hoover

Hoover BH70705 Bedienungsanleitung

Hoover

Hoover F8100900 - Platinum Carpet Cleaner Bedienungsanleitung

Hoover

Hoover FloorMate, SpinScrub Floor Mate Spin Scrub Hard Floor... Bedienungsanleitung

Hoover

Hoover UH70060RM Bedienungsanleitung

Hoover

Hoover CH82 Bedienungsanleitung

Hoover

Hoover S5620 Bedienungsanleitung

Hoover

Hoover UH71250 Bedienungsanleitung

Hoover

Hoover WindTunnel U5471-900 Bedienungsanleitung

Hoover

Hoover Rapide Ultra HW90-RU-ZA Bedienungsanleitung

Hoover

Hoover SH40040 Bedienungsanleitung

Hoover

Hoover HF522NPW 011 Bedienungsanleitung

Hoover

Hoover ELITE FH50251 Bedienungsanleitung

Hoover

Hoover Jive DRY Bedienungsanleitung

Hoover

Hoover Dubl-Duty Bedienungsanleitung

Hoover

Hoover Commercial WindTunnel Bedienungsanleitung

Hoover

Hoover Turbo EmPower 4600 U5268900 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch