Hoover Turbo EmPower 4600 U5268900 Bedienungsanleitung

um C

O_ner_s Manua|

ENGL|SH -_ pp° 1°12

ESPANOL -_ pag, 13-20

FRANGAIS -_ p, 22-28

Read this _anua! before

operating cleaner

www.hoover.com

Thank yeu fer cheesing a HOOVER®

PJease enter the COMPLETE model and serial numbers in the spaces provided.

The numbers are Jocated on the bottom of your cJeaner.

Modem

Seda[ number

Hint: Attach your saJes receipt to this owner's manual

Verification of date of purchase may be required for warranty service

of your HOOVER product.

Be sure to film out and return the product registration card included with your

cJeaner (see back cover).

Getting Started ...................................... 3

How to use ............................................ 4

Cleaner Description .......................... 4

Cleaning TooJs .................................. 6

If You Have aProbJem ........................ 11

Clearing B!ockages .................... 11o12

Important Safeguards .......................... 2

Maintenance

Authorized Service .......................... 1!

Cleaning FHters .............................. 7°8

Emptying Dirt Cup ............................ 7

Lubrication ...................................... 10

Replacing Agitator Brush Roll ...... 10

Replacing Belt .............................. g-10

Replacing Headlight .......................... 8

Thermal Protector .............................. 10

Warranty .............................................. 12

_,_n_SN.hoover, co m

J! Safeg

When using an eJectrica{ appJiance, always foJJow

basic precautions, including the following:

READ ALL iNSTRUCTIONS BEFORE USING THiS APPLIANCE

m To reduce the risk of fire, eJectric shock, or injury:

Do not use outdoors or on wet surfaces.

Close supervision is necessary when any appliance is used by or near children.

Do not allow vacuum cleaner to be used as a toy or to run unattended at any time.

Keep hair, loose c_otbing, fingers, feet and aH parts of body away from openings,

rotating agitator and other moving parts. Do not operate cJeaner in bare feet or

when wearing open toe shoes or sandaJs.

Do not pick up anything that is burning or smoking, such as cigarettes, matches, or

hot ashes.

Do not use to pick up fiammabte or combustible matedaJs such as gasoline or fine

wood sandings or use in areas where they may be present.

Avoid picking up hard, sharp objects with the cJeaner. They may damage the

cJeaner,

AJways turn off this appJiance before connecting or disconnecting hose.

Do not use without dirt cup or fiJters in pJace. Empty dirt cup and cJean fiJters freo

quentJy when picking up very fine materiaJs such as powder.

Use extra care when cJeaning on stairs.

Do not put any object into openings. Do not use with any opening bJocked; keep

free of dust, Jint, hair, or anything that may reduce air flow.

Do not pull or carry by cord, use cord as a handJe, dose door on cord or pull cord

around sharp edges or corners. Do not run appJiance over cord. Keep cord away

from heated surfaces.

AJways disconnect cord from eJectdcaJ outJet before servicing the cJeaner.

*UnpJug cJeaner when not in use. Turn off aJJcontroJs before unpJugging.

* Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Never

handJe plug or appJiance with wet hands.

* The use of an extension cord is not recommended.

* Do not use with damaged cord or pJug. Jf appJiance is not working as it should, has

been dropped, damaged, Jeft outdoors, or dropped into water, take it to a Hoover

Factory Service Center or Authorized Hoover Warranty Service DeaJer (Depot).

* Use vacuum cJeaner onJy for its intended use as described in the instructions.

Use onJy attachments recommended by The Hoover Company; others may cause

hazards.

If you need any assistance:

Visit our webske at www.hoover.com, Click on the "Service" button

to find the service outlet nearest you OR

Call 1o800o944o9200 for an automated referral of service outlet

locations (U.S. only) OR

Call 1=330=499=9499 to speak with a representative in our Consumer

Response Center.

Please do not return this product to the store.

Carton contents

*Packed inside

extension wand

Your cleaner ce_es fu|ly

assembled with the

reels and hese stered en

Remove any tape or packing material

from the cleaner.

A. Cleaner

B. Hose, cmeaning tools and wands

(packed on cleaner)

Usincj fold dowrl hand|e

Raise upper handle (A) to upright posi-

tion until it locks in place. Press upper handle release button (B)

back to fold handle to storage position. Cerd clip

To help keep the cord out of the way

while cleaning, position cord into cord

clip (C).

Continued _3

Cleaner description

1. Folding handle 15, Hose

2. Upper handle release l& Furniture nozzle

button 17. Dusting brash

3. Power Boost Switch 18. Extension wand

4. Dirt cap latch 19. Crevice wand: stores

5. Carrying handle inside wand

6. Preofi[ter 20. Cord hooks: wrap

7. HEPA filter (inside filter cord around hooks for

chamber) storage. The top hook

8. Dirt cap (Twin Chamber) rotates to the left for

g. Dirt cap lid easy cord release.

10. Headlight 21. ONoOFFoHUSH TM

switch: located on

11. Stair cleaning handle: front of cleaner body

located above the

headlight.

12. Hood Operate cleaner only at

13. Carpet height adjustment voltage specified on

knob: rotate knob to cot- data plate on bottom of

rect setting for height of cleaner.

carpet being cleaned.

14. Handle release pedal: This cleaner is intended

step on pedal to lower for household use.

handle to operating or low

positions.

Pe[arized plug

Toreduce the risk of electric shock, this

appliance has a polarized plug (one

blade is wider than the other). This plug

will fit in a polarized outlet only one way.

Ifthe plug does not fit fully in the outlet,

reverse the plug. If it still does not fit,

contact a qualified electrician to install the

proper outlet. Do not change the plug in

any way.

HOSe C@nn¢Ctt@n

Hose must be attached to cleaner base for

floor cleaning.

Toattach hose, use the end of the hose to

push the cover (A) down and push hose

onto opening.

Twist hose end slightly to tighten the con-

nector.

O@-OFF-HUSH TM

Hug cord into electrical outlet.

Toturn cleaner ON, push switch (B) up.

Toturn cleaner OFF, push switch to middle

position.

For quieter vacuuming, push switch to

'HUSH' (down) position.

Pat Power Boost Switch in neutral when

using ON or HUSH setting.

Power Beest Switch

Use the Power Boost Switch (C) to add

extra cleaning power for cleaning heavily

soiled areas and for picking up dry debris

spills.

Push the switch forward for a temporary

boost. When released, the boost will auto-

matica[[y go to the "neutral" position.

Push the switch back to lock it in the Boost

position. To unlock, push the switch for-

ward to the "neutral" position.

Use the lock position for larger areas or

when using the cleaning tools.

The Boost can be used with either the ON

or HUSH mode selected (see Fig. 2-3).

Pat Power Boost Switch in neutral when

using ON or HUSH setting.

Handle positions

The handle of your cleaner has three posi-

tions; upright when using cleaning tools;

operating position for general operation

on carpet and floors; low for reaching

under low furniture. Step on handle release

pedal to lower handle.

Transper! ing cJeaner

Put handle in upright position. Tilt

cleaner back on rear wheels. Push

forward.

Carpet height

The cleaning of carpet and rugs takes

place at the nozzle (D).

When it is necessary to raise and lower the

nozzle for various carpet pile heights, turn

the carpet height adjustment knob (E) to

the desired setting.

For ease in turning the knob, place handle

in upright position.

Nozzle won't move to adjusted position

until handle is lowered to operating

position.

Settings

Some models have 3 settings, others have

5=For both types, the following recommen-

dations apply.

For maximum cleaning performance,

the following carpet height settings are

recommended.

Low setting: for all types of carpet and

hard floors.

Note: If the cleaner is difficult to push,

rotate knob to the next higher setting.

Medium and Nigher settings: for deep-

er pile carpet where easier pushing effort

is desired, while maintaining good clean-

ing performance.

CJeaning |ightweight

fiexibJe rugs

Stand on one end of rug and move

cleaner toward other end or edge.

Before reaching edge, push down on

handle. This will lift up the nozzle (front

of cleaner) as shown and will prevent

rug from clinging to cleaner. Continue to

lift up nozzle so that when you have

reached the edge, it is completely off

the rug= Move cleaner back to start

again, lower nozzle, and use only for-

ward strokes.

Continued ,,_ 5

Stair cleaning

A stair cleaning handle has been

designed for ease in using your cleaner

on stairs. With handle in operating posi-

tion, place fingers under edge of stair

cleaning handle and guide cleaner with

other hand on upper handle.

As an alternative, you may use the hose

and furniture nozzle for stair cleaning.

Clean from bottom to top.

When using cleaning tools, the agita-

tor will continue to rotate.

CAUTION: To avoid personal injury or

unnecessary wear to carpet, and to

prevent the cleaner from falling,

always place it at the bottom of the

stairs.

Cleaning tools

Tools allow for cleaning surfaces above

the floor and for reaching hard to clean

areas.

The cleaner is ready for tool use when

handle is in upright position.

For best tool performance, set the ON-

OFF-HUSW Mswitch to ON and set the

Power Boost Switch to lock.

CAUTION: Agitator continues to

rotate while cleaner handJe is in

upright position. Avoid tipping clean=

er or setting it on furniture, fringed

area rugs or carpeted stairs during

tool use.

H f__--------

SeJect preper too|

R Dusting brush may be used for

carved furniture, table tops, books,

lamps, lighting fixtures, venetian blinds,

baseboards, shutters, and registers.

G. Furniture nozzb may be used for

upholstered furniture, draperies, mat=

tresses, clothing, automobile interiors,

and carpeted stairs.

H. Crevice wand (stores inside exten-

sion wand) can be used in tight spaces,

corners and along edges in such places

as dresser drawers, upholstered furni-

ture, stairs and baseboards. It can also

be used for extra reach with the dusting

brush and/or extension wand.

LExtension wand is used to give extra

length to your hose. Use it with any of

the above tools.

Rcn'l@ve h@$¢

When using cleaning tools, cleaner

handle should be inthe upright posi=

tion. Also, turn cleaner OFF before

disconnecting and connecting the

hose (J}.

Remove hose end from cleaner base.

Attach wand and reels

The tools are attached to the hose or the

wand in the same manner.

Push tool firmly onto hose; twist tool slightly

to tighten or loosen connection.

Attach second wand or tool to the wand in

the same manner.

RepJacincj hose

When you are finished cleaning with the

tools, use the end of the hose to push

the cover (K) down and push hose onto

opening.

Twist hose end slightly to tighten the

connector.

Hose must be connected to cleaner

base for floor cleaning.

Extra reach hose

The extra reach hose provides easier

cleaning of stairs and hard to reach

places. Follow the steps below for attach-

ing and detaching hose.

Turn cleaner OFF before disconnecting

and connecting hose.

Remove hose end from cleaner base.

Align end of extra reach hose with projec-

tions (L) with slots (M) on end of attached

hose.

Slide hose into slots and twist hose to

lock it into place. (To detach hose,

reverse procedure.)

Attach wands or tools to the other end of

hose.

How to €Jean tooJs

To clean the hose, wipe off dirt with a

cloth dampened in a mild detergent.

Rinse with a damp cloth,

Cleaning tools may be washed in warm

water with a detergent. Rinse and air dry

before using,

Familiarize yourself with these home

maintenance tasks as proper use and

care of your cleaner will ensure contin-

ued cleaning effectiveness.

Dirt cup

The dirt cup assembly consists of the

following parts:

Lid (A)

Dirt cup (B)

Pre-filter (C)

HEPA cartridge filter (D)

Dirt inlet opening (E)

While the cleaner is in operation, the pr÷-

filter screen will stop larger debris from

entering the HEPA cartridge filter chamber.

This larger debris will be seen collecting in

the left side of the dirt cup, The HEPA car=

tridge filter will collect fine particles that

have passed through the pre-filter screen.

When to e_pty

It is recommended that the dirt cup be

emptied before the dirt reaches the dirt

inlet opening on back of dirt cup (Fig. 3=

1) or after every use if preferred.

CAUTION: Very fine materials, such

as face powder or cornstarch, may

seal the filter and cause loss of suc-

tion. When using the cleaner for this

type of dust, empty the cup and clean

the filters often.

How to e_pt:y

Turn cleaner off and ailow motor to

stop completely.

Disconnect cleaner from emectrical

outlet. Do not use the cleaner without

dirt cup or filters in place.

Press dirt cup latch (F) and remove dirt

cup,

| , ,,\ ,

Remove lid.

Note: It is not necessary to remove the

HEPA cartridge filter to empty the dirt

cup=

Tap side of cup until no more dust parti-

cles fall from the HEPA cartridge filter.

Replace dirt cup lid=

Place bottom of cup into cleaner= Pivot

cup and snap into place.

Bottom of cup will rest behind grooves at

bottom of cleaner cavity (G)=

Press latch down.

Continued _7

FiJter asse b|y

The HEPA filter and pre-filter screen are

essentially self-shedding,

Tapping the side of the dirt cup as

described in "How to empty dirt cup"

should sufficiently remove dust and fine

particles from the HEPA filter and pre-fiF

ter.

The filter assembly can also be removed

for additional cleaning.

How to c_ean fi_ter

assembly

Remove dirt cup and dirt cup lid as

described in "How to empty dirt cup",

Grasp pre-filter frame (H) and pull up

firmly, Slide filter assembly out of cup,

_l I/ .

iI _i iX>7._- J

_II', !/ _ /!i77 -_ - _.

l ll,'l ///7/ _

,' _f'/!l /

'II

ii I ,p_

I] , //}/

Ill XJ I]/ji/_,

Grasp end of cartridge filter and gently

pull it away from pre-filter. Remove car-

tridge from assembly.

The pre-filter can be cleaned with a

brush and then rinsed with water. Allow

pre-filter to dry thoroughly.

1 \,_-c# -_

_-_ IiI i/i J ,

.... I i )

!j! /

II _ I'

Iiiii I )

It is recommended that the HEPA car-

tridge filter be cleaned by tapping either

of the ends until no more dust particles

fall from the filter. DO NOT tap the soft,

pleated sides of the filter. It could

damage the filter.

Do not rinse or wash the filter.

To re-assemble the filter assembly,

place large knob of cartridge filter in

hob on bottom of pre-filter,

Snap top of cartridge filter into place.

Align grooves (I) on pre-filter frame with

ribs (J) in dirt cup,

Slide filter assemby down into cup until

a light snap is felt, Gently pull up on

assembly to ensure that it is seated

properly in the cup, Ensure that no part

of pre-filter screen extends above top

edge of dirt cup,

Replace lid and return cup to cleaner

(Fig. 3-4).

ii // /

iii/

....i

The final filter assists in returning clean

air to the room.

Using a screwdriver, remove the two

screws as shown and lift off lens,

Lift out filter (K) and hand wash in cold

water with a mild detergent.

Let filter air dry then reposition. Replace

lens and screws.

Should you want to replace this filter, ask

for HOOVER part no, 387'65024 (filter

package part no. 40110004),

Do not operate cleaner without any of

the filters in place.

Re_@velens -Disconnect cleaner

from electrical outlet,

Using a screwdriver, remove the two

screws as shown and lift off lens.

|nstaUU buUb - Pui[ old bulb straight

out of socket. Push new bulb straight

into socket until locked in place. Do not

twist bulb.

Excessive force is not required.

RepUaee Uens - Reposition lens (L)

and secure with the two screws.

Belt replacement

The belt on your Hoover cleaner causes

the agitator to rotate and is important for

the effective operation of the cleaner.

The belt is located under the hood of the

cleaner and should be checked from

time to time to be sure it is in good con-

dition.

When to replace

Disconnect cleaner from electrical

outlet.

Tocheck belt, remove hood and agitator

cover as shown in Figs. 3-16 through 3-

19. Replace belt if it is stretched, cut or

broken.

What to buy

Toassure effective operation, use only

genuine HOOVER belts with your

cleaner. When purchasing a new belt,

ask for HOOVER part No. 38528040

(belt package part no. 40201 I90).

Hew to replace

Disconnect cleaner from electrical

outlet,

With the handle in the upright position,

tilt cleaner back until it rests on floor,

Remove the 2 screws near the front of

the brush roII cavity,

Press on handle release pedal (A) and

lower the nozzle so it is flat,

Remove hose end (Fig, 2-13).

Remove 2 screws at rear of hood,

Lift hood off cleaner, Remove the 2 screws behind the

agitator cover.

Remove agitator cover (B).

Remove agitator and used belt.

Discard used belt.

Continued _ 9

With lettering to the outside of belt, slide

new belt along side of cleaner cavity

and over motor pulley (C).

Insert agitator through belt and place

belt in belt guide (D). Grasp agitator firmly and fit it into posi=

tion by first sliding end opposite the belt

into the rectangular slot (E) on side of

cleaner.

Pull other side of agitator (F) into place.

Turn agitator, making sure belt is not

pinched between agitator and cleaner

body. The belt must rotate freely inside

the belt guide. If the agitator does not

turn, reposition belt in the belt guide.

Replace agitator cover (B) and 2

screws. Replace hood, 2 screws and hose, Raise nozzle up and replace the 2

screws on the bottom.

The agitater brush roll

When to replace

When agitator brushes are worn, the

agitator should be replaced.

qb check condition of brushes, discon-

nect cleaner from electrical outlet.

Move edge of a card across bottom

prate while turning agitator. To maintain

cleaning effectiveness, replace agitator

if brushes do not touch card.

What to buy

VVhen purchasing a new agitator, ask for

HOOVER part no. 48414130.

How to replace

Disconnect cleaner from electrical

outlet.

Remove hood and agitator cover as

described in the "Belt replacement"

section.

Discard old agitator.

Continue following the directions in the

'Belt replacement" section to replace

belt, new agitator, agitator cover and

hood.

The motor is equipped with bearings

that contain sufficient lubrication for the

life of the motor. The addition of lubricant

could cause damage. Therefore, do

not add lubricant to motor bearings.

The agitator brush roll is equipped with

two ball bearings that should be lubri=

cated periodically by a Hoover Factory

Service Center or an Authorized Hoover

Warranty Service Dealer (Depot).

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hoover Staubsauger Handbücher

Hoover

Hoover SteamVacuum Bedienungsanleitung

Hoover

Hoover KS60H&CAR 011 Bedienungsanleitung

Hoover

Hoover Soft Guard C1414-900 Bedienungsanleitung

Hoover

Hoover FloorMate Edge Bedienungsanleitung

Hoover

Hoover TurboPOWER Bedienungsanleitung

Hoover

Hoover C2094 - Portapower Commercial Vacuum Cleaner Kurzanleitung

Hoover

Hoover Impulse Bedienungsanleitung

Hoover

Hoover UH72450 Bedienungsanleitung

Hoover

Hoover DM71DM02 Bedienungsanleitung

Hoover

Hoover 48033778 Bedienungsanleitung

Hoover

Hoover FloorMate SpinScrub 800 Bedienungsanleitung

Hoover

Hoover POWER DRIVE Bedienungsanleitung

Hoover

Hoover Breeze BR40PET Bedienungsanleitung

Hoover

Hoover ch20100 Bedienungsanleitung

Hoover

Hoover SteamVac C3820 Bedienungsanleitung

Hoover

Hoover Hooverette 2944B Bedienungsanleitung

Hoover

Hoover SteamVac Commercial Spotter/Carpet Cleaner Bedienungsanleitung

Hoover

Hoover U5786-900 Bedienungsanleitung

Hoover

Hoover Syrene Bedienungsanleitung

Hoover

Hoover SM96WD4 Bedienungsanleitung

Hoover

Hoover Windtunnel UH70120 Bedienungsanleitung

Hoover

Hoover SPRINT EVO Bedienungsanleitung

Hoover

Hoover Guardsman C1415 Bedienungsanleitung

Hoover

Hoover Turbo EmPower 4600 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch