Hoover Spirit S3503 Bedienungsanleitung

HOOVER,

splnl

bed

Owner’s

Manual

Fill in and retain!

The vacuum cleaner you have just purchased is a combination

cleaner. It has a motorized power nozzle for carpet and floor cleaning

and tools for other tasks.

The model and serial number appear on the bottom of the cleaner.

For your personal records, please enter the COMPLETE model and

serial number in the spaces provided below and retain in a safe place.

Your cleaner is model

and has serial number

It is suggested that you attach your sales receipt to this owner’s

manual. Verification of date of purchase may be required for warranty

service of your Hoover product.

Save!

Index

Assembling Cleaner.

...........

.5-6

Cleaner Description.

...........

.3-4

Energy Saving Tips

.............

.I8

How to Use

Cleaning Tools. .............

.8-9

Power Nozzle. ................ .7

Suction Regulator. ............ .7

To Clean Stairs.

............... .9

If You Have a Problem ..........

.I7

Important Safeguards........... .2

Lubrication

....................

.I8

Maintenance

Cleaning Secondary Filter.

....

.I2

Clearing Obstructions

.........

.I2

Replacing Agitator Brushes

and Brush Roll ..........

.15-16

Replacing Bag

.............

.lO-11

Replacing Belt. ...........

.13-15

Service.. ....................

..I

Storage. ......................

.I0

1988

The

Hoover Company

Important

Safeguards!

l Read all instructions before using this appliance.

l Warning: Electric shock could occur if used outdoors or on wet

surfaces.

lClose supervision is necessary when any appliance is used by or

near children. Do not allow vacuum cleaner to be used as a toy or to

run unattended at any time.

Keep hands, feet, loose clothing, and hair away from rotating

agitator. Do not operate the cleaner in bare feet or when wearing

open toe shoes or sandals.

lDo not pull or carry by cord, use cord as a handle, close a door on

cord or pull cord around sharp edges or corners. Do not run

appliance over cord. Keep cord away from heated surfaces.

Do not use cleaner to pick up matches, or live ashes and cigarette

butts.

Never vacuum in the presence of flammable or combustible liquids

or fumes.

l The hose contains electrical wires. Do not use if damage, cut, or

punctured.

l Avoid picking up hard, sharp objects with the cleaner. They may

damage the cleaner and the bag.

Always turn off this appliance before connecting or disconnecting

either hose or motorized nozzle.

Unplug cleaner when not in use. Turn off all controls before

unplugging.

l Always disconnect cord from electrical outlet before servicing the

cleaner.

l Change bag frequently when picking up very fine materials such as

powder. Do not use without dust bag and/or filters in place.

Use extra care when cleaning on stairs.

Grasp the plug to disconnect from wall outlet to avoid damage to

cord, plug, prongs, or receptacle. Never handle plug or appliance

with wet hands.

lIf cleaner has a cord reel, hold on to the plug while cord is being

rewound to prevent cord from whipping.

l The use of an extension cord is not recommended.

Do not use with damaged cord or plug. If appliance is not working

as it should, has been dropped, damaged, left outdoors, or dropped

into water, take it to a Hoover Factory Service Center or Authorized

Hoover Warranty Service Dealer.

lUse vacuum cleaner only for its intended use as described in this

owner’s manual. Use only attachments recommended by The

Hoover Company; others may cause hazards.

Unpacking

Unpack the cleaner from the

carton and identify the parts

shown. Remove and dispose of

the cardboard packing.

A. Canister cleaner

B. Power nozzle

C. Throw away bag

D. Extension wands and hose

The cleaner assembled will

look like the drawing below.

1. Tool storage tray:

provides internal tool storage for crevice tool,

furniture nozzle, and dusting brush.

2. Crevice tool

3. Furniture nozzle

4. Dusting

brush

5. Cover: remove by lifting up top section of carrying handle and

pulling forward.

6. Carrying handle

7. Extension wands:

use with power nozzle. If added length is desired

when using cleaning tools, add one or both wands to hose.

8. Spring latch:

locks extension wands together or locks wand to

nozzle or tool.

Power nozzle:

automatically adjusts to different carpet pile heights.

10.

Large

wheels:

provide easy towing, when hose is used to pull

cleaner over carpet, area rugs and door sills.

11. ON-OFF control:

located on top of cleaner for convenient foot

operation.

12. Cord rewind control:

step on control to rewind cord for storage.

Hold plug until cord is rewound.

13. Cord clips:

fasten nozzle cord to extension wands.

14.

Receptacle:

connect power nozzle cord underneath hand grip.

15. Hand grip

16. Suction regulator:

close for maximum suction; open if power nozzle

is difficult to push on some carpet or if lightweight rugs or draperies

are being cleaned.

17. Plastic latch ring:

rotate to lock hand grip to extension wands or

cleaning tools.

Operate cleaner only at voltage specified on data plate on bottom of

cleaner.

How to assemble

1. Connect hose

Insert hose end with cord into

opening of cleaner, lining up

largest projection on hose with

largest notch of opening. Turn

hose to the right to tighten.

When hose is attached properly,

hose cord plug will reach to

receptacle on cleaner.

Insert plug as deeply into the

receptacle as possible.

To disconnect hose, first remove

hose cord plug from receptacle.

Then, depress latch and turn

hose to the left.

2. Attach power nozzle

and extension wands

Attach wand to power nozzle by

fitting button projection on

nozzle connector into opening

near end of wand. Be sure nozzle

is locked in place.

To release, press down on center

of latch and remove nozzle.

HOSE CORO

PLUG

Attach second wand to the first.

Position cord into cord clips on

wands, placing excess cord

between nozzle and bottom cord

clip.

To attach hose to wands, rotate

plastic latch ring on hand grip

until slots in opening align.

Push hand grip over wand so that

button projection fits into slot.

Turn latch ring to lock wand in

place.

Reverse this procedure to remove

wands.

Push plug on power nozzle cord

completely into receptacle

underneath hand grip.

Always disconnect cleaner from

electrical outlet before attaching

or removing power nozzle plug.

How to use

Power nozzle

The power nozzle adjusts automatically for cleaning hard surface floors

and various heights of carpet.

The agitator may be turned off by

unplugging power nozzle cord from hand grip when cleaning irregular

floor sutfaces such as brick, slate, and certain parquet floors.

This will

stop the agitator from rotating. If desired, a special Wall/Floor Brush

(shown in Cleaning Tools section) can be purchased for this task.

Handle positions

The handle has two positions

when used with the power

nozzle:

upright

and

operating.

To lower handle to operating

position, place your foot on the

power nozzle and push handle

down.

Edge cleaning

Brushed

edge cleaning is

provided on the right side of the

nozzle to remove imbedded dirt

in carpet near baseboards and

furniture.

Standard

edge cleaning is

provided on the left side of the

nozzle to remove surface dust

and litter.

Guide right or left side of nozzle

along edge of carpet for type of

edge cleaning desired.

Suction regulator

The suction regulator is located

on the hand grip and may be used

to increase or decrease suction

for various cleaning tasks.

If power nozzle is difficult to push

on some carpet, open suction

regulator. This will prevent

damage to the belt.

Cleaning Tools

The three small cleaning tools are

stored on a tray underneath the

cover. Remove cover by lifting

top section of carrying handle

and pulling forward.

Select proper tool

The cleaning tools have many

uses. Select the tool best suited

for the cleaning task from the

descriptions below.

The Wall/Floor Brush, also

shown, is available at a nominal

cost from your Authorized

Hoover Dealer, a Hoover Factory

Service Center or by writing to

The Hoover Company, North

Canton, Ohio 44720.

Adjust the suction regulator to

select the amount of suction

appropriate to the cleaning task.

1. Crevice tool

may be used for

radiators, dresser drawers, spaces

between kitchen equipment.

2. Furniture nozzle

may be used

for upholstered furniture, draper-

ies, tapestries, mattresses, cloth-

ing, automobile interiors and

carpeted stairs.

3. Dusting brush

may be used

for carved furniture, table tops,

books, lamps, lighting fixtures,

Venetian blinds, baseboards,

shutters and registers.

“4.

Wall/floor brush

may be

used for walls and very irregular

hard surface floors such as brick

and slate.

*Available at additional cost.

To connect and

remove tools

To connect tools, insert end of

tool into extension wand and

snap into position. To disconnect,

press down on the center of the

spring latch and remove tool.

Tools may be attached to hand

grip by rotating plastic latch ring

until the slots in the opening

align. Insert tool and turn latch

ring, as shown, to lock tool in

place.

To remove tool, reverse the

above procedure.

The power cord leading from hose

connection to receptacle on

cleaner base need not be con-

nected when using the cleaning

tools.

-However, to avoid

damage to cord, leave cord

connected to receptacle.

To clean stairs

Clean stairs by placing cleaner on

end as pictured in the illustration.

Clean stairs from bottom to top.

Inhaltsverzeichnis

Andere Hoover Staubsauger Handbücher

Hoover

Hoover U5472 Bedienungsanleitung

Hoover

Hoover FM216LI Bedienungsanleitung

Hoover

Hoover Impulse H2510 Bedienungsanleitung

Hoover

Hoover UH72460 Bedienungsanleitung

Hoover

Hoover SteamVac Dual V Bedienungsanleitung

Hoover

Hoover Telios TTE2203 Bedienungsanleitung

Hoover

Hoover Vacuum cleaner Bedienungsanleitung

Hoover

Hoover SmartWash FH52001 Bedienungsanleitung

Hoover

Hoover Wet/Dry Vacuum cleaner Bedienungsanleitung

Hoover

Hoover SteamVac TurboPOWER F5893-900 Bedienungsanleitung

Hoover

Hoover Ultra Bedienungsanleitung

Hoover

Hoover POWER SCRUB XL Bedienungsanleitung

Hoover

Hoover HE721PAF 011 Bedienungsanleitung

Hoover

Hoover FloorMATE FloorMATETM The Hard Floor Cleaner Bedienungsanleitung

Hoover

Hoover PUREPOWER Bedienungsanleitung

Hoover

Hoover H-PURE 700 STEAM Bedienungsanleitung

Hoover

Hoover DIAL-A-MATIC 1170 Bedienungsanleitung

Hoover

Hoover HWD35MAX Installationsanleitung

Hoover

Hoover S5629080 Bedienungsanleitung

Hoover

Hoover Robo-com 2 Bedienungsanleitung

Hoover

Hoover CHORUS Bedienungsanleitung

Hoover

Hoover SI216RB Bedienungsanleitung

Hoover

Hoover WINDTUNNEL 3 HIGH PERFORMANCE PET Bedienungsanleitung

Hoover

Hoover FloorMate SpinScrub 800 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch