Hoover SteamVac supreme Bedienungsanleitung

SUPREME

DELUXE

ULTRA

SteamVac TMWith Attached

Tools And Automatic Tool

Conversion

SteamVacs with the automatic tool conversion

feature were first introduced in mid-1997. Fig. 1

Characteristics of the three types:

Supreme: No rotating brushes

Deluxe: Five rotating brushes (for carpet only).

Ultra: Five rotating brushes for carpet and a

powered hand nozzle for upholstery.

These are the third generation of Steam Vats made

by Hoover for the domestic market.

5 OUNCES/

15Oral Easy,One-handed

tankremoval

liJ

All models have:

• 1 gallon tanks, solution and recovery

• 8 foot hoses

• Quick cord release (back of handle)

• Tool/floor mode indicator Fig. 2

• Automatic tool conversion

• 16 oz. pre-cleaner-spray bottle

• 16 oz. carpet/upholstery detergent

• Bare floor cleaning tool, fits front of nozzle. Fig. 3

• Upholstery nozzle

• 1 Speed motor

• Measuring eup/eap on solution tank.Fig. 4

• Over flow float in recovery tank

• Foot operated on and off switch

• One handed recovery tank removal. Fig. 5

10/97

TURBINE _-

BRUSIt BLOCK

J._ E:t

ELECTRICAL SYSTEM

Deluxe and Ultra models have 5 mlcllocking rotating

brushes. Fig. 6

Tile brushes are driven by an air pOWeled turbine

Fig. 7

Rotation of tile brush can be viewed though a cleai

cover on the hood. The Speed of the brush depends

on air flow and is adjustable for Lo or Hi rotation or

can be turned off completely as might be desired

when cleaning bare floors. Fig. 8

There are 3 major systems in Steam Vacs:

1. Electrical

2. Distribution

3. Recovery

The Electrical System - Fig. 9 consists of the

power supply cord, motor and on/off switch. Close

the switch, the motor runs and provides suction for

recovery at the floor or the upholstery tool. It also

generates air flow to drive the turbine to rotate the

brushes at the floor and in the powere d wand plus

drive the pump to force solution to the upholstery

tool.

The Distribution System - Fig. 10 When the solu-

tion tank is placed on the unit, a valve in the tank

opens and fills the reservoir and the tube leading to

the pump. With the unit turned on and the handle in

the upright position, the pump runs and sends water

to the wand for above the floor cleaning Fig. 10A

SUN TEA VALVE

RESERVOIR

I0197

DISTRIBUTION SYSTEM

CAP

SOLUTION

,TANK

POPPET

PLUNGER

/SLIDE

VALVE

__ MOTOR

•PUMP

_TURBINE

MOTOR

€

)

ROTATING

BRUSHES

When the handle is lowered to tile operating positiot,

the pump shuts off and the floor brushes (5) start to

rotate (unless turned off manually) Fig. 10B

When the trigger on the handle is depressed, a solu-

tion valve in tile reservoir is opened and water flows.

to the rotating brushes.

Tile Recovery System. Recovery from tile floor is

shown in Fig. 11 With the handle in the operating

position, the pump is off and the valve to the tools

closed. All suction is at the floor nozzle.

Recovery at the upholstery tool is shown in Fig. 12.

With the handle in the storage position the pump

runs, and the valve to the floor is closed diverting all

suction to the upholstery tool.

Key components of the SteamVac Ultra are shown ir

the cut away views on the next page.

Refer to the Hoover Service Manual for repair proce

dures and the Microfiche Parts Catalog, purple head-

er for spare parts.

TANK

RECOVERY

TANK LID

MOTOR

HOSE

MOTOR

DIRTY CLEAN

AIR - AIR

WATER

FRONT

FLOOR

VALVE

DIRTY CLEAN

AIR - AIR

WATER

PUMP

FLOOR

10/97

HOSE

SOIM_ON TANK

MEASURING

CI_/CAP SOLI.rrION

TRIGGER

CLEAN

TANK

HANDLE

RECOVERYTANK

HANDLE

TANK

SOLUTION

CONTROL

ROD BAREH.f)OR

TOOL

PUMP

BRUSH BLOCK

RESERVOIR

CORD

HOOK

ON/OFF PEDAL

10/97

FROM

PUMP

FROM

_-_ PUMP

10/9"/

SERVICE INSTRUCTIONS

CARPET CLEANING MACHINE

STEAMVAC

Service Support 10/97

Latch R H

Svatch Button

Duct

ISeal

Hose

•Actuator Arm

Motor Cover /

Valve Assembly

Seal

Motor

• Seal

Switch

Pedal

Attachment

Cord

Brush Bloct( Assembly Whee_

Hand_P°wered Tool_

Tool Holder

Upper Control Rod

Lower SWitChRod

S_alo Relief

Lower Handle

SolutionTube

Cover

Float ,Trigger

Recovery Tank Lid

Recovery Tank Foam F_ter

I. General

The SteamVac TM with Automated Tool

Conversion is a self contained extractor designed

for deep cleaning of carpet and rugs

These models feature the Automated Tool

Conversion actuated by the handle movement.

Mid line models include 5 rotating brushes for

carpet and bare floor agitation. While top end

models also include an air driven hand nozzle.

This instruction deals with top of the line models.

Instructions that pertain to low end models will be

noted.

II. Operation

The units are controlled by the on/off pedal

located on the LH. side.

ON/OFF

PEDAL

Solution is gravity fed to the floor from the

solution tank through the reservoir assembly to

the distributor/brushes.

ROTATING

BRUSHES

CLEAN SOLUTION

The reservoir is opened by actuating the trigger

in the handle.

Suction is directed to the floor through the smoke

colored nozzle and air duct. The suction air is

then drawn up through the valve and into the

recovery tank where the air and water are

separated, A float and foam filter prevent the

recovery tank from being overfilled.

The pump operates on the suction from the

motor. Suction is directed to the pump through

the pump duct (an integral part of the mainbody),

and is completed at the valve which is actuated

by raising the handle into the upright position.

The pump has a constant flow of solution from

the solution tank through the reservoir assembly.

The five rotating brushes are driven by a turbine,

which operates on the suction from the motor.

The recovery tank can be unlatched by rotating

the handle 90°and lifting out of position. To

empty tank continue rotating handle an additional

90° and lift lid from tank.

The Automatic Tool Conversion uses a valve

which diverts the suction from the nozzle to the

hose when the handle is placed in the upright

position.

III. Disassembly

A. Solution Tank

To remove, unlatch and pull tank assembly out of

position as illustrated (Fig. 1).

HANDLE

Fig. 1

Replaceable components of the tank assembly,

cap gasket and poppet valve.

B. Cap Assembly

1. Twist off to remove (Fig. 2)

Fig. 2

2. Slide gasket offto replace (Rib on gasket

faces toward cap).

C. Poppet Valve

1. Insert screwdriver through tank opening and

push valve until it snaps out of seat. (Fig. 3)

Fig. 3

2. Work valve stem out of tank from underneath.

3. The spring, brass washer and valve seal will

stay trapped in the valve seat. Remove through

tank opening.

Note position in Fig 3A.

Fig. 3A

SPRING.-._

WASHER7_

VALVESE*L--C

VALVE STEM -_

The cupped end of the valve seal faces

downward upon reassembly.

To reassemble valve:

1. Slide valve assembly into valve seat through

opening in bottom of tank (Fig. 4). Use a small

amount of soap on seal to ease assembly.

2. With small screwdriver, work rubber washer

into housing (Fig. 5).

3. Continue to slide shaft in until it stops.

4. Valve should spring open and closed when

fully seated.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hoover Staubsauger Handbücher

Hoover

Hoover UH70905 Bedienungsanleitung

Hoover

Hoover HT85-T3-ME Bedienungsanleitung

Hoover

Hoover DIAL-A-MATIC 1170 Bedienungsanleitung

Hoover

Hoover KS51PET 011 Bedienungsanleitung

Hoover

Hoover FloorMate Deluxe Bedienungsanleitung

Hoover

Hoover Soft Guard C1414-900 Bedienungsanleitung

Hoover

Hoover Chorus CH50PET 021 Bedienungsanleitung

Hoover

Hoover telios plus Bedienungsanleitung

Hoover

Hoover Portapower S1029-075 Bedienungsanleitung

Hoover

Hoover POWERDASH GO Bedienungsanleitung

Hoover

Hoover Convertible U4059 Bedienungsanleitung

Hoover

Hoover CH50015 Bedienungsanleitung

Hoover

Hoover S3410 Bedienungsanleitung

Hoover

Hoover dog & cat TURBO Bedienungsanleitung

Hoover

Hoover S3621 Bedienungsanleitung

Hoover

Hoover 120 V 60 HZ Bedienungsanleitung

Hoover

Hoover Slalom SL8123 Bedienungsanleitung

Hoover

Hoover ATHEN Bedienungsanleitung

Hoover

Hoover air lift Bedienungsanleitung

Hoover

Hoover Vacuum cleaner Bedienungsanleitung

Hoover

Hoover BH52120 Bedienungsanleitung

Hoover

Hoover HERITAGE 5110 Bedienungsanleitung

Hoover

Hoover SPOTLESS Bedienungsanleitung

Hoover

Hoover SteamVac Dual V Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch