Hoover Portapower S1029-075 Bedienungsanleitung

Fill in and retain!

The HOOVER vacuum cleaner you have just purchased is designed for

carpet and floor cleaning and has cleaning tools for above the floor

cleaning.

Yourcleanerisa model no.

and hasaserialnumber

For your personal records, please enter the model number and serial

number in the spaces provided above and retain in a safe place.

The model number and serial number are located on the bottom of the

cleaner.

Save!

Index

BlowerFeature............................~

Cleaner Description.

.....................

.8,4

Cleaning Tools.

.........................

$10

Edge Cleaning Feature.

..................... .8

How to Assemble.

....................... .5,8

How to Use Rug and Floor Nozzle.

.......... .7,8

How to Use Suction Regulator.

.............. .8

IfYouHaveaProblem

.....................

-18

Important Safeguards.

..................... .2

Lubrication

..............................

.I4

Maintenance

TheBag.................................ll

Secondary Filter

.........................

.I2

Replacing Brush on Rug and Floor Nozzle.

....

Storage..................................1

ToCleanStairs..

........................... .

1974The Hoover Company

Important Safeguards!

Read all instructions.

Warning: Electric shock could occur if used outdoors or on wet sur-

faces.

Close supervision is necessary when any appliance is used by or near

children. Do not allow vacuum cleaner to be used as a toy or to run

unattended at any time.

Do not use cleaner to pick up matches, or live ashes and cigarette

butts.

Avoid picking up hard, sharp objects with the cleaner. They may

damage the cleaner and the bag.

Unplug cleaner when not in use. Turn machine off at switch before

unplugging.

Always disconnect cord from electrical outlet before servicing the

cleaner.

Empty bag frequently when picking up very fine materials such as

powder.

Grasp the plug to disconnect from wall outlet to avoid damage to

cord, plug, prongs, or receptacle.

The use of an extension cord is not recommended.

If cleaner is in disrepair, do not attempt to operate.

Have repairs made by the qualified personnel at Hoover Factory Setv-

ice Centers or Authorized Hoover Warranty Service Dealers.

Use vacuum cleaner only for its intended use as described in the in-

structions. The use of attachments not recommended by the ap-

pliance manufacturer may cause hazards.

Save

these

instructions!

DOUBLE INSULATED:

P%z%s

En-ll~ae

Participation

When servicing use only identical replacement parts.

This cleaner has the safety equivalent of a grounded wiring system

plus the convenience of a

two

wire system.

This cleaner meets Occupational Safety and Health Act (OSHA-29

CFR 1910 Subpart

requirements providing safer working condi-

tions as a result of mandated safety regulations and equipment

safeguards.

’

Unpacking

Unpack the cleaner from the

carton and identify the parts

shown. Remove and dispose of

the cardboard packing.

A. Cleaner

B. Tools and extension wands

C. Hose

D. Wheeled carrier and hose

with tool holder

deluxe model

only

The cleaner assembled will look

like the drawing below.

Operate cleaner only at voltage specified on data plate on bottom

of cleaner.

1. Combination rug and floor nozzle

2. Wheeled carrier

provides easy towing; pull cleaner using hose to guide

the cleaner easily over carpet, area rugs and door sills. (Removable) In-

cluded with deluxe model only.

Crevice tool

4. Furniture nozzle

5. Cord

6. Carrying handle

7. On-off switch

Bag door lock

9. Tool holder

provides tool storage for crevice tool, dusting brush and

furniture nozzle. Included with deluxe model only.

10.

Extension wands

are used with the rug and floor nozzle. If added

length is desired when using cleaning tools, one or both wands may be

used.

11. Plastic latch ring

is located on extension wands and hose grip; rotates

to connect wands and cleaning tools.

12. Flexible hose

for use ease in using cleaning tools.

13. Dusting brush

14. Suction regulator

is set for MINIMUM, MEDIUM, or MAXIMUM suc-

tion by rotating the plastic ring so that the raised plastic indicator is

directly below the desired setting.

15. Hose grip

How to assemble

Connect hose

Insert hose connector into opening

in bag door by fitting prongs on

end of hose connector into cor-

responding slots in opening. Turn

hose connector in either direction

until it locks into position. Turn in

opposite direction to remove from

cleaner.

2. Attach extension

wands, cleaning tools and

nozzle

a. To attach extension wand to the

hose, rotate the plastic latch ring

on the hose grip to accept the but-

ton projection on the end of the ex-

tension wand. Turn the latch ring

to lock in place. To remove,

reverse the above procedure.

b. Cleaning tools may be attached

directly to the hose grip by follow-

ing the above directions.

Attach the second wand when us-

ing the rug and floor nozzle or for

added length when using cleaning

tools.

To attach the second wand and the

rug and floor nozzle, follow the

same procedure as when attaching

wand or tools to hose grip.

Push front of cleaner down to snap

into place.

Deluxe model only

3. Attach wheeled carrier

The removable wheeled carrier can

be used for transporting your

cleaner from room to room or for

use as you are cleaning.

To attach wheeled carrier, first,

open louvered door at the back of

the cleaner. Then position large

wheeled end of carrier into notch

as shown. Close door.

To remove wheeled carrier,

depress metal clip at small wheel

end while lifting up cleaner.

4. Position tools

Position tools in tool holder as

shown in the illustration.

How to use

CAUTION: POTENTIAL SHOCK HAZARD This vacuum cleaner is

not intended to be used where water may be present. Carpet will

retain moisture long after it has been wet. This vacuum cleaner

should not be used on wet or moist carpet.

Rug and floor nozzle

Use the combination rug and floor nozzle to clean both carpet and hard sur-

face floors. To connect rug and floor nozzle to the wands and hose, rotate

the plastic latch ring on the wand to accept the button projection on the end

of the rug and floor nozzle. Turn the latch ring to lock in place. To remove,

reverse the procedure.

Hard surface floors

Put the brush in the floor position

by moving the brush lock lever to

the “FLOOR” position on the noz-

zle.

Rugs

Put the brush in floating position by

moving the brush lock lever either

to the left or right to the “RUG”

position. You will find it convenient

to use only one hand when oper-

ating the cleaner on rugs and

carpet.

On certain types of dense carpet, it

may be advantageous to keep the

brush in a position where it does

not come in contact with the

carpet. To lock brush into the noz-

zle, adjust lever to “RUG” position

then press the brush all the way in-

to the nozzle with your finger.

While still holding the brush, adjust

the lever to the “FLOOR” position

and the brush will be locked into

place. To release brush; move the

brush lock lever either to the left or

right to the “RUG” position.

Note: Before using the nozzle on

hard surface floors, make certain

the brush is not locked into the

nozzle; then adjust the lever to the

“FLOOR” position.

For most efficient cleaning,

place the nozzle flat on rugs

and hard surface floors.

Edge cleaning feature

This feature provides for improved

cleaning of carpet edges near

baseboards and solid furniture.

Passages have been added to the

side of the nozzle to increase air

flow carrying dust from the carpet

edge to the nozzle.

Adjusting suction

The suction regulator is located on

the hose grip and may be used for

adjusting the amount of suction

when cleaning carpet and rugs or

when using the attachments.

Set the suction regulator to MINI-

MUM, MEDIUM, or MAXIMUM

suction by rotating the plastic ring

until the raised plastic indicator on

the dial is directly under the desired

setting.

Cleaning tools

The cleaning tools allow you to

do above the floor cleaning and

to clean hard to reach areas.

1. Furniture nozzle

for uphol-

stered furniture, draperies, tapes-

tries, mattresses, clothing, and

automobile interiors.

2. Dusting brush

for carved

furniture, table tops, books,

lamps, lighting fixtures, Venetian

blinds, baseboard, shutters and

registers.

Crevice tool

for radiators,

dresser drawers, edges of wall-

to-wall carpet, spaces between

kitchen equipment.

4. Wall/floor brush*

for walls

and very irregular hard surface

floors such as brick and slate.

*Available at additional cost.

Attaching tools

Tools may be attached 3 places

depending on your cleaning

needs:

To hose grip,to end of one

wand or to end of two wands

by rotating plastic latch ring.

To clean tools

To clean the hose, wipe off dirt

with a cloth dampened with a li-

quid detergent. Cleaning tools

can be washed in warm water

with a detergent. Rinse and let

dry before using.

’

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hoover Staubsauger Handbücher

Hoover

Hoover PowerScrub XL+ Bedienungsanleitung

Hoover

Hoover telios plus Bedienungsanleitung

Hoover

Hoover HP330ALG Bedienungsanleitung

Hoover

Hoover 5210 HERITAGE Bedienungsanleitung

Hoover

Hoover Vibra brush 5841 Bedienungsanleitung

Hoover

Hoover SAVVY Turbo Bedienungsanleitung

Hoover

Hoover WindTunnel WindTunnel Upright Bag Vacuum... Bedienungsanleitung

Hoover

Hoover UH70200 Bedienungsanleitung

Hoover

Hoover Robocom 2 Bedienungsanleitung

Hoover

Hoover S5640 Bedienungsanleitung

Hoover

Hoover Vap&Dry Bedienungsanleitung

Hoover

Hoover BR71BR02 Bedienungsanleitung

Hoover

Hoover VAPORLITE Bedienungsanleitung

Hoover

Hoover JAZZ JA1603 Bedienungsanleitung

Hoover

Hoover SAVVY U8135-900 Bedienungsanleitung

Hoover

Hoover Freespace TFS-8205 Bedienungsanleitung

Hoover

Hoover UH70015 - Platinum Collection Cyclonic Bagless Upright... Bedienungsanleitung

Hoover

Hoover FloorMate SpinScrub 500 Bedienungsanleitung

Hoover

Hoover FREEDOM Bedienungsanleitung

Hoover

Hoover WindTunnel U5721-900 Bedienungsanleitung

Hoover

Hoover UH70600 Bedienungsanleitung

Hoover

Hoover GUV Garage Utility Vac Bedienungsanleitung

Hoover

Hoover MAXLIFE PRO PET SWIVEL Bedienungsanleitung

Hoover

Hoover PRO STAIR Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch