Hoover U5023 Bedienungsanleitung

Thank you for

your purchase!

www.hoover.com

ENGLISH ➜pp. 1-14

ESPAÑOL ➜pág. 15-22

FRANÇAIS ➜p. 23-30

Owner’s Manual

Thank you for choosing a HOOVER product.

Please enter the COMPLETE model and serial numbers in the spaces provided.

The numbers are located on the back of your cleaner.

Model_________________________________________

Serial number_________________________________________

Hint: Attach your sales receipt to this owner’s manual.

Verification of date of purchase may be required for warranty service

of your HOOVER product.

Be sure to fill out and return the product registration card included with your

cleaner (see back cover).

Contents

Assembling Cleaner..........................3-4

How to use ............................................5

Cleaner Description ..........................5

Cleaning Tools................................7-8

If You Have a Problem........................13

Clearing Blockages ........................13

Important Safeguards ..........................2

Maintenance

Authorized Service..........................12

Cleaning Filters............................9-10

Emptying Dirt Cup..........................8-9

Lubrication ......................................12

Replacing Agitator Brush Roll ......12

Replacing Belt..................................11

Replacing Headlight........................10

Warranty ..............................................14

Important Safeguards

When using an electrical appliance, always follow

basic precautions, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

Warning:To reduce the risk of fire, electric shock, or injury:

•Do not use outdoors or on wet surfaces.

• Close supervision is necessary when any appliance is used by or near children.

Do not allow vacuum cleaner to be used as a toy or to run unattended at any time.

• Keep hair, loose clothing, fingers, feet and all parts of body away from openings,

rotating agitator and other moving parts. Do not operate cleaner in bare feet or

when wearing open toe shoes or sandals.

• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or

hot ashes.

• Do not use to pick up flammable or combustible materials such as gasoline or fine

wood sandings or use in areas where they may be present.

• Avoid picking up hard, sharp objects with the cleaner. They may damage the

cleaner.

• Always turn off this appliance before connecting or disconnecting hose.

• Do not use without dirt cup or filters in place. Empty dirt cup and clean filters fre-

quently when picking up very fine materials such as powder.

• Use extra care when cleaning on stairs.

• Do not put any object into openings. Do not use with any opening blocked; keep

free of dust, lint, hair, or anything that may reduce air flow.

• Do not pull or carry by cord, use cord as a handle, close door on cord or pull cord

around sharp edges or corners. Do not run appliance over cord. Keep cord away

from heated surfaces.

• Always disconnect cord from electrical outlet before servicing the cleaner.

• Unplug cleaner when not in use. Turn off all controls before unplugging.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Never

handle plug or appliance with wet hands.

• The use of an extension cord is not recommended.

• Do not use with damaged cord or plug. If appliance is not working as it should, has

been dropped, damaged, left outdoors, or dropped into water, take it to a Hoover

Factory Service Center or Authorized Hoover Warranty Service Dealer (Depot).

• Use vacuum cleaner only for its intended use as described in the instructions.

Use only attachments recommended by The Hoover Company; others may cause

hazards.

Save these instructions!

www.hoover.com

XXXXXX XXXXXX

XXXXXXXXXXXX

Review this manual before

operating cleaner

SERIAL

NUMBER

1. Cleaner Assembly

If you need any assistance:

Visit our website at www.hoover.com. Click on the “Service” button

to find the service outlet nearest you OR

Call 1-800-944-9200 for an automated referral of service outlet

locations (U.S. only) OR

Call 1-330-499-9499 to speak with a representative in our Consumer

Response Center.

Please do not return this product to the store.

Carton contents

Empty carton. Find the parts shown

before disposing of packing materials.

A. Handle section

B. Cleaner body

C. Hose, cleaning tools and wand

D. Handle screws (taped to top of

cleaner body)

Continued

➜

1-1

Attach handle

1-2 1-3 1-4

Remove tape and remove dirt cup from

cleaner body. Slide handle section (A) down onto

cleaner body (B) until handle snaps to

back of cleaner.

Insert screws into front of handle.

Tighten with a screwdriver.

Align latch (D) on hose end between

tabs (E) on dirt duct on back of

cleaner. Slide hose onto duct until latch (D)

snaps to lock hose in place.

Snap combination tool (I) into clip

on back of cleaner as shown.

1-8

1-5

1-6

1-7

1-10

Place tab on bottom of dirt cup (C)

into slot in cleaner. Pivot top of cup

and snap in place.

1-9

Place smaller, smooth end of wand

into bottom of holder. Snap wand

into clip.

Crevice tool (H) stores inside wand.

Attach hose

Position tools

Note: Hose must be connected as shown for

all operations.

Lift hose cover (F).

Position hose over hose hook on

handle and into hose tube (G). Twist

hose end slightly to tighten the con-

nection.

Continued

➜

1. Hand grip

2. Hose

3. Crevice tool

4. Wand

5. ON/OFF switch: located

on left side of cleaner

body

6. Dirt cup

7. Stair cleaning handle:

located on lower edge of

dirt cup.

8. Headlight

9. Hood

10. Carpet height adjustment

knob: rotate knob to cor-

rect setting for height of

carpet being cleaned.

11. Pre-filter assembly

(inside cup)

12. Pleated filter (inside cup)

13. Dirt cup latch

14. Dirt cup lid

15. Hose hook

16. Cord clip

17. Cord hooks: wrap

cord around hooks for

storage. The top hook

rotates right or left for

easy cord release.

18. Combination tool

19. Handle release pedal:

step on lever to lower

handle to operating or

low positions.

20. Carry handle

Cleaner description

2. How to use

Operate cleaner only at

voltage specified on data

plate on back of cleaner.

This cleaner is intended

for household use.

Polarized plug

To reduce the risk of electric shock, this

appliance has a polarized plug (one

blade is wider than the other). This plug

will fit in a polarized outlet only one way.

If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit,

contact a qualified electrician to install the

proper outlet. Do not change the plug in

any way.

ON-OFF switch

Plug cord into electrical outlet.

To turn cleaner ON, push switch (A) up.

To turn cleaner OFF, push switch down.

Cord clip

To help keep the cord out of the way while

vacuuming, position cord down into cord

clip (B).

2-2 2-3

2-1 1

10 19

Handle position

For ease in turning knob, place handle

in the upright position (C).

The nozzle will not move into the

adjusted position until the cleaner

handle is lowered to the operating

position (D).

Settings

For maximum cleaning performance,

the following carpet height settings are

recommended.

• Lowest setting: for low pile carpet and

hard floors.

• Medium setting: recommended for most

types of carpet.

• High setting: for deeper pile carpet

where easier pushing effort is desired,

while maintaining good cleaning perfor-

mance.

Note: If the cleaner is difficult to push,

turn knob to the high setting.

Carpet height

adjustment

The cleaning of carpet and rugs takes

place at the nozzle (A).

When it is necessary to raise and lower the

nozzle for various carpet pile heights, turn

the nozzle control knob (B) to the desired

setting.

Carrying handle

Use the carrying handle, located on the

back of the cleaner, to lift the cleaner.

Handle positions

The handle of your cleaner has three

positions; upright for storage and when

using cleaning tools; operating posi-

tion for general operation on carpet

and floors; low for reaching under low

furniture. Step on handle release lever

to lower handle.

Transporting cleaner

Put handle in upright position. Tilt

cleaner back on rear wheels. Push

forward.

2-4 2-5 2-6

2-7 2-8 2-9

Cleaning lightweight

flexible rugs

Stand on one end of rug and move

cleaner toward other end or edge.

Before reaching edge, push down on

handle. This will lift up the nozzle (front

of cleaner) as shown and will prevent

rug from clinging to cleaner. Continue to

lift up nozzle so that when you have

reached the edge, it is completely off

the rug. Move cleaner back to start

again, lower nozzle, and use only for-

ward strokes.

Edge cleaning

Edge cleaning is provided on both sides

of the nozzle to remove dirt in carpet

near baseboards and furniture.

Guide either side of nozzle parallel to

edge of carpet or furniture.

Cleaning tools

Tools allow for cleaning surfaces above

the floor and for reaching hard to clean

areas.

The cleaner is ready for tool use when

handle is in upright position.

CAUTION: Agitator continues to

rotate while cleaner handle is in

upright position. Avoid tipping clean-

er or setting it on furniture, fringed

area rugs or carpeted stairs during

tool use.

How to clean tools

To clean the hose, wipe off dirt with a

cloth dampened in a mild detergent.

Rinse with a damp cloth.

Cleaning tools may be washed in warm

water with a detergent. Rinse and air dry

before using.

2-10 2-11 2-12

2-14

Select proper tool

C. Combination tool: use with brush

attached to clean carved furniture, table

tops, books, lamps, lighting fixtures,

venetian blinds, baseboards, shutters,

and registers.

Remove brush to clean upholstered fur-

niture, draperies, mattresses, clothing,

and carpeted stairs.

D. Crevice tool may be used in tight

spaces, corners and along edges in

such places as dresser drawers, uphol-

stered furniture, stairs and baseboards.

E. Extension wand is used to give extra

length to your hose. Use it with any of

the above tools.

2-13

Stair cleaning

A stair cleaning handle has been

designed for ease in using your cleaner

on stairs. With handle in operating posi-

tion, place fingers under edge of stair

cleaning handle and guide cleaner with

other hand on upper handle.

As an alternative, you may use the hose

and combination tool for stair cleaning.

Clean from bottom to top.

When using cleaning tools, the agita-

tor will continue to rotate.

CAUTION: To avoid personal injury or

unnecessary wear to carpet, and to

prevent the cleaner from falling,

always place it at the bottom of the

stairs.

Remove hose

When using cleaning tools, cleaner

handle should be in the upright posi-

tion. Also, turn cleaner OFF before

disconnecting and connecting hose

to hose tube (A).

To use hose, lift hose end as shown.

Lower cover (B) onto hose tube. When

you are finished cleaning with the tools,

be sure to lift cover from hose tube

and reposition hose end into tube.

3. Maintenance

When to empty

It is recommended that the dirt cup be

emptied before the dirt reaches the dirt

opening on back of dirt cup (Fig. 3-1) or

after every use if preferred.

CAUTION: Very fine materials, such

as face powder or cornstarch, may

seal the filter and cause loss of suc-

tion. When using the cleaner for this

type of dust, empty the cup and clean

the filters often.

How to empty

Disconnect cleaner from electrical

outlet. Do not use the cleaner without

dirt cup or filters in place.

Remove cup - Squeeze dirt cup

latch. Pull cup forward.

2-15

Familiarize yourself with these home

maintenance tasks as proper use and

care of your cleaner will ensure contin-

ued cleaning effectiveness.

Dirt cup

The dirt cup assembly consists of the

following parts:

Lid (A)

Dirt Cup (B)

Pre-filter Assembly (C)

Pleated Filter (D)

(behind pre-filter)

Dirt Opening (E)

While the cleaner is in operation, the

pre-filter assembly screen will stop

larger debris from entering the pleated

filter chamber. This larger debris will be

seen collecting in the right side of the

dirt cup. The pleated filter will collect

fine particles that have passed through

the pre-filter assembly screen.

2-16

3-1

3-2

3-3

G H

Attach wand and tools

Attach tool or wand to the hose (G) by

pushing it firmly into hose.

Attach tool to the wand (H) in the same

manner.

Twist wand or tool slightly to tighten or

loosen the connection.

Combination tool

Slide brush to remove.

To replace brushes, align bottom of brush

with grooves (I) on tool. Slide brush into

place.

Empty cup - Remove lid.

Note: It is not necessary to remove the

pleated filter or the pre-filter assembly to

empty the dirt cup.

Tap side of cup until no more dust parti-

cles fall from the pleated filter.

Replace cup - Insert tab (F) on dirt

cup lid into slot (G) on dirt cup.

3-4

3-11

3-7

3-6

3-8 3-9 3-10

3-12

Pull up on pre-filter assembly. Slide it out

of cup.

Replace dirt cup.

Filter assembly

How to clean filter

assembly

Disconnect cleaner from electrical

outlet. Do not use the cleaner without

dirt cup or filters in place.

Remove dirt cup and dirt cup lid as

described in “How to empty dirt cup”.

Pivot pre-filter assembly (I) toward

center of cup.

Remove pleated filter from pre-filter

assembly.

The screen (J) can be cleaned with a

soft brush or rinsed with water.

Do not rinse or wash the pleated filter.

Slide pre-filter assembly all the way to

bottom of cup.

Position pre-filter assembly between

support in bottom of cup (N) and filter

frame (O).

Pivot pre-filter assembly and snap in

place.

Replace dirt cup lid.

If lid will not close completely, the

pre-filter assembly is not positioned

correctly.

Lay filter on top of pre-filter. Make sure

all filter pleats are inside the edges of

the pre-filter. Press on filter gasket (K)

until 4 tabs (L) (2 on either side of filter)

are set in the slots (M) on the pre-filter.

Be careful not to press the filter gasket

below the pre-filter edge.

Bend filter to open pleats.

Tap edges of filter until dust particles

stop falling from filter.

Do not tap the soft, pleated part of the

filter. It could damage the filter.

Place tab on bottom of dirt cup (H) into

slot in cleaner. Pivot top of cup and snap

in place.

3-5

3-17

Remove lens - Disconnect clean-

er from electrical outlet.

Insert a flat screwdriver into slot and

press down on tab. Remove lens.

Replace lens - Snap lens into

place.

3-16

3-15

Secondary and final

filters

The secondary and final filters are locat-

ed under the exhaust cover in the bot-

tom of the cleaner cavity. The secondary

filter protects the motor from dirt parti-

cles and the final filter assists in return-

ing clean air to the room.

Cleaning filters

Disconnect cleaner from electrical

outlet.

Remove dirt cup (Fig. 3-2). Remove

screw and lift off exhaust cover (P).

Lift out final filter (Q).

3-14

Llift off exhaust plate (R) and remove

secondary filter (S).

Hand wash both filters in cold water and

mild detergent and air dry.

Reposition DRY secondary filter, exhaust

plate, final filter, exhaust cover and

screw.

Replace dirt cup.

To replace the filters, ask for the follow-

ing:

Secondary filter: HOOVER part no.

59153029

Final filter: HOOVER part no. 59153028.

Headlight replacement

What to buy

This cleaner uses a 12 volt, wedge base

type 912 bulb, HOOVER part No.

27313107.

Install bulb - Pull old bulb straight

out of socket. Push new bulb straight

into socket until locked in place.

Excessive force is not required.

3-13

Inhaltsverzeichnis

Andere Hoover Staubsauger Handbücher

Hoover

Hoover S3330 Bedienungsanleitung

Hoover

Hoover TFS7187 011 Bedienungsanleitung

Hoover

Hoover XARION 25 Allergies Bedienungsanleitung

Hoover

Hoover Guardsman C1631 Bedienungsanleitung

Hoover

Hoover SteamVac F7210-900 Bedienungsanleitung

Hoover

Hoover SteamVac Aqility Turbopower Bedienungsanleitung

Hoover

Hoover CH85000 Leitfaden

Hoover

Hoover WindTunnel Self-Propelled Powered Hand Tool Bedienungsanleitung

Hoover

Hoover Quest 700 Bedienungsanleitung

Hoover

Hoover telios plus Bedienungsanleitung

Hoover

Hoover SONIX EVO CH51S20 Bedienungsanleitung

Hoover

Hoover Diva Bedienungsanleitung

Hoover

Hoover U5194-900 Bedienungsanleitung

Hoover

Hoover S5620 Bedienungsanleitung

Hoover

Hoover freemotion Bedienungsanleitung

Hoover

Hoover UH70015 - Platinum Collection Cyclonic Bagless Upright... Bedienungsanleitung

Hoover

Hoover S5640 Bedienungsanleitung

Hoover

Hoover UH70905 Bedienungsanleitung

Hoover

Hoover Linx Signature BH50020 Bedienungsanleitung

Hoover

Hoover SA1120 Bedienungsanleitung

Hoover

Hoover Purepower PU2111 001 Bedienungsanleitung

Hoover

Hoover ECOBRUSH Bedienungsanleitung

Hoover

Hoover FREESPACE Bedienungsanleitung

Hoover

Hoover Tranquility Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung