Hoover U5093940 Bedienungsanleitung

Upright Vacuum

Cleaner

Owner’s Manual

English ➜pp. 1-14

Spanish ➜pág. 15-22

French ➜p. 23-30

Review this manual before

operating cleaner.

This cleaner was inspected and packaged carefully before being shipped from the

factory. If you should happen to need assistance during assembly or operation,

Visit us online at www.hoover.com to find the service outlet nearest you (click

on the “Service” button) or

Call 1-800-944-9200 for an automated referral of authorized service outlet

locations (U.S. only) or

Call 1-330-499-9499 to speak with a representative in our Consumer

Response Center.

DO NOT RETURN THIS PRODUCT TO THE STORE.

Thank you for selecting a HOOVER product.

Fill in and retain

This vacuum cleaner is a combination cleaner. It is designed for carpet and rug clean-

ing and may be used with cleaning tools for other tasks.

The model and serial number are located on the bottom of the cleaner. For your per-

sonal records, please enter the COMPLETE model and serial number in the spaces

provided and retain this information.

Your cleaner is model

and has serial number

It is suggested that you attach your sales receipt to this owner’s manual. Verification of

date of purchase may be required for warranty service of your HOOVER product.

Save!

Index

Assembling Cleaner ..........................3-7

Cleaner Descriptions ............................7

How To Use

Cleaning Tools............................9-10

Upright Cleaner ............................7-9

If You Have a Problem ...................... 13

Important Safeguards.......................... 2

Lubrication ..........................................13

Maintenance

Authorized Service ...................... 14

Replacing Agitator....................12-13

Replacing Belt ..........................11-12

Replacing Headlight .................... 11

Replacing Filter Bag .................... 11

Unpacking Cleaner................................3

Warranty ..............................................14

www.hoover.com

Important Safeguards!

When using an electrical appliance, always follow

basic precautions, including the following:

READALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

To reduce the risk of fire, electric shock, or injury:

•Do not use outdoors or on wet surfaces.

•Close supervision is necessary when any appliance is used by or near children. Do

not allow vacuum cleaner to be used as a toy or to run unattended at any time.

•Keep hair, loose clothing, fingers, feet and all parts of body away from openings,

rotating agitator and other moving parts. Do not operate cleaner in bare feet or when

wearing open toe shoes or sandals.

• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or

hot ashes.

•Do not use to pick up flammable or combustible materials such as gasoline, or fine

wood sandings or use in areas where they may be present.

•Avoid picking up hard, sharp objects with the cleaner. They may damage the cleaner

and the bag.

•Always turn off this appliance before connecting or disconnecting hose.

•Do not use without dust bag or filters in place. Change bag frequently when picking

up very fine materials such as powder.

•Use extra care when cleaning on stairs.

•Do not put any object into openings. Do not use with any opening blocked; keep

free of dust, lint, hair, or anything that may reduce air flow.

•Do not pull or carry by cord, use cord as a handle, close door on cord or pull cord

around sharp edges or corners. Do not run appliance over cord. Keep cord away

from heated surfaces.

•Always disconnect cord from electrical outlet before servicing the cleaner.

•Unplug cleaner when not in use. Turn off all controls before unplugging.

•Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Never

handle plug or appliance with wet hands.

• The use of an extension cord is not recommended.

•Do not use with damaged cord or plug. If appliance is not working as it should, has

been dropped, damaged, left outdoors, or dropped into water, take it to a Hoover

Factory Service Center or Authorized Hoover Warranty Service Dealer (Depot).

•Use vacuum cleaner only for its intended use as described in the instructions. Use

only attachments recommended by The Hoover Company; others may cause

hazards.

Save these instructions

Warning:

It is extremely important to read and follow all

the instruction steps in order.

1. Assembling cleanerr

The assembled cleaner will look like this drawing.

If you need assistance with any step of the assembly,

Visit us on-line at www.hoover.com to find the service outlet nearest

you (click on the “Service” button) or

Call 1-800-944-9200 for an automated referral of authorized service out-

let locations (U.S. only) or

Call 1-330-499-9499 to speak with a representative in our Consumer

Response Center.

This cleaner is intended for househoId use.

Remove all parts from carton and identify

each item shown.

Make sure all parts, especially small items

such as F and H, are located before dis-

posing of cardboard packing.

FRONT

Carton contents

BACK

1-1

ABC

A. Upper handle

B. Lower handle

C. Cord

D. Tool rack

E. Bag compartment

F. Bracket

G.Cleaner body

H. Handle bolt and nut packet

(one extra nut included)

I. Filter bag

J. Hose and cleaning tools (some

models come with one wand, others

come with two)

Handle assembly

1-2 1-3

1-5

1-4 1-6

Place upper (B) and lower (C) handle sections on a flat surface

with cord hooks (A) on top. With hands on sides of handle sec-

tions, push sections together firmly until they “click” into place.

*Do not press against the rod (D) extending from the lower han-

dle. If the rod breaks or bends, the cleaner will not work prop-

erly. Do not push handle together with your hands on the ends

of the sections.

Note: The small red tab (E) above the ON/OFF switch (F) is for

shipping purposes only and may fall off during assembly. If it

does not fall off, the tab will be removed during the final steps of

assembly.

Turn handle over. Insert large rectangular end of cord into pocket

in bottom of handle, with side marked “UP” visible.

Make sure rectangular end is pushed into the handle as far as pos-

sible.

Slide cord protector (G) toward upper handle.

“UP” G

DDF

With arrow on cord protector pointing

toward arrow on upper handle, press

groove (I) in cord protector into slot in

upper handle.

Pull cord tight.

Press cord into place at each of the three notches indicated and

note correct positioning of (G).

Do not plug cleaner in until assembly is totally complete.

1-7 1-8

Note location of tapered rails (J) on

bracket (K) and on lower handle.

1-9

Pull bracket toward bottom of handle

slightly to make sure bracket is locked

in place.

Make sure hole in bracket aligns with

hole in handle (M).

Rotate cord protector on

cord until you see its arrow

(H).

With printed side of bracket (K) facing

up, slide rails on bracket onto rails (J) on

lower handle until bracket snaps past

the lock tab (L).

Attach cord

1-11

Push bolt into hole on lower front of handle.

If bolt will not go through hole easily,

check the following:

• the bracket is properly positioned (Fig.

1-9)

• the handle is pushed completely down

(Fig. 1-10)

1-12

Place nut in recessed area at back of

handle. Hold nut in place while tightening

bolt securely with a screwdriver.

Note: Only one nut is needed on this

model. The extra nut is not required but

has been provided for your convenience.

1-13

With side of rack marked TOPFRONT fac-

ing away from cleaner handle, pull cord

through rack and lower rack over handle

as shown. Slide rack down handle.

1-14 1-15

1-16 1-17 1-18

Continue to slide rack down until bottom of

rack is below lower cord hook (O). Snap

one side of rack then the other onto lower

handle.

Slide rack down handle until upper hooks

(P) snap into slots (Q) on handle.

Pull bag door latch forward and remove

door. Set bag door aside.

Slide large tab (R) on bottom back of bag

compartment into slot between the bracket

and the lower handle.

Note round opening and hooks (S) on

back of bag compartment. Place opening

over dirt tube (T) and align hooks with slots

in handle.

Push very firmly to snap both hooks

into handle.

Pull on bag compartment to make sure it is

completely snapped to handle.

Continued ➜

1-10

With cord hooks to the back, place

assembled handle onto handle base of

cleaner body (N).

Rock handle side to side while push-

ing down firmly. Extra pushing effort

may be required.

Attach handle

Attach tool rack

Attach bag

compartment

1-20 1-21

1-22

1-19

Align opening (U) in filter bag with dirt

tube (T) inside bag compartment.

Continued ➜

Push bag collar firmly onto dirt tube.

Tuck top and bottom of bag into bag

compartment.

To replace bag door, insert the tabs (V)

on bottom of bag door into the slots on

bag compartment.

Make sure all edges of paper bag are

completely inside the bag compartment.

Close door.

Break off red tab (E) above ON-OFF

switch by pushing down on tab.

Note: If tab has come off during assem-

bly make sure switch is in the OFF posi-

tion (down) before plugging cord into an

electrical outlet.

Press hose firmly into rack at upper

extensions.

1-23 1-24

1-25 1-26 1-27

Attach hose and tools

Place round end of hose over round

extension on bottom of rack.

Insert hose connector, with latch toward

front of cleaner, into opposite side of

rack.

With smaller end toward bottom, snap

wand (W) into clips on rack. Second

wand (some models only) fits in front of

first wand and snaps into outer clips.

Position dusting brush (X) into rack as

shown.

Attach filter bag

1-29

2-1

Slide crevice tool (Z) onto projection.

Snap into place.

Remove rectangular foam retainer (AA),

if present, (part of protective packing

material) located under the handle

release lever. Discard foam retainer.

CAUTION: When cleaner is turned on,

the agitator brush roll will continue to

rotate while cleaner handle is in

upright position. Avoid tipping clean-

er or setting it on furniture, fringed

area rugs or carpeted stairs during

tool use.

Cleaner description

2. How to user

The assembled cleaner will look like the drawing.

1. Handle

2. Cord hooks: wrap cord around hooks for

storage. The top hook can be rotated right or left

for easy cord release.

3. Bag door latch

4. ON/OFF switch: located on side of handle.

5. Bag door

6. Stair cleaning handle: located on lower edge

of bag.

7. Handle release lever: step on lever to lower

handle to operating or low position.

8. Cleaner body

9. Nozzle control knob: slide knob to correct

setting for height of carpet being cleaned.

10. Headlight (some models only)

11. Furniture guard: helps prevent cleaner from

marking furniture.

12. Hose door: open door to connect hose to

cleaner.

13. Hood

14. Hose

15. Tool rack

16. Dusting brush

17. Wand(s)

18. Furniture nozzle

19. Crevice tool

Operate cleaner only at voltage specified on

bottom plate on bottom of cleaner.

1-28

Place furniture nozzle (Y) on lip on lower

part of rack and snap into place.

2-2 2-3

2-4

To reduce the risk of electric shock, this

appliance has a polarized plug (one

blade is wider than the other). This plug

will fit in a polarized outlet only one way.

If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit,

contact a qualified electrician to install

the proper outlet. Do not change the

plug in any way.

To turn cleaner on, push switch up.

To turn cleaner off, push switch down.

Plug cord into electrical outlet.

Turn cleaner on and, with handle in

upright position, pull back on handle

until front of cleaner is lifted off the car-

pet. This insures that the filter bag is

inflated.

The handle of your cleaner has three

positions; upright for storage and when

using cleaning tools; operating for gen-

eral operation on carpet and floors; low

for reaching under low furniture. Step on

handle release lever to lower handle.

2-5 2-6

2-7 2-8

To move your cleaner from room to

room, put handle in upright position, tilt

cleaner back on rear wheels and push

forward.

The cleaner can also be moved by lifting

it as shown.

The cleaning of carpet and rugs takes

place at the nozzle (A).

For ease in sliding the control, the han-

dle should be in the upright position (C).

The front of the cleaner will not move

into the adjusted position until the

cleaner handle is lowered to the oper-

ating position (D).

For maximum cleaning performance the

following carpet height settings are recom-

mended.

• Low Setting 1: for bare floors

• Setting 2*: for low pile, level loop, kitchen

type, and other similar types of carpet

• Setting 3*: for very deep pile carpet

*Note: If the cleaner is difficult to push,

slide the control to the next higher setting.

Handle positions

Transporting cleaner Carpet height

adjustment

When it is necessary to raise and lower

the front of the cleaner for various carpet

pile heights, slide the nozzle control (B)

knob to the correct setting.

2-9 2-10 2-11

2-12 2-13 2-14

To clean lightweight flexible rugs, stand

on one end of rug and move cleaner

toward other end or edge. Before reach-

ing edge, push down on handle. This

will lift up the nozzle (front of cleaner)

and will prevent rug from clinging to

cleaner. Continue to lift up nozzle so that

when you have reached the edge, it is

completely off the rug. Move cleaner

back to start again, lower nozzle, and

use only forward strokes.

Cleaning lightweight

rugs Edge cleaning Stair cleaning

Cleaning tools Attach hose to

cleaner Select proper tool

Edge cleaning is provided on both sides

of nozzle to remove dirt in carpet near

baseboards and furniture. Guide either

side of nozzle parallel to edge of carpet

or furniture.

A stair cleaning handle has been

designed for ease in using your cleaner

on stairs. With handle in operating posi-

tion, place fingers under edge of stair

cleaning handle and guide cleaner with

other hand on upper handle.

As an alternative, you may use the hose

and furniture nozzle for stair cleaning.

Clean stairs from bottom to top.

When using cleaning tools, the agita-

tor will continue to rotate.

CAUTION: To avoid personal injury or

unnecessary wear to carpet, and to

prevent the cleaner from falling, use

extra care if cleaner is placed on

stairs.

The tool set includes a hose, wand(s)*,

crevice tool, furniture nozzle and dusting

brush.

*some models include two wands

Turn cleaner OFF before attaching or

removing hose.

With cleaner handle in upright position,

open hose door and insert hose connec-

tor until locked in position. Suction will

automatically be diverted to the hose

when cleaner is turned on.

To remove hose, press latch (E) on hose

connector and pull up.

Note: Hose must be removed from hose

door when cleaning carpet and rugs to

insure proper cleaning performance.

1. Dusting brush may be used for

carved furniture, table tops, books,

lamps, lighting fixtures, venetian blinds,

baseboards, shutters, and registers.

2. Furniture nozzle may be used for

upholstered furniture, draperies, tapes-

tries, mattresses, clothing, automobile

interiors, and carpeted stairs.

3. Crevice tool may be used in tight

spaces, corners and along edges in

such places as dresser drawers, uphol-

stered furniture, stairs, and baseboards.

4. Wand(s)* used to give extra length to

your hose. Use it with any of the above

tools.

*some models include two wands

Continued ➜

CAUTION: Agitator continues to rotate

while cleaner handle is in upright posi-

tion. Avoid tipping cleaner or setting it

on furniture, fringed area rugs, or car-

peted stairs during tool use.

2-15 2-16

Attach wand and

tools Clearing obstructions

To clean tools

The tools are attached to the hose or the

wand in the same manner.

Push tool firmly onto hose; twist tool

slightly to tighten or loosen connection.

Use cleaning tools with cleaner handle

in upright position.

To check for obstructions, first turn

cleaner off and disconnect from elec-

trical outlet; then disconnect hose

from cleaner. Open hose door and care-

fully remove any visible obstruction. If no

obstruction is found, check hose and

tools.

Remove obstruction. To continue using

tools, re-attach hose to cleaner. If no

obstruction is found and a problem per-

sists, contact your Hoover Factory

Service Center or an Authorized Warranty

Service Dealer (Depot).

To clean the hose, wipe off dirt with a

cloth dampened in a liquid detergent.

Rinse with a damp cloth. Cleaning tools

may be washed in warm water with a

detergent. Rinse and air dry before

using.

The following sections are concerned

with proper maintenance of the cleaner.

Familiarize yourself with these home

maintenance tasks and keep this owner’s

manual in a convenient place where you

can refer to it when needed. Proper use

and care of your cleaner will ensure con-

tinued cleaning effectiveness.

3. Maintenance

When to replace

Check bag from time to time. It is rec-

ommended that you change the filter

bag when dirt reaches the dotted line. If

more dirt than this accumulates, your

cleaner may not operate effectively.

CAUTION: Very fine materials, such as

face powder, cornstarch, fireplace ashes

or fireplace soot, may seal the paper

bag and may cause it to burst even

though it is only partially full of dirt.

When cleaner is used to remove material

of this nature, change bag often.

The bag

Where to buy

Filter bags may be purchased from your

local Authorized Hoover Dealer (Depot),

Leading Retailers, from Hoover Factory

Service Centers, using the order form

packed with your cleaner, or through

The Hoover Company online at

www.hoover.com.

When ordering bags, be sure to give

the model number of your cleaner.

What to buy

For improved cleaning effectiveness,

use only Genuine HOOVER Allergen

Filtration Type A disposable bags with

your cleaner.

Regular HOOVER®Type Adisposable

bags also fit your cleaner.

To assure that your cleaner operates at

peak performance, it is imperative that

you use only genuine HOOVER filter

bags distributed by The Hoover

Company. HOOVER bags can be identi-

fied by these trademarks -

Continued ➜

®®

Inhaltsverzeichnis

Andere Hoover Staubsauger Handbücher

Hoover

Hoover FREESPACE Bedienungsanleitung

Hoover

Hoover Road Rat Road Rat Wet & Dry Cleaner Bedienungsanleitung

Hoover

Hoover Wind Tunnel Bedienungsanleitung

Hoover

Hoover TurboPOWER Bedienungsanleitung

Hoover

Hoover POWERDASH PET ADVANCED Bedienungsanleitung

Hoover

Hoover Synthesis ST71ST02 Bedienungsanleitung

Hoover

Hoover Dubl-Duty Bedienungsanleitung

Hoover

Hoover UH40155 Bedienungsanleitung

Hoover

Hoover S3590 - Duros Power Nozzle Canister Vacuum... Bedienungsanleitung

Hoover

Hoover POWERDASH FH41000 Bedienungsanleitung

Hoover

Hoover UH70800 Bedienungsanleitung

Hoover

Hoover VR81-HU01001 Bedienungsanleitung

Hoover

Hoover Freejet 3in1 Bedienungsanleitung

Hoover

Hoover Mistral Bedienungsanleitung

Hoover

Hoover Jovis Plus Bedienungsanleitung

Hoover

Hoover UH72460 Bedienungsanleitung

Hoover

Hoover MAXLIFE Total Home Pet UH74100M Bedienungsanleitung

Hoover

Hoover Sensory Ecobox System Bedienungsanleitung

Hoover

Hoover H-Free 500 Plus Bedienungsanleitung

Hoover

Hoover CAPTURE Bedienungsanleitung

Hoover

Hoover Compact Canister Cleaner Bedienungsanleitung

Hoover

Hoover Power Max HT87-T2-ME Bedienungsanleitung

Hoover

Hoover BV71 BV30011 Bedienungsanleitung

Hoover

Hoover SAVVY Turbo Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung