Hoover U5753900 Bedienungsanleitung

WindTunnel™

Bagless by HOOVER

Congratulations

on your purchase!

This product was designed for

easy assembly (see page 3)

www.hoover.com

Fill in and retain

The model and serial number are located on the bottom of the cleaner.

For your personal records, please enter the COMPLETE model and serial number

in the spaces provided and retain this information.

Your cleaner is model_________________________________________

and has serial number_________________________________________

It is suggested that you attach your sales receipt to this owner’s manual.

Verification of date of purchase may be required for warranty service of your

HOOVER product.

Index

Assembling Cleaner..........................3-4

Carton Contents....................................3

Cleaner Descriptions............................5

How To Use ........................................5-7

Cleaning Tools ..................................7

Embedded DirtFINDER™ Feature....6

If You Have a Problem ..................13-14

Clearing Blockages ........................14

Important Safeguards ..........................2

Lubrication ..........................................13

Maintenance

Authorized Service..........................13

Cleaning filters ..............................8-9

Emptying Dirt Cup ............................8

Replacing Agitator Brush Roll ......11

Replacing Power Hand Tool

Agitator Brush Roll ......................12

Replacing Belt ............................10-11

Replacing Power Hand Tool Belt ..12

Replacing Edge Groomers ............11

Replacing Headlight........................10

Thermal Protector ..............................13

Warranty ..............................................14

Important Safeguards

When using an electrical appliance, always follow

basic precautions, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

Warning:To reduce the risk of fire, electric shock, or injury:

•Do not use outdoors or on wet surfaces.

• Close supervision is necessary when any appliance is used by or near children.

Do not allow vacuum cleaner to be used as a toy or to run unattended at any time.

• Keep hair, loose clothing, fingers, feet and all parts of body away from openings,

rotating agitator and other moving parts. Do not operate cleaner in bare feet or

when wearing open toe shoes or sandals.

• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or

hot ashes.

• Do not use to pick up flammable or combustible materials such as gasoline or fine

wood sandings or use in areas where they may be present.

• Avoid picking up hard, sharp objects with the cleaner. They may damage the

cleaner.

• Always turn off this appliance before connecting or disconnecting hose.

• Do not use without dirt cup or filters in place. Empty cup and clean filter frequently

when picking up very fine materials such as powder.

• Use extra care when cleaning on stairs.

• Do not put any object into openings. Do not use with any opening blocked; keep

free of dust, lint, hair, or anything that may reduce air flow.

• Do not pull or carry by cord, use cord as a handle, close door on cord or pull cord

around sharp edges or corners. Do not run appliance over cord. Keep cord away

from heated surfaces.

• Always disconnect cord from electrical outlet before servicing the cleaner.

• Unplug cleaner when not in use. Turn off all controls before unplugging.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Never

handle plug or appliance with wet hands.

• The use of an extension cord is not recommended.

• Do not use with damaged cord or plug. If appliance is not working as it should, has

been dropped, damaged, left outdoors, or dropped into water, take it to a Hoover

Factory Service Center or Authorized Hoover Warranty Service Dealer (Depot).

• Use vacuum cleaner only for its intended use as described in the instructions.

Use only attachments recommended by The Hoover Company; others may cause

hazards.

Save these instructions!

www.hoover.com

XXXXXX XXXXXX

XXXXXXXXXXXX

ENGLISH ➜pp.1-14

ESPAÑOL ➜pág. 16-24

FRANÇAIS ➜p. 25-33

Owner’s Manual Review this manual before

operating cleaner

SERIAL

NUMBER

1. Assembling cleaner

This cleaner was inspected and packaged carefully before being shipped from the factory. If you

should happen to need assistance during assembly or operation, call:

Visit us on-line at www.hoover.com to find the service outlet nearest you (click

on the “Service” button) OR

1-800-944-9200 for an automated referral of service outlet locations (U.S. only) OR

1-330-499-9499 to speak with a representative in our Consumer Response Center.

Carton contents

Remove all parts from carton and identify each item shown.

Make sure all parts are located before disposing of packing.

A. Handle section

B. Cleaner body

C. Hose, cleaning tools and wands

(packed on cleaner)

D. Powered hand tool (some models)

1-1

Note: The white switch lock above the ON/OFF switch aids

in the assembly of your cleaner. Assembly can be continued if

the switch lock is missing. However, do not remove the switch

lock until assembly is completed.

Continued

➜

FOR HANDLE ASSEMBLY

REMOVE SCREWS AND CARDBOARD.

SEE OWNER'S MANUAL FOR

COMPLETE INSTRUCTIONS

Make sure that the switch is in the

OFF position.

Slide handle section onto back of

handle.

Push screws into holes on back of

handle.

Tighten screws securely with a

Phillips screwdriver.

Remove powered hand tool (some

models) from plastic bag and return

it to the tool storage area.

Remove switch lock (C) above ON/

OFF switch (D) by pulling it straight

out. Dispose of switch lock.

If switch lock has come off during

assembly, make sure switch is in

OFF position (down) before plug-

ging into electrical outlet.

1-3 1-4

1-2

1-5

1-6

Open tool cover on cleaner body

(B).

Remove powered hand tool (some

models).

Remove cardboard (A) and screws

from handle section. Discard card-

board.

STEP 1 Attach handle

Continued

➜

1. Handle

2. ON/OFF switch

3. Tool cover

4. Dusting brush

5. Powered hand tool*

or Crevice tool*

(depending on model)

6. Furniture nozzle

7. Dirt cup latch

8. Dirt cup lid

9. Dirt cup

10. Dirt cup handle

11. HEPA cartridge filter

12. Pre-filter

13. Final filter

14. Three position handle

release pedal: step on

lever to lower handle to

operating or low positions.

15. Nozzle control knob:

slide knob to correct set-

ting for height of carpet

being cleaned.

16. Furniture guard

17. Headlight

18. DirtFINDER™ display

19. Embedded

DirtFINDER™ sensi-

tivity switch

20. Edge groomers

21. Hose

22. Hose rack

23. Cord hooks: wrap

cord around hooks for

storage. The top hook

can be rotated right or

left for easy cord

release.

24. Carrying handle

25. Extension wands

26. Crevice wand*: stores

in rear wand.

*Some models only

2-1

Cleaner description

24 22

2. How to use

The assembled cleaner will look like the drawing.

Model with Powered Hand Tool is shown.

Operate cleaner only at

voltage specified on data

plate on bottom of

cleaner.

This cleaner is intended

for household use.

Polarized plug

To reduce the risk of electric shock, this

appliance has a polarized plug (one

blade is wider than the other). This plug

will fit in a polarized outlet only one way.

If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit,

contact a qualified electrician to install the

proper outlet. Do not change the plug in

any way.

ON-OFF switch

Plug cord into electrical outlet.

To turn cleaner ON, push switch up.

To turn cleaner OFF, push switch down.

2-2 2-3 2-4

Carrying cleaner

The cleaner can also be moved by

using the carrying handle.

Handle positions

The handle of your cleaner has three

positions; upright for storage and when

using cleaning tools; operating posi-

tion for general operation on carpet

and floors; low for reaching under low

furniture. Step on handle release lever

to lower handle.

Transporting cleaner

To move your cleaner from room to

room, put handle in upright position, tilt

cleaner back on rear wheels and push

forward.

Handle position

For ease in sliding knob, place handle

in the upright position and tilt cleaner

foward (E).

The nozzle will not move into the

adjusted position until the cleaner

handle is lowered to the operating

position (F).

Settings

For maximum cleaning performance,

the following carpet height settings are

recommended.

• Lowest setting: for bare floors and all

types of carpet

Note: If the cleaner is difficult to push,

slide knob to the next higher setting.

• Higher settings: for very deep pile

carpet where easier pushing effort is

desired, while maintaining good cleaning

performance.

Cleaning lightweight

flexible rugs

Stand on one end of rug and move

cleaner toward other end or edge.

Before reaching edge, push down on

handle. This will lift up the nozzle (front

of cleaner) and will prevent rug from

clinging to cleaner. Continue to lift up

nozzle so that when you have reached

the edge, it is completely off the rug.

Move cleaner back to start again, lower

nozzle, and use only forward strokes.

Carpet height

adjustment

The cleaning of carpet and rugs takes

place at the nozzle (C).

When it is necessary to raise and lower the

nozzle for various carpet pile heights, slide

the nozzle control knob (D) to the desired

setting.

2-5

2-8

2-9

Embedded

DirtFINDER™ feature

With red and green lights (A), the

DirtFINDER™ system alerts the user to

areas of carpet that may need more

cleaning attention. It is able to sense

when larger amounts of dirt particles,

especially embedded dirt, are removed.

To let you know that the DirtFINDER™

feature is ready, the red light will come

on when the cleaner is first turned on.

After a few seconds, the red light will go

off and the green light will come on.

Cleaning may then begin.

The green light will remain on through-

out cleaning, except when the detector

senses that a larger amount of dirt is

being picked up; then the red light will

come on.

When the red light is on, you should

take additional cleaning strokes in the

area until it changes to green.

• The red light may seldom come on

during cleaning. this means that your

cleaner is picking up primarily fine sur-

face dust and lint which the system may

not detect, or that the carpet is generally

clean. To increase the feature’s sensi-

tivity to dirt, set the switch (B) to the

“HI” position.

• At other times, the red light may stay

on for a considerable amount of time.

This means that the carpet contains a

high level of dirt which is being removed

by the cleaner. To decrease the fea-

ture’s sensitivity to dirt, set the switch

to the “REG.” (Regular) position.

2-7

High

Bare Floor

2-6

2-13

Select proper tool

I. Dusting brush may be used for

carved furniture, table tops, books,

lamps, lighting fixtures, venetian blinds,

baseboards, shutters, and registers.

J. Furniture nozzle may be used for

upholstered furniture, draperies, mat-

tresses, clothing, automobile interiors,

and carpeted stairs.

K. Powered hand tool*may be used for

upholstered furniture, carpeted stairs

and hard-to-reach places.

L. Crevice tool*may be used in tight

spaces, corners and along edges in

such places as dresser drawers, uphol-

stered furniture, stairs and baseboards.

M. Crevice wand*can be used in tight

spaces, corners and along edges in

such places as dresser drawers, uphol-

stered furniture, stairs, and baseboards.

It can also be used for extra reach with

the dusting brush and/or extension

wand.

N. Wands are used to give extra length

to your hose. Use them with any of the

above tools.

*some models

2-12

2-15

2-14 IJK

Cleaning tools

Tools allow for cleaning surfaces above

the floor and for reaching hard to clean

areas.

Handle must be in the upright posi-

tion for tool use.

CAUTION: Agitator continues to rotate

while cleaner handle is in upright

position. Avoid tipping cleaner or

setting it on furniture, fringed area

rugs or carpeted stairs during tool

use.

Attach wand and tools

Attach tool or wand to the hose (G).

Attach second wand or tool to wand (H)

by pushing it firmly onto the wand.

Twist wand or tool slightly to tighten or

loosen the connection.

How to clean tools

To clean the hose and the powered

hand tool, wipe off dirt with a cloth

dampened in a mild detergent. Rinse

with a damp cloth. Do not submerge

powered hand tool in water.

Cleaning tools may be washed in warm

water with a detergent. Rinse and air dry

before using.

How to attach tool

cover

The tool cover is designed with a “break-

away” feature which allows it to snap free if

it is pushed open too far.

To reattach, align hinges of cover with slots

on sides of tool storage area.

Push cover down to secure in place.

Extra reach hose*

Push ON/OFF switch to OFF position.

Remove regular hose from cleaner. Align

end of extra reach hose with projections

(O) over slots (P) in dirt duct.

2-16

Slide hose into (P) and twist hose to lock

it into place. (To detach hose, reverse

procedure.) Attach wands or tools to the

other end of hose.

*Available at additional cost if not includ-

ed with your cleaner.

Edge cleaning

Special edge groomers are provided on

both sides of the nozzle to remove dirt in

carpet near baseboards and furniture.

Guide either side of nozzle parallel to

edge of carpet or furniture.

Stair cleaning

Use the hose and powered hand tool* or

furniture nozzle for stair cleaning. Clean

from bottom to top.

When using cleaning tools, the

agitator will continue to rotate.

CAUTION: To avoid personal injury or

unnecessary wear to carpet, and to

prevent the cleaner from falling,

always place it at bottom of stairs.

*some models only

2-10 2-11

Familiarize yourself with these home

maintenance tasks as proper use and

care of your cleaner will ensure contin-

ued cleaning effectiveness.

Dirt cup

The dirt cup assembly consists of the

following parts:

Lid (A)

Dirt Cup (B)

Pre-filter (C)

HEPA Cartridge Filter (D)

Dirt Inlet Opening (E)

While the cleaner is in operation, the pre-

filter screen will stop larger debris from

entering the HEPA cartridge filter chamber.

This larger debris will be seen collecting in

the left side of the dirt cup. The HEPA car-

tridge filter will collect fine particles that

have passed through the pre-filter screen.

When to empty

It is recommended that the dirt cup be

emptied before the dirt reaches the dirt

inlet opening on back of dirt cup (Fig. 3-1)

or after every use if preferred.

CAUTION: Very fine materials, such

as face powder or cornstarch, may

seal the filter and cause loss of suc-

tion. When using the cleaner for this

type of dust, empty the cup and clean

the filters often.

How to empty

Disconnect cleaner from electrical

outlet. Do not use cleaner without dirt

cup or filters in place.

Push latch (F) to the left to unlock.

Lift cup slightly and pull straight out to

remove from cleaner.

Remove lid.

Note: It is not necessary to remove the

HEPA cartridge filter to empty the dirt

cup.

Tap side of cup until no more dust

particles fall from the HEPA cartridge

filter.

3-1

3-3

Replace dirt cup lid.

Slide cup straight into cleaner cavity.

Bottom of cup will rest behind grooves

at bottom of cleaner cavity (G).

Push latch (F) to the right to lock in

place.

3-4 3-5

3. Maintenance

Filter assembly

The HEPA cartridge filter and pre-filter

are essentially self-shedding.

Tapping the side of the dirt cup as

described in “How to empty dirt cup”

should sufficiently remove dust and fine

particles from the HEPA cartridge filter

and pre-filter.

The filter assembly can also be removed

for additional cleaning. How to clean filter

assembly

Remove dirt cup and dirt cup lid as

described in “How to empty dirt cup.”

Grasp pre-filter frame and pull up firmly.

Slide filter assembly out of cup.

3-2

Continued

➜

Align grooves (H) on pre-filter frame with

grooves (I) in dirt cup.

3-6 3-7 3-8

3-9 3-10

3-11

Slide filter assembly down into cup until

a light snap is felt. Gently pull up on

assembly to ensure that it is seated

properly in the cup. Ensure that no part

of pre-filter screen extends above top

edge of dirt cup.

Replace lid and return cup to cleaner

(Fig. 3-4).

Cleaning secondary filter

Disconnect cleaner from electrical

outlet.

The secondary filter (J), located behind

the grill in the bottom of cleaner cavity,

protects the motor from dirt particles.

If the filter becomes dirty, remove dirt

cup (Fig. 3-2). Remove screw and pull

grill out. Lift out filter.

Hand wash filter in cold water with mild

detergent, then air dry.

Reposition dry filter, grill and screw.

Replace dirt cup.

Should you want to replace this filter, ask

for HOOVER part No. 38762008.

Grasp end of HEPA cartridge filter and

pull it away from pre-filter. Remove

cartridge from assembly.

The pre-filter (C) can be cleaned with a

brush and then rinsed with water. Allow

pre-filter to dry thoroughly.

It is recommended that the HEPA

cartridge filter be cleaned by tapping

either of the ends. DO NOT tap soft

pleated sides of HEPA cartridge filter

as this could damage the filter.

Tap filter until no more dust particles fall

from the filter.

DO NOT rinse HEPA cartridge filter

with water.

To re-assemble filter assembly, place

large knob of HEPA cartridge filter in

hole on bottom of pre-filter.

Snap top of HEPA cartridge filter into

place.

3-133-12

Cleaning final filter

The final filter assists in the filtration

process to return clean air to the room.

To remove this filter when it becomes

dirty, open the door on the side of the

cleaner.

Lift out filter (K) and hand wash it in cold

water with mild detergent.

Reattaching filter door

The filter door is designed with a “break-

away” feature which allows it to snap

free if it is pushed open too far.

To reattach, align hinges (L) of cover

with slots on sides of filter area.

Press door back into place.

Let filter air dry and reposition it on the

side of cleaner. Make sure the white

side of the filter faces outward. Close

door.

Should you want to replace this filter, ask

for HOOVER part No. 40110006.

Do not operate cleaner without any of

the filters in place.

Secondary and final

filters

3-17 3-18

Replacing lens

Reposition lens and secure with the two

screws.

Belt replacement

The belt on your HOOVER cleaner

causes the agitator to rotate and is

important for the effective operation of

the cleaner. The belt is located under

the bottom plate of the cleaner and

should be checked from time to time

to be sure it is in good condition.

When to replace

Disconnect cleaner from electrical

outlet.

To check belt, remove bottom plate as

shown in “How to replace.” Replace

belt if it is stretched, cut or broken.

What to buy

To assure effective operation, use only

genuine HOOVER belts with your

cleaner. When purchasing a new belt,

ask for HOOVER part No. 38528033.

How to replace

Disconnect cleaner from electrical

outlet.

Place handle in low position and turn

cleaner over so bottom side is up.

Remove the 4 screws as shown with a

Phillips screw driver.

Lift off bottom plate (A).

Removing belt

Remove agitator brush roll and used

belt.

Discard used belt.

3-14

3-15

Headlight replacement

What to buy

This cleaner uses a 12 volt, wedge base

type 912 bulb, HOOVER part No.

27313101.

Removing lens

Disconnect cleaner from electrical

outlet.

Using a screwdriver, remove the two

screws as shown and lift off lens.

Installing bulb

Pull old bulb straight out of socket.

Push new bulb straight into socket until

locked in place

Excessive force is not required.

3-16

Check agitator shield

Because your cleaner picks up so well,

we strongly recommend you check for

debris accumulation under the agitator

shield each time you clean the filters.

Removing debris under the shield will

help maintain your cleaner’s excellent

pick up and suction. Remove debris as

follows:

1. Disconnect cleaner from electrical

outlet.

2. Check for dirt accumulation by

removing bottom plate (Fig. 3-17),

removing agitator (Fig. 3-18), and lifting

agitator shield (Fig. 3-20).

3. Remove any debris and replace

shield, agitator and bottom plate (Figs.

3-20 to 3-22).

Andere Handbücher für U5753900

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Hoover Staubsauger Handbücher

Hoover

Hoover ONEPWR EVOLVE PET ELITE Bedienungsanleitung

Hoover

Hoover JOVIS Bedienungsanleitung

Hoover

Hoover WINDTUNNEL TANGLE GUARD UH77110 Bedienungsanleitung

Hoover

Hoover Legacy Supreme S2200 Bedienungsanleitung

Hoover

Hoover H-GO 300 HYDRO Bedienungsanleitung

Hoover

Hoover Vacuum cleaner Bedienungsanleitung

Hoover

Hoover Jazz Dry SM18DL4 Bedienungsanleitung

Hoover

Hoover Pet Max Complete Bedienungsanleitung

Hoover

Hoover Air Revolve Bedienungsanleitung

Hoover

Hoover HC1600 Installationsanleitung

Hoover

Hoover ST70ST01001 Bedienungsanleitung

Hoover

Hoover ONEPWR BH15020 Bedienungsanleitung

Hoover

Hoover SteamVac F7412-900 Bedienungsanleitung

Hoover

Hoover U5175900 - Fold Away Widepath Upright Vacuum... Bedienungsanleitung

Hoover

Hoover SteamVac with Clean Surge F5914-900 Bedienungsanleitung

Hoover

Hoover Vacuum cleaner Bedienungsanleitung

Hoover

Hoover athos activ ATC18LI Bedienungsanleitung

Hoover

Hoover L2310 - GUV 10 Amp Lon Garage Utility Vacuum Bedienungsanleitung

Hoover

Hoover HGO320H 011 Bedienungsanleitung

Hoover

Hoover CLEANSLATE FH14052V Bedienungsanleitung

Hoover

Hoover UH73510 Bedienungsanleitung

Hoover

Hoover FloorMate Deluxe Bedienungsanleitung

Hoover

Hoover PROFESSIONAL Series Bedienungsanleitung

Hoover

Hoover HC2200D Installationsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch