Hoover UH40110 Bedienungsanleitung

Owner'sManual

Operating and Servicing Instructions

ii,, i i i i lluillllllllll,lllllll

www.hoover.com

Pleasereview this manual before operating your Hoover® product.

I I IIIIIIIII i II I IIIIII iiiiii I I

Thank you for choosing

Please enter the complete model and serial

numbers in the spaces provided.

Model

Serial Number

Hint: Attach your sales receipt to this owner's

manual. Verification of date of purchase

may be required for warranty service of your

HOOVER product.

HOOVER°product.

Serial Number "_

Be sure to fill out and return the product registration card included with your cleaner.

Contents

Assembling Cleaner ....................................................... 4

Carton Contents .......................................................... 4

Cleaner Descriptions ...................................................... 5

How To Use .......................................................... .5-8

Cleaning Tools ........................................................ 7

Carpet Height Adjustment .............................................. 6

Custom ControF" Switch ................................................ 6

If You Have a Problem .................................................... 16

Clearing Blockages ................................................... 13

Irnportant Safeguards ..................................................... 3

Lubrication ............................................................. 17

Maintenance

Authorized Service ................................................... 18

Cleaning filter ....................................................... 11

Emptying Dirt Cup .................................................... 9

Replacing Agitator Brush Roll ........................................... 12

Replacing Brush Roll Belt .............................................. 13

Replacing Powered Hand Tool

Agitator Brush Roll .................................................. 14

Replacing Power Hand Too] Belt ......................................... 15

Replacing Headlight .................................................. 12

Thermal Protector ....................................................... 16

Parts _ accessories mail order form ......................................... 19

If you need assistance:

Visit our website at hoover.com. Follow the service center link to find the service outlet

nearest you OR Call 1-800-944-9200 for an automated referral of authorized service outlet

locations (U.S. only) OR Call 1-800-263-6376 to speak with a representative in our Consumer

Response Center; Mon-Fri 8am-7pm EST.

Please do not return this product tO the store.

This carpet cleaner is intended for household use.

Not intended for commercial use in any household or for any other commercial purpose.

Operate carpet cleaner only at voltage specified on data plate on back of cleane r.

Plug carpet cleaner into a properly 9rounded outlet.

Important Instructions

When usiTIg all electrical appliance, always follow basic precautions, in¢ludin_ the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

WARNING: To,_du_ the risk of fire, electricshock, orinjury:

• Do not use outdoors or on wet surfaces.

• Close supervision is necessary when any appliance is used by or near children. Do not

allow vacuum cleaner to be used as a toy.

•Do not run unattended at any time.

• Keep hair, loose clothing, fingers, feet and all parts of body away from openings, rotating

agitator and other moving parts.

• Donot pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

- Do not use to pick up flammable or combustible materials such as gasoline or fine "wood

sandings or use in areas where they may be present.

• Always turn off this appliance before connecting or disconnecting hose.

• Unplug cleaner before connecting the powered hand tool.

• Do not use without dirt cup or filters in place, Empty cup and clean filter frequently

when picking up very fine materials such as powder.

•Use extra care when cleaning on stairs.

• Do not put any object into openings. Do not use with any opening blocked; keep free of

dust, lint, hair, or anything that may reduce air flow.

• Always disconnect cord from electrical outlet before servicing the cleaner.

-Always unplug cleaner when not in use. Turn off all controls before unplugging.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Never handle

plug or appliance with wet hands.

• The use of an extension cord is not recommended.

• Do not use with damaged cord or plug. If appliance is not working as it should, has been

dropped,damaged,left outdoors,or dropped into water, take it to aHoover Salesand

Service Center or Authorized Hoover Warranty Service Dealer {Depot).

• Do not pull or caw by cord, use cord as a handle, dose door on cord or pull cord around

sharp edges or comers. Do not run appliance over cord. Keep cord away from heated surfaces,

! lose vacuum cleaner only for its intended use as described in the instructions. Use only

attachments recommended by Hoover; others mW cause hazards.

WARNING:

• This product contains chemicals known to the State of California to cause cancer and

reproductive toxicity. Wash hands after handling.

• Do not operate cleaner in bare feet or when wearing open toe shoes or sandals.

• Avoid picking up hard, sharp objects with the cleaner, They may damage the cleaner.

Save these instructions!

1. Assembling cleaner

Carton contents

Empty carton. Find the parts shown below

before disposing of packing materials.

Cleaner assembly

A. Handle section

B. Cleaner body

C. Hose holder

Accessory packs

The accessories are packed on the cleaner.

E G

D. Hose

E. Dusting brush

F. Furniture nozzle

6. Powered hand tool

H. Extension wand

1. Crevice wand

Disconnect cleaner from electrical outlet.

Remove cardboard (A) and four screws from

handle section, Discard cardboard, but keep

screws for assembly (Figs. 1-6 and 1-7).

Snap tabs on hose

holder (B) into

holes on handle

section.

Slide handle section

onto back of

handle.

Push screws into holes on back of handle

[Fig. 1-6) and hose holder {Piff. 1-7}.

Tighten screws securely with a Phillips

screwdriver.

holder.

2. How to use

Cleaner description

Operate cleaner only at voltage specified on

data plate on bottom of cleaner.

The assembled cleaner will look like the

drawing.

1.Handle

2. Custom Control TM powerswitch 7

3. Custom Control TM indicator 6

4. Tool cover

5. Dusting brush

6.Powered hand tool

7.Furniture nozzle 9

8. Dirt cup s

9. Dirt cup handle

10. HEPA cartridge filter

1I.Pre-filter 12

12. Final filter

13. Three position handle release pedal: step t4

on lever to lower handle to operating or

low positions.

14. Nozzle control knob: rotate knob to cot- 15

rectsettingfor heightofcarpetbeing

cleaned.

15. Furniture guard

16. Headlight

I7. Hose

18. Hose holder

19. Cord hooks: wrap cord around hooks for

storage. The top hook rotates right or

left for easy cord release.

20. Extension wand

21. Crevice wand: stores in wand, 21

"some modelsonly, 20

This cleaner is intended for householduse.

Not intendedfor commercial usein any

householdorfor any other commercial

purpose. 19

Polarized plug

To reduce the risk of electric shock, this appli-

ance has a polarized plug (one blade is wider

than the other). This plug will fit in a polar-

ized outlet onlyone way. If the plug does not

fit fully in the outlet, reverse the plug. lfit

still does not fit, contact aqualified electrician

to install the proper outlet. Do not change the

plug in any way.

Custom Control TMswitch

Plug cord into electrical outlet.

CARPET setting - turns brush roIt on, for cleaning carpets and rugs.

{Brush roll will automatically stop turning when handle is raised to

upright position.) BARE FLOOR setting - turns brush roll ObT:for dean-

ing hard surfaet floors.

Brush roll automatic shut-off

If something gets caught in the brush roll, the cleaner will automatically

turn off. Slide the Custom ControF" switch to OFF. Unplug the cleaner.

Remove obstruction from brush roll and continue cleaning.

Transporting

cleaner

Put handle in

upright position.

Tilt cleaner back on

rear wheels. Push

forward.

Carrying

cleaner

Use the carrying

handle to ]ift the

cleaner.

Do nut lift cleaner

using dirt cup

handle {A).

Handle positions

The handle of your cleaner has three posi-

tions; upright for storage and when using

cleaning tools; operating position for general

operation on carpet and floors; low for

reaching under low furniture. Step on han-

dle release lever to lower handle.

Carpet height adjustment

The cleaning of car-

pet and rugs takes

place at the nozzle

(C),

When it is necessary

to raise and lower

the nozzle for vari-

ous carpet pile

heights, turn the

nozzle control knob

_} to the desired

Settings

For maximum cleaning performance, the

following carpet height settings are recom-

mended.

Handle position

For ease in sliding

knob, place handle

in the upright posi-

tion and tilt cleaner

backward.

Low/Hard Surface: for bare floors and all

types of carpet

Note: If the cleaner is difficu]t to push, turn

knob to the next higher setting.

High Pile: for very

deep pi!e carpet

where easter push-

ing effort is

desired, while

maintaining good

cleaning perfor-

nlance.

Cleaning lightweight

flexible rugs Stand on one end of rug and move cleaner

toward other end or edge. Before reaching

edge, push down on handle. This will lift up

the nozzle (front of cleaner) and will prevent

rug from clinging to cleaner. Continue to lift

up nozzle so that when you have reached the

edge, it is completely off the rug. Move

cleaner back to start again, lower nozzle, and

use only forward strokes.

Cleaning tools

When using cleaning too}s, cleaner handle

shouldbe in the upright positionto activate

the automatic "brush roll automatic shut

off' and for conveniencein movingthe

cleaner from one area to another.

Turn cleaner OFF

before disconnect-

ing and connecting

hose to hose tube

(A),

To use hose, lift

hose end as shown.

__A B_C

[ [[[ _ }E

Selectpropertool

A. Dusting brush may be used for carved

furniture, table tops, books, lamps, lighting

fixtures, venetian blinds, baseboards, shut-

ters, and registers,

B. Furniture nozzle may be used for uphol-

stered furniture, draperies, mattresses,

clothing, automobile interiors, and carpeted

stairs.

C. Powered hand tool may be used for

upholstered furniture, carpeted staiTs and

hard-to-reach places.

O. Crevice wand can be used in tight spaces,

corners and along edges in such places as

dresser drawers, upholstered furniture,

stairs, and baseboards. It can also be used

for extra reach with the dusting brush and]

or extension wand.

E. Wand is used to give extra length to your

hose. Use it with any of the above tools.

Attach wand andtools Howto cleantools

To clean the hose and the powered hand

tool, wipe off dirt with a cloth dampened in

a mild detergent, Rinse with a damp cloth.

Do not submerge powered hand tool in

water.

Cleaning tools may be washed in warm

water with a detergent. Rinse and air dry

before using.

Attach tool or wand to the hose [A) by

pushin 9 it firmly into hose,

Attach second wand or tool to wand [BIby

pushing it firmly onto the wand,

Twist wand or tool slightly to tighten or

loosen the connection,

Extra reach hose

(available at additional cost if not included

with your cleaner)

Stair cleaning

Push Custom Control TM switch to OFF posi-

tion.

Align end of extra reach hose with projec-

tions (C] over slots [D] on end of attached

hose,

Slide hose into slots and twist hose to lock

it in place, [To detach hose, reverse proce-

dure.}

Attach wands or tools to the other end of

hose.

Use the hose and powered hand tool or fur-

niture nozzle for stair cleaning.

CAUTION: To prevent the cleaner from fall-

ing, alwaysplace it at the bottom of the

stairs,

With handle in upright position, clean from

bottom to top.

How to attach tool cover

The tool cover is designed with a "break-

away" feature which allows it to snap free if it

is pushed open too far,

To reattach, align hinges of cover with slots on

sides of tool storage area,

Push cover down to secure in place,

3. Maintenance

Familiarize yourself with these home main-

tenance tasks. Proper use and care of your

cleaner will ensure continued cleaning

effectiveness,

Dirt cup

The dirt cup assembly consists of the follow-

ing parts:

Ud (A)

Dirt Cup (B]

Pre-filter (C)

HEPA Cartridge Filter (D)

Dirt Opening (E)

Handle [F)

While the cleaner is in operation, the pro- filter

semen wilt stop larger debris from entering the

HEPA cartridge filter chamber, This larger debris

will be seen collecting in the left side of the dirt

cup. The HEPA cartridge filter will collect fine

particles that have passed through the pre-fitter

se_eeno

When to empty

We recommend that the dirt cup be emp-

tied before the dirt reaches the dirt opening

on hack of cup (Fig. 3-1] or after every use

if you prefer.

CAUTION: Very fine materials, suchas

face powderor cornstarch,may sealthe

filter and causelossof suction.When

usingthe cleaner for this type of dust,

empty the cup and clean the filters often.

Howto empty

Disconnectcleaner

from electrical out-

let. Do not use

cleaner without dirt

cup or filters in

place,

Remove cup - Lift

up slightly and

firmlypull cup

straight out.

Clean filter -Turn Empty cup -

knob (A) on top of Remove lid,

dirt cup lid one full Note: It is not nec-

turn. essary to remove

the HEPA cartridge

filter to empty the

dirt cup.

Tap side of cup

until no more dust

particles fail from

the HEPA cartridge

filter.

Replace cup -

Replace dirt cup

lid.

Slide cup into

place,

Press firmly until

cup locks in place.

Filter assembly

The HEPA cartridge filter and pre-filter are

essentiaIIy self-shedding.

Tapping the side of the dirt cup as described

in "How to empty dirt cup" should suffi-

ciently remove dust and fine particles from

the HEPA cartridge filter and pre-filter.

The filter assembly can also be removed for

additional cleaning.

Howto cleanfilter assembly

Remove dirt cup

and dirt cup lid as

described in "How

to empty dirt cup."

Grasp pre-filter

frame and pull up

firmly. Slidefilter

assemb]y out of

cup.

%-%,

Grasp end of HEPA cartridge filter and pull

it away from pre-filter. Remove cartridge

from assembly.

The pre-filter (A) can be cleaned with a

brush and then rinsed with water, Allow pre-

filter to dry thoroughly.

Clean the HEPA

cartridge filter by

tapping either of

the ends.

DO NOTtap soft

pleated sides of

HEPAcartridge fil-

ter as this could

damage the filter.

Tap filter until no

more dust particles

fall from the filter.

DO NOT rinseHEPA

cartridge filter with

water.

To re-assemble fil-

ter assembly,place

large knob of HEPA

cartridge filter in

hole on bottom of

pre-filter.

Snap top of HEPA

cartridge filter into

place.

Align grooves {A}

on pre-filter frame

with grooves (B} in

dirt cup,

Slide filter assem-

bly down into cup

until alight snap is

felt. Gently pull up

on assembly to

ensure that it is

seated properly in

the cup. Ensure

that no part of pre-

fiIter screen

extends above top

edge of dirt cup.

Replace lid and return cup to cleaner (Fig.

3-5).

Note: If dirt cup lid does not close all the

way, ensure that filter assembly is pushed

down all the way. Turn knob on lid until lid

closes (Fig. 3-3}.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Hoover Staubsauger Handbücher

Hoover

Hoover UH20020 Bedienungsanleitung

Hoover

Hoover FloorMAX FloorMAX Supreme Bedienungsanleitung

Hoover

Hoover SmartWash Pet Complete Bedienungsanleitung

Hoover

Hoover Stick Vacuum Bedienungsanleitung

Hoover

Hoover 7011PH Allergy Bedienungsanleitung

Hoover

Hoover CLEANJET EVO Bedienungsanleitung

Hoover

Hoover 5014 pets Bedienungsanleitung

Hoover

Hoover WindTunnel S3755 Bedienungsanleitung

Hoover

Hoover U8371900 - WindTunnel 2 Complete Bagless Upright... Bedienungsanleitung

Hoover

Hoover Platinum Collection Bedienungsanleitung

Hoover

Hoover KS40PAR Bedienungsanleitung

Hoover

Hoover SRC144LB Bedienungsanleitung

Hoover

Hoover ONEPWR FLOORMATE JET Bedienungsanleitung

Hoover

Hoover HydroPower Series Bedienungsanleitung

Hoover

Hoover Presto 2-in-1 Bedienungsanleitung

Hoover

Hoover Velocity Evo Bedienungsanleitung

Hoover

Hoover ZOOM Bedienungsanleitung

Hoover

Hoover FH14050 Bedienungsanleitung

Hoover

Hoover Telios TTE2203 Bedienungsanleitung

Hoover

Hoover HC-P5-HKA Bedienungsanleitung

Hoover

Hoover CH82005 Bedienungsanleitung

Hoover

Hoover SteamVac deluxe Bedienungsanleitung

Hoover

Hoover TASKVAC CH20110 Bedienungsanleitung

Hoover

Hoover BR25HM Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch