Hoover UH70040 Bedienungsanleitung

Cyclonic Upright

Vacuum Cleaner

Aspirateur vertical

cyclonique

Owner's Manual

ENGLISH ,,_ pp. 1-15

ESPANOL ,,_ pag 1624

FRANCAIS ,,_ p 2532

Contents

Assembling Cleaner .......................... 3-4

Carton Contents ................................ 3

How To Use ........................................ 5-8

Cleaner Descriptions ........................ 5

Cleaning Tools ................................ 7-8

If You Have a Problem ........................ 14

Important Safeguards .......................... 2

Lubrication .......................................... 14

Maintenance .................................... 8-13

Authorized Service .......................... 14

Cleaning Filters ............................ 9-10

Clearing Blockages ........................ 15

Emptying Dirt Cup .......................... 8-9

Replacing Agitator Brush Roll ..11-12

Replacing Belt ............................ 10-11

Replacing Powered Hand Tool

Agitator Brush Roll ...................... 12

Replacing Power Hand Tool Belt ..13

Replacing Headlight ........................ 10

Thermal Protector .............................. 14

Warranty .............................................. 15

Parts & accessories mail reorder

form .................................................. 33

hoover.com

hoover.ca

Review this manual before

operating the cleaner.

Lire attentivement ces instructions

avant d'utiliser I'appareil.

Review this manual before

operating cleaner

Thank you for choosing

a HOOVER® product

Please enter the COMPLETE model and serial numbers in the spaces provided.

Model

Serial number

Hint: Attach your sales receipt to this owner's manual.

Verification of date of purchase may be required for warranty service of your

HOOVER product.

Be sure to fill out and return the product registration card included with your

cleaner (see back cover). important Safeguards!

When using an electrical appliance, always follow basic precautions, includingthe following:

READ ALL iNSTRUCTiONS BEFORE USING THiS APPLIANCE

[] To reduce the risk of fire, electric shock, or injury:

. Do not use outdoors or on wet surfaces.

. Close supervision is necessary when any appliance is used by or near children. Do not allow vacuum cleaner to be used as a

toy or to run unattended at any time.

. Keep hair, loose clothing, fingers, feet and all parts of body away from openings, rotating agitator and other moving parts.

. Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

. Do not use to pick up flammable or combustible materials such as gasoline or fine wood sandings or use in areas where they

may be present.

. Always turn off this appliance before connecting or disconnecting hose.

. Unplug cleaner before connecting the powered hand tool.

. Do not use without dirt cup or filters in place. Empty cup and clean filter frequently when picking up very fine materials such

as powder.

. Use extra care when cleaning on stairs.

. Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, or anything that may

reduce air flow.

. Always disconnect cord from electrical outlet before servicing the cleaner.

. Unplug cleaner when not in use. Turn off all controls before unplugging.

. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Never handle plug or appliance with wet hands.

. The use of an extension cord is not recommended.

. Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or

dropped into water, take it to a Hoover Sales and Service Center or Authorized Hoover Warranty Service Dealer (Depot).

. Do not pull or carry by cord, use cord as ahandle, close door on cord or pull cord around sharp edges or corners. Do not run

appliance over cord. Keep cord away from heated surfaces.

. Use vacuum cleaner only for its intended use as described in the instructions. Use only attachments recommended by

Hoover; others may cause hazards.

. Hold plug when rewinding cord onto cord reel. Do not allow plug to whip when rewinding.

WARNING:

. This product contains chemicals known to the State of California to cause cancer and reproductive toxicity. Wash hands after

handling.

.Do not operate cleaner in bare feet or when wearing open toe shoes or sandals.

.Avoid picking up hard, sharp objects with the cleaner. They may damage the cleaner.

Save these instructions!

2 hoover.com

If you need any assistance:

Visit our website at hoover.com. Click on the "Service" button to find the service outlet

nearest you OR

Call 1-800-944-9200 for an automated referral of authorized service outlet locations (U.S. only) OR

Call 1-330-499-9499 to speak with a representative in our Consumer Response Center.

Please do not return this product to the store.

Carton contents

i-i

_J O

)

r.,___..]:d=m: l,..],lq ,,, =[0]: kl i=[, •

_ 1._2

f .... _

Remove dirt cup (A) from upper

housing (B) by pressing dirt cup

release button (C) and pivoting cup

out, Set dirt cup aside,

Using a Phillips screwdriver, remove

(3) screws from cleaner base, DO

NOT DISPOSE OF SCREWS.

Remove cardboard and discard,

A. Handle section

B. Cleaner base assembly

C. Cleaner upper housing assembly

D. Cleaning tools and wands

E. Hose

Remove all parts from carton and

identify each item shown.

Make sure all parts are located before

disposing of packing materials.

Align upper housing (D) over cleaner

base (E) and slide down until upper

housing sits securely over base,

Using a Phillips screwdriver, fasten

(3) screws located at the bottom of

the upper housing,

Place bottom of dirt cup into cleaner

body first, Pivot cup into cleaner

body,

Press on dirt cup release button

while firmly pressing on dirt cup,

Release button in order for it to

return to proper position and lock

the dirt cup into place,

Continued -_

_o]..1 _ [o] !•! [o].._:-.]

Align end of hose with projections

(A) over slots on dirt duct (B),

Slide hose into slots and twist hose

to lock it into place (Todetach hose,

reverse procedure),

E !IB

IdS:]

Position hose over rack (C) and into

hose tube (D),

NOTE: Hose must be connected at

the hose tube (D) and at the dirt

duct (B) on the back of the cleaner

for carpet or floor cleaning. For

tool use, refer to Fig, 2-11,

A,1 I

Note: The plug will only fit together

one way, If plug is not fitting togeth-

er, check alignment of ends,

After the plug ends are fully con-

nected, the orange tie wrap (A)

must be removed,

Use caution so as NOT TO CUT

the black power cord. Discard the

orange tie wrap,

DO NOT remove orange tie wrap

until step 1-11 is complete,

Grasp orange tie wrap (A) and pull

until the black plug (B) comes out of

the handle cavity,

Hold plug (B) with one hand; upper

handle (C) with other hand,

Push plug into upper handle, align-

ing with opposite end of plug and

push firmly UNTIL YOU HEAR A

SNAP OR A CLICK.

After ends are connected, pull on

plug to make sure it is securely

attached,

Align the groove (D) on the back of

the upper handle with the small pro-

_ectiqn (E) on the back of the handle

nouslng,

Press button (F) at handle base and

push handle all the way down, Position tools

Place smaller diameter end of wand

(A) into bottom of rack, Snap wand

into clip at top, Repeat with other

wand,

Crevice tool (B) fits into one of the

extension wands,

Fit combination tool (C) and pow-

ered hand tool (D) into storage

areas on side of cleaner as shown,

Cleaner description

1. Soft touch handle grip

2. ON/OFF switch

3. Telescoping handle

4. Handle adjustment

button

5. Carrying handle

6. Dirt cup release button

7. Dirt cup assembly

8. Cord reel window

9. Headlight

10. Agitator brush roll

shut-off indicator

11. Agitator brush roll

shut-off pedal

12. Furniture guard: helps

prevent cleaner from mark-

ing furniture.

13. Nozzle control knob:

turn knob to correct setting

for height of carpet being

(:leaned.

14. Final filter access

15. Hose handle

16. Hose

17. Hose/tool holder

18. Crevice tool

19. Wands

20. Cord reel

21. Soft touch wheels

22. Handle release pedal:

step on lever to lower handle

to operating or low positions.

23. Cord rewind button: press

button to rewind cord for stor-

age Hold plug until cord is

rewound.

24. Combination tool

25. Powered hand tool

Operate cleaner only at

voltage specified on data

plate on back of cleaner.

This cleaner is intended for

household use.

Polarized plug

To reduce the risk of electric shock,

this appliance has a polarized plug

(one blade is wider than the other),

This plug will fit in a polarized outlet

only one way, If the plug does not fit

fully in the outlet, reverse the plug, If

it still does not fit, contact a qualified

electrician to install the proper out-

let, Do not change the plug in any

way,

ON.OFF switch

Plug cord into electrical outlet,

Toturn cleaner ON, push ON/OFF

switch once,

Toturn cleaner OFF, push switch

again,

The cleaner is shipped with the agi-

tator brush roll in the OFF position,

To turn the agitator brush roll ON,

step on the pedal (A), The indicator

(B) will show red in the "brush roll

on" window,

Continued -_ s

Cord rewind

Grasp the end of the plug and pull

to release cord from cord reel, After

desired cord length is reached, the

cord will lock into position,

To return cord for storage, hold plug

and press on button (A) at top of

cord reel, To prevent cord from

whipping, hold plug until cord is

rewound.

Telescoping handle

The telescoping handle includes

adjustable settings to various

heights for user comfort, The handle

is designed to retract into the body

of the cleaner for convenience in

storing or carrying the cleaner,

Lower the handle by depressing the

button (B) located at the handle

base and pushing the handle down,

Raise the handle by depressing the

button and pulling the handle

upward, locking it into the desired

position,

Transporting cleaner

To move your cleaner from room to

room, put handle in upright position,

tilt cleaner back on rear wheels and

push forward,

Carrying cleaner

The cleaner can also be moved by

using the carrying handle,

Handle positions

The handle of-your cleaner has

three positions; upright for storage

and when using cleaning tools;

operating position for general

operation on carpet and floors; low

for reaching under low furniture,

Step on handle release lever to

lower handle,

Carpet height

adjustment

The cleaning of carpet and rugs

takes place at the nozzle (C),

When it is necessary to raise and

lower the nozzle for various carpet

pile heights, turn the nozzle control

knob (D) to the desired setting,

push, turn knob to the next higher

setting,

•Higher settings: for very deep

pile carpet, where easier pushing

effort is desired, while maintaining

good cleaning performance,

,Settings

For maximum cleaning perfor-

mance, the following carpet height

settings are recommended:

• Lowest setting: for all types of

carpet,

Note: If the cleaner is difficult to

Agitator brush roll

shut.off

The agitator brush roll shuts off auto-

matically for tool use, when the

cleaner is in the upright position,

To manually shut off the agitator

brush roll for cleaning hard floors,

step on the pedal (E), The indicator

(F) will show red in the "brush roll

off" window, To turn the agitator

brush roll on, step on the pedal

again, The indicator will show red in

the "brush roll on" window,

Cleaning lightweight

flexible rugs

Stand on one end of rug and move

cleaner toward other end or edge,

Before reaching edge, push down

on handle, This will lift up the nozzle

(front of cleaner) as shown and will

prevent rug from clinging to cleaner,

Continue to lift up nozzle so that

when you have reached the edge, it

is completely off the rug, Move

cleaner back to start again, lower

nozzle, and use only forward

strokes,

Cleaning tools

Tools allow for cleaning surfaces

above the floor and for reaching

hard to clean areas,

The cleaner is ready for tool use

when handle is in upright

position,

The agitator brush roll will not

rotate when the cleaner is in the

upright position or the if the agi-

tator brush roll shut off indicator

is in the OFF position when the

handle is lowered.

How to clean tools

To clean the hose and powered

hand tool, wipe off dirt with a cloth

dampened in a mild detergent,

Rinse with a damp cloth, DO NOT

submerge powered hand tool in

water,

Cleaning tools may be washed in

warm water with a detergent, Rinse

and air dry before using,

Removing hose

When using cleaning tools, place

cleaner handle in the upright posi-

tion. The agitator brush roll will

not rotate when the cleaner is in

the upright position. Also, turn

cleaner OFF before disconnecting

and connecting hose to hose tube

(G).

To use hose, lift hose end (H) as

shown,

When you are finished cleaning with

the tools, reposition hose end into

tube,

..........._ j K

IN: )

)

Select proper tool

I. Combination tool use with brush

for carved furniture, table tops,

books, lamps, lighting fixtures,

venetian blinds, baseboards, shut-

ters, and registers,

Remove brush (Fig, 2-1 5) to clean

upholstered furniture, draperies,

mattresses, clothing, and carpeted

stairs,

J. Powered hand tool may be used

for upholstered furniture, draperies,

mattresses, clothing, automobile

interiors, and carpeted stairs,

K. Crevice tool may be used in

tight spaces, corners and along

edges in such places as dresser

drawers, upholstered furniture,

stairs and baseboards,

L. Wands are used to give extra

length to your hose, Use them with

any of the above tools,

Combination tool

Slide brush to remove,

To replace brushes, align bottom of

brush with grooves (M) on tool, Slide

brush into place,

Continued -_ 7

Extra Reach TM hose

(available at additional cost)

The Extra Reach TM hose provides

easier cleaninc of stairs and hard to

reach places, Follow the steps

below for attachinc and detaching

the Extra Reach TM hose,

Turn cleaner OFF before discon-

necting and connecting hose.

Remove hose end from dirt duct (A),

Align end of Extra Reach TM hose

with projections (B) over slots on dirt

duct (C), Slide hose into slots and

twist hose to lock it into place,

Align end of hose with projections

(D) over slots (E) on Extra Reach TM

hose, Slide hose into slots and twist

hose to lock it into place, (Todetach

hose, reverse procedure),

Attach wands or tools to the other

end of hose,

NOTE: Hose must be connected to

dirt duct and hose tube after

removing Extra Reach TM hose for

carpet or floor cleaning.

Attach wand and tools

Attach tool or wand to the hose (F),

Attach tool to wand (G) by pushing

it firmly onto the wand,

Twist wand or tool slightly to tighten

or loosen the connection,

Stair cleaning

Use the hose and powered hand

tool for stair cleaning, Clean from

bottom to top,

CAUTION: To avoid personal

injury or unnecessary wear to car-

pet, and to prevent the cleaner

from falling, always place it at bot-

tom of stairs.

Familiarize yourself with these home

maintenance tasks as proper use

and care of your cleaner will ensure

continued cleaning effectiveness,

r_l f

______

,x--

,tcz::::::S

Dirt cup

When to empty

It is recommended that the dirt cup

be emptied before the dirt reaches

the fill line (A), or after every use if

preferred, Place the cleaner in the

upright position before removing the

dirt cup,

Disconnect cleaner from electrical

outlet. Do not use cleaner without

dirt cup or filters in place.

CAUTION: Very fine materials,

such as face powder or corn-

starch, may seal the filter and

cause loss of suction. When using

the cleaner for this type of dust,

empty the cup and clean the fil-

ters often.

How to empty

Press dirt cup release button (B)

and pivot cup out,

Holding dirt cup over trash recepta-

cle, press dirt cup door release but-

ton (C) to open dirt cup door (D),

Close door and press dirt cup door

release button to latch dirt cup door

closed,

Place bottom of dirt cup into cleaner

body first, Pivot cup into cleaner

body,

Press on dirt cup release button

while firmly pressing on dirt cup,

Release button in order for it to

return to proper position and lock

the dirt cup into place,

Cleaning filters

Cyclonic filter assembly

How to clean

Disconnect cleaner from electrical out-

let. Do not use cleaner without dirt cup

or filters in place.

Remove dirt cup as described in Fig, 3-2,

Twist filter assembly (A) counterclock-

wise, Remove assembly from dirt cup,

"-A

Dirt and debris can be cleaned from

the filter assembly by brushing with

the cleaner's combination tool,

Place the filter assembly on the dirt

cup, aligning (3) tabs (A) on filter

with (3) slots on dirt cup (B) and

twist it clockwise to secure into

position, Press dirt cup door release

button (C) to latch dirt cup door

closed,

Replace dirt cup as described in

Figs, 3-4 & 3-5,

Secondary filter

How to clean

Disconnect cleaner from electrical

outlet. Do not operate cleaner

without dirt cup or filters in place.

Remove dirt cup as described in

Fig, 3-2,

With thumb, slide latch (A) located

at the top of the housing to the right

and pull down to remove gray filter

frame, Remove black foam filter,

Rinse filter frame cartridge and foam

filter under cold water,

Allow both filter frame and filter to air

dry for 24 hours before replacing fil-

ter into filter frame, Reposition filter

frame cartridge by inserting tabs (B)

into slots on back of housing, Rotate

filter cartridge frame up toward top

of housing and snap closed,

What to buy

When purchasing a new secondary

filter cartridge, ask for HOOVER

part No. 93002517. To purchase a

new black foam filter, ask for

HOOVER part No. 93002518. Continued -_

HEPA Final filter

How to clean

Disconnect cleaner from electrical

outlet. Do not operate cleaner

without dirt cup or filters in place.

What to buy

When purchasing a new HEPA

filter cartridge, ask for HOOVER

part No. 93002360.

Headlight replace.

ment

What to buy

This cleaner uses a 13 volt, T-3 114

wedge base bulb, Hoover part No.

27313-107

With fingers in slots, pull filter frame

(A) straight out,

Dirt and debris can be cleaned from

the filter cartridge by brushing with

the cleaner's combination tool, DO

NOT RINSE OR WASH the HEPA

filter cartridge.

Slide back into position on cleaner,

Removing lens

Disconnect cleaner from electrical

outlet.

Press handle release pedal and

place handle in low position,

Using a Phillips screwdriver, remove

the the screw as shown and lift off

lens,

Installing bulb

Pull old bulb straight out of socket,

Push new bulb straight into socket

until locked in place,

Excessive force is not required.

Replacing lens

Reposition lens and secure with the

screw,

Belt replacement

The belts are located under the bot-

tom plate of the cleaner and should

be checked from time to time to be

sure they are in good condition,

The flat (wide) belt is described

below; the other belt is described

under "Agitator brush roll",

When to replace

Disconnect cleaner from electrical

outlet. WARNING: Agitator brush

roll can start suddenly. Unplug

cleaner before turning it over.

To check the flat belt, remove bot-

tom plate as shown in "Replacing

flat belt", Replace belt if it is

stretched, cut or broken,

What to buy

To assure effective operation, use

only genuine HOOVER belts with

your cleaner, When purchasing a

new belt, ask for Flat belt - HOOVER

part No. 40201-271,

Andere Hoover Staubsauger Handbücher

Hoover

Hoover E1 Bedienungsanleitung

Hoover

Hoover HT85-T3-ME Bedienungsanleitung

Hoover

Hoover POWER SCRUB Bedienungsanleitung

Hoover

Hoover Flexi Power SU204BR2 Bedienungsanleitung

Hoover

Hoover CAPTURE Bedienungsanleitung

Hoover

Hoover H-FREE 500 Bedienungsanleitung

Hoover

Hoover Deep Cleaner Bedienungsanleitung

Hoover

Hoover SI216RB Bedienungsanleitung

Hoover

Hoover U5269900 - Inc/Tti Floor Care Empower Bagless... Bedienungsanleitung

Hoover

Hoover U5725960 Bedienungsanleitung

Hoover

Hoover UH70603 Bedienungsanleitung

Hoover

Hoover presto Bedienungsanleitung

Hoover

Hoover FREEJET 3in1 FJ120R2 Bedienungsanleitung

Hoover

Hoover TELIOS EXTRA LITE Bedienungsanleitung

Hoover

Hoover CP70 Bedienungsanleitung

Hoover

Hoover zenith Bedienungsanleitung

Hoover

Hoover POWER SCRUB XL Bedienungsanleitung

Hoover

Hoover SPIRIT Bedienungsanleitung

Hoover

Hoover Guardsman U4125 Bedienungsanleitung

Hoover

Hoover EMERGE Bedienungsanleitung

Hoover

Hoover ST71 ST20011 Synthesis Bedienungsanleitung

Hoover

Hoover HF522NPW 011 Bedienungsanleitung

Hoover

Hoover UH70200 Bedienungsanleitung

Hoover

Hoover 59144003 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung