HP Aruba UXI G Series Montageanleitung

MF877-00 Page 1

Template Revision C, 30-July-2018

HPE instructions for this template are available at MF877-01

Product End-of-Life Disassembly Instructions

Product Category

: Networking

Marketing Name / Model

[List multiple models if applicable.]

Aruba UXI G-Series .11ax+Eth+Cell Sensor

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions

for the disassembly of HPE products to remove components and materials requiring selective treatment, as defined by

Directive 2012/19/EU of the European Parliament and of the Council on Waste Electrical and Electronic Equipment

(WEEE).

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as

applicable.

Item Description Notes

Quantity

of items

included

in product

Printed Circuit Boards (PCB) or Printed Circuit

Assemblies (PCA)

With a surface greater than 10 sq cm

Batteries

All types including standard alkaline and lithium

coin or button style batteries

Mercury-containing components

For example, mercury in lamps, display backlights,

scanner lamps, switches, batteries

Liquid Crystal Displays (LCD) with a surface

greater than 100 sq cm

Includes background illuminated displays with gas

discharge lamps

Cathode Ray Tubes (CRT)

Capacitors / condensers (Containing PCB/PCT)

Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height

External electrical cables and cords

Gas Discharge Lamps

Plastics containing Brominated Flame Retardants

weighing > 25 grams (not including PCBs or PCAs

already listed as a separate item above)

Components and parts containing toner and ink,

including liquids, semi-liquids (gel/paste) and toner

Include the cartridges, print heads, tubes, vent

chambers, and service stations.

Components and waste containing asbestos

MF877-00 Page 2

Template Revision C, 30-July-2018

HPE instructions for this template are available at MF877-01

Item Description Notes

Quantity

of items

included

in product

Components, parts and materials containing

refractory ceramic fibers

Components, parts and materials containing

radioactive substances

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components

and materials requiring selective treatment can be removed.

Tool Description

Tool Size (if

applicable)

Screwdriver

T8,T10,PH#1

Tweezers

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Use screwdriver (T8) to loosen up the screw on the cover wall plate then, remove the cover wall plate.

2. Use screwdriver (T10) to loosen up 5 screws on the bottom.

3. Remove the top cover by hand and remove the light pipe.

4. Remove Antenna, PCBA, plastic cover plate, and screw using screwdriver (PH#1).

5. Use screwdriver (PH#1) to loosen up 3 screws on the antenna plate, separate Antenna and PCBA.

6. Use screwdriver (PH#1) to loosen 2 screws on the antenna, remove cable and 2 clips

7. Use Tweezers to remove shielding covers and thermal pads.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items

contained in the product that require selective treatment (with descriptions and arrows identifying locations).

MF877-00 Page 3

Template Revision C, 30-July-2018

HPE instructions for this template are available at MF877-01

1. Use screwdriver (T8) to loosen up the screw on the cover wall plate then remove cover wall plate.

2. Use screwdriver (T10) to loosen up 5 screws on the bottom of product

3. Remove the top cover by hand then remove the light pipe.

MF877-00 Page 4

Template Revision C, 30-July-2018

HPE instructions for this template are available at MF877-01

4. Remove Antenna, PCBA, plastic cover plate, and screw using screwdriver (PH#1).

5. Use screwdriver (PH#1) to loosen up 3 screws on the antenna plate, separate Antenna and PCBA.

6. Use screwdriver (PH#1) to loosen up 6 screws on the antenna, remove cable and 2 clips

MF877-00 Page 5

Template Revision C, 30-July-2018

HPE instructions for this template are available at MF877-01

7. Use Tweezers to remove shielding covers and thermal pads.

Inhaltsverzeichnis

Andere HP Zubehör Handbücher

HP TPA-M002P Bedienungsanleitung

HP 11792A Bedienungsanleitung

HP Model 744 - VME Workstation Referenzhandbuch

HP AA979A - StorageWorks SAN Switch 2/8V Bedienungsanleitung

HP Support Anywhere Bedienungsanleitung

HP Executive Tablet Pen Bedienungsanleitung

HP xp8000 - Digital Projector Anleitung zur Verwendung

HP E1399A Bedienungsanleitung

HP Model 744 - VME Workstation Referenzhandbuch

HP 8517B Gebrauchsanweisung

HP 8081A Service-Handbuch

HP Kayak XA-s Series 02 Bedienungsanleitung

HP ProCurve 1600M Bedienungsanleitung

HP C6050a Bedienungsanleitung

HP C8000 - Workstation - 0 MB RAM Bedienungsanleitung

HP 245161-B22 - 10642 42U Rack Shock Pallet Bedienungsanleitung

HP MCS Bedienungsanleitung

HP MSM415 Bedienungsanleitung

HP L1520 - 15 Inch LCD Monitor Bedienungsanleitung

HP Workstation x1000 Handbuch

HP Digital Pen 250 Bedienungsanleitung

HP p1535a Handbuch

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung