HUANUO HNCPB Bedienungsanleitung

Model: HNCPB

V5.0

CPU Holder Instruction Manual

Thank you for choosing this HUANUO product! At HUANUO we

strive to provide you with the best quality products and

services in the industry. Please share your experience of our

product with others at www.huanuoav.com/reviews if you are

satisﬁed. Should you have any issues, please don't hesitate to

Technical Support:

1-800-556-0533 Mon-Fri 10am - 5pm (PST) (USA) (CAN)

Other Info:

[email protected] (US/CA)

Website:

www.huanuoav.com

Supp

Supplied Parts and Hardware List

Tools Needed (Not lncluded)

IMPORTANT SAFETY INFORMATION

• Please read through these instructions completely before attempting

installation. If you do not understand the instructions or have any concerns or

questions, please contact customer service at [email protected].

• Check package contents against Supplied Parts and Hardware List to assure

that all components were received undamaged. Do not use damaged or defective

parts. If you require replacement parts, contact customer service at

[email protected].

• Not all parts and hardware included will be used.

• Do not use this product for any purpose or in any conﬁguration not explicitly

speciﬁed in this instruction. We hereby disclaim any liability for injury or damage

arising from incorrect assembly, incorrect mounting, or incorrect use of this

product.

A(x1)

CPU Holder

B(x4)

st4.8x16mm

Screw

C(x4)

st4.8x38mm

Screw

D(x4)

Anchor

E(x12)

Pad

F(x4)

Washer

G(x1)

Allen Key

Note:

Only used for concrete block wall

Pencil

Drill 1/8 in.(3 mm)

Wood Drill 1/4 in.(6 mm)

Concrete Drill

Phillips Screwdriver

Step 2 Adjust the Height of the CPU Holder [A]

CAUTION: TO AVOID ANY DAMAGES, PLEASE TAKE OFF CPU

BEFORE MAKING HEIGHT ADJUSTMENT

Step 1 Attach the Pads [E] to the CPU Holder [A]

1. Loosen the preassembled bolt [H1].

2. Pull out and hold the bolt [H2].

3. Adjust the height of the CPU holder [A].

Step 3a For Desk Installation Option

Step 3 Secure CPU Holder

Secure CPU Holder [A] to the Bottom of Desk Using Screws [B]

and Washers [F]

4. Fasten the bolt [H1] and release the bolt [H2] to ﬁx the CPU holder [A] in

place

Note: the height of CPU holder [A] should be greater

or equal to that of CPU

Step 3b For Wood Stud Installation Option

Step 3b-1 Position the CPU

holder [A] at your desired

height. Level the CPU holder

and mark the four holes.

Step 3b-2 Drill 4 pilot holes using a

1/8 in.(3 mm) diameter drill bit. Make sure

the depth is not less than 0.6 in.(15mm).

Secure the two screws [B] into the two top

holes.

Step 3b-4 Secure the CPU

holder [A] using the other

two screws [B]

Step 3b-3 Hang the CPU holder [A]

to the screws [B]

1/8 in.(3 mm)

spacing left

[Not Included]

1/8 in.

(ø3 mm)

0.6 in.(15 mm)

Note: Do not use wall anchor for

wood stud installation

Step 3c For Concrete Wall Installation Option

[Not Included]

Step 3c-1 Position the CPU holder [A]

at your desired height. Level the CPU

holder and mark the four holes.

Step 3c-2 Drill 4 pilot holes using a 1/4

in.(6 mm) diameter drill bit. Make sure the

depth is not less than 1.6 in.(40 mm). Knock

anchors [D] into the wall. Secure the two

screws [C] into the top two anchors [D].

Step 3c-4 Secure the CPU holder [A]

to the concrete wall using the other

two screws [C]

Step 3c-3 Hang the

CPU holder [A] to the

screws [C]

1/4 in.

(ø6 mm)

1.6 in.(40 mm) Note: Be sure the anchors [D] are

seated ﬂush with the concrete

surface.

[Not Included]

1/8 in.(3 mm)

spacing left

Step 4-2

Step 4 Put CPU into the CPU Holder

Step 4-1 Loosen the Knobs [K] to Increase the Width of the CPU Holder [A],

Then Put CPU into the CPU Holder [A]

Adjust the Width of CPU Holder [A] According to the Width of CPU,

Then Tighten the Knobs [K]

Thank you again for

choosing this HUANUO product!

All of us at HUANUO do appreciate your product purchase. We hope

that you are as happy with your product as we designing and

manufacturing it for you. We strive to provide you with the best

quality products and services in the industry. Please share your

experience of our product with others at

www.huanuoav.com/reviews if you are satisﬁed. If you have any

questions please don't hesitate to contact us at

Technical Support:

1-800-556-0533 Mon-Fri 10am - 5pm (PST) (USA) (CAN)

Other Info:

[email protected] (US/CA)

Please check

www.huanuoav.com

for more products and

company information.

Inhaltsverzeichnis

Andere HUANUO Rack & Stand Handbücher

HUANUO

HUANUO HNCM2 Bedienungsanleitung

HUANUO

HUANUO HNLL11 Bedienungsanleitung

HUANUO

HUANUO HNQF2 Bedienungsanleitung

HUANUO

HUANUO HNDSK4 Bedienungsanleitung

HUANUO

HUANUO HNLS07S Bedienungsanleitung

HUANUO

HUANUO HNDS6 Bedienungsanleitung

HUANUO

HUANUO HNTS3S Bedienungsanleitung

HUANUO

HUANUO HNCM12 Bedienungsanleitung

HUANUO

HUANUO HNMS02 Bedienungsanleitung

HUANUO

HUANUO HNSSK4 Bedienungsanleitung

HUANUO

HUANUO HNWSS1 Bedienungsanleitung

HUANUO

HUANUO HNDS8 Bedienungsanleitung

HUANUO

HUANUO HNCM3 Bedienungsanleitung

HUANUO

HUANUO HNKB03 Bedienungsanleitung

HUANUO

HUANUO HNCM12-1 Bedienungsanleitung

HUANUO

HUANUO HNCM1 Bedienungsanleitung

HUANUO

HUANUO HNCM7 Bedienungsanleitung

HUANUO

HUANUO HNCM20 Bedienungsanleitung

HUANUO

HUANUO HNHM4 Bedienungsanleitung

HUANUO

HUANUO HNSSD6 Bedienungsanleitung

HUANUO

HUANUO HNCM18 Bedienungsanleitung

HUANUO

HUANUO HNCM1 Bedienungsanleitung

HUANUO

HUANUO HNPS01 Bedienungsanleitung

HUANUO

HUANUO HNCM17 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung