HunterDouglas SCG 64 Bedienungsanleitung

REV 08 October`10

max 1000 mm

Install the roller blind. Level the side guiding chan-



channel against the bottom of the end cap. Mark the

drilling positions.

Type SCG 64

Fix the side guiding channel (with provided screws)

on the marked position.

Press the cover caps onto the drill holes.

Installation with screw Installation Instruction

Roller Blind

Side Channel Guiding

Installation in recess

         



side guiding channels.

-

side of the bracket. Fix the channel in this position

(with provided screws).

Divide the width between both outer drill holes into

equal sections (in accordance with possibilities).

Pay attention that the maximum distance of 1000

mm between two drill holes will not be exceeded.

Distance between drill holes

X = max.

1000 mm

click

REV 08 October`10

100 mm

Ø 5,5 mm

Ø 10 mm

100 mm

Ø5,5 mm Ø10 mm

!  

end cap. Mark the horizontal position of the screw

with X = 75 mm to the bottom of the end cap.

Fix the clip with provided screw. Snap the other

clips sidewise onto the side guiding channel.

Place the side guiding channel sidewise into the up-

per clip. Level the side guiding channel. Slide a clip

to the lower position. Level the bottom of the clip and

side guiding channel. Mark the hole.

Place the distance plate behind the bracket. Pay at-

tention that the printing should be the same as on

the bracket (L or R). Align the distance plate to the



Divide and mark the other clips with an equal dis-

tance (max 1000 mm). Remove the channel from

the clip. Fix the clips. Place the bottom rail into the

side guiding channel.

Place the side guiding channel above the clips.

Snap the channel into the clips. Fix the left side



Series 5-30, 5-40, 5-100 & 5-120 Arrangement of drill holes

Drill a hole (Ø 5,5 mm) in the groove of the side guid-

"

       #$$  % 

inner hole up to Ø 10 mm.

Drill a hole (Ø 5,5 mm) in the groove of the side

"

#$$&

side the hole diameter has to be 10 mm.

Loose the screw and remove the bottom end cap

'

Wall installation with cap

Side installation in recess

Installation with clip

Andere HunterDouglas Jalousie Handbücher

HunterDouglas

HunterDouglas Silhouette Duolite UltraGlide Bedienungsanleitung

HunterDouglas

HunterDouglas Vignette Traditional Bedienungsanleitung

HunterDouglas

HunterDouglas Silhouette Halo Duolite Stücklistenhandbuch

HunterDouglas

HunterDouglas Solera EasyRise Stücklistenhandbuch

HunterDouglas

HunterDouglas Design Studio Installationshandbuch

HunterDouglas

HunterDouglas Luxaflex PowerView Bedienungsanleitung

HunterDouglas

HunterDouglas Sonnette Bedienungsanleitung

HunterDouglas

HunterDouglas Paramount Headrail Systems Stücklistenhandbuch

HunterDouglas

HunterDouglas RB 500 Bedienungsanleitung

HunterDouglas

HunterDouglas VS 100 Guide rail Wartungs- und Serviceanleitung

HunterDouglas

HunterDouglas Vignette Tiered Bedienungsanleitung

HunterDouglas

HunterDouglas PowerView Bedienungsanleitung

HunterDouglas

HunterDouglas Pirouette PowerView+ Gen 3 Automation Stücklistenhandbuch

HunterDouglas

HunterDouglas Provenance Woven Wood Shades Stücklistenhandbuch

HunterDouglas

HunterDouglas Paramount Betriebsanleitung

HunterDouglas

HunterDouglas Alustra Woven Textures Bedienungsanleitung

HunterDouglas

HunterDouglas Reveal Stücklistenhandbuch

HunterDouglas

HunterDouglas WOODMATES Bedienungsanleitung

HunterDouglas

HunterDouglas RB 500 Sicherheitsleitfaden

HunterDouglas

HunterDouglas 5-151 Bedienungsanleitung

HunterDouglas

HunterDouglas Silhouette A Deux Stücklistenhandbuch

HunterDouglas

HunterDouglas Sonnette Stücklistenhandbuch

HunterDouglas

HunterDouglas PowerView M40T Bedienungsanleitung

HunterDouglas

HunterDouglas Silhouette Nantucket PowerView Gen 3... Stücklistenhandbuch

Beliebte Jalousie Handbücher anderer Marken

Jysk

Jysk ROGEN Bedienungsanleitung

SOMFY

SOMFY 1241752 Bedienungsanleitung

Rollos

Rollos S-Nanorollo V2 Planungshandbuch

Teptron

Teptron Move Bedienungsanleitung

Renson

Renson Outdoor Loggia Sicherheitsleitfaden

Project Source

Project Source CDLF2342W Bedienungsanleitung

Domondo

Domondo PureNight Installationsanleitung

rollease acmeda

rollease acmeda Easy Spring Air Einrichtungshandbuch

IKEA

IKEA KADRILJ Bedienungsanleitung

Hallis Hudson

Hallis Hudson Rolls Super glide Bedienungsanleitung

Benthin

Benthin P1614 Bedienungsanleitung

MV LINE

MV LINE CLARA 015 Bedienungsanleitung

Current

Current E-WAND Leitfaden

weinor

weinor VertiTex ZipR Handbuch

Roto

Roto ZAR M R4/R7 Bedienungsanleitung

SOMFY

SOMFY Movelite WT Series Bedienungsanleitung

Acmeda

Acmeda RF400 Series Bedienungsanleitung

Motura

Motura Pli_353/3 Bedienungsanleitung