IBM 8840 - eServer xSeries 346 Bedienungsanleitung

IBM xSeries 346

Type 8840

User’s Guide

ERserver



IBM xSeries 346

Type 8840

User’s Guide

ER s e r v e r



Note:

Before using this information and the product it supports, read the general information in Appendix B,

“Notices,” on page 39.

Fifth Edition (October 2005)

US Government Users Restricted Rights –Use, duplication or disclosure restricted by GSA ADP Schedule Contract

with IBM Corp.

Contents

Safety ............................v

Chapter 1. Introducing the IBM xSeries 346 Type 8840 .........1

Related documentation ......................1

Notices and statements used in this document..............2

Features and specifications .....................3

What your server offers ......................4

Reliability, availability, and serviceability ................5

IBM Director ..........................6

The UpdateXpress program ....................7

Front view ...........................7

Rear view ...........................9

Server power features ......................10

Turning on the server .....................10

Turning off the server .....................10

Chapter 2. Configuring the server .................13

Using the Configuration/Setup Utility program .............13

Starting the Configuration/Setup Utility program ............14

Configuration/Setup Utility menu choices ..............14

Passwords .........................17

Power-on password .....................17

Administrator password ....................18

Using the ServerGuide Setup and Installation CD ............18

ServerGuide features .....................18

Setup and configuration overview .................19

Typical operating-system installation ................19

Installing your operating system without ServerGuide ..........20

Using the SCSISelect Utility program for Adaptec HostRAID configuration ...20

Enabling the SCSI HostRAID feature ................20

Using the SCSI HostRAID feature to perform aRAID level-0 configuration 20

Configuring the controller ...................20

Using the SCSI HostRAID feature to perform aRAID level-1 configuration 21

Configuring the controller ...................21

Using the SCSI HostRAID feature to perform aRAID level-10 configuration 21

Configuring the controller ...................22

Viewing the configuration ....................22

Using the Boot Menu program ...................22

Configuring the Ethernet controllers .................22

Using the baseboard management controller ..............23

Enabling and configuring SOL using the OSA SMBridge management utility

program .........................23

BIOS update and configuration .................23

Linux configuration .....................24

Microsoft Windows 2003 Standard Edition configuration ........31

Installing the OSA SMBridge management utility program ........32

Using the baseboard management controller utility programs .......34

Using the baseboard management controller configuration utility program 34

Using the baseboard management controller firmware update utility

program ........................34

Using the OSA SMBridge management utility program ........34

Using the SCSISelect Utility program.................35

Starting the SCSISelect Utility program ...............35

©Copyright IBM Corp. 2005 iii

SCSISelect Utility menu choices .................36

Appendix A. Getting help and technical assistance ..........37

Before you call .........................37

Using the documentation .....................37

Getting help and information from the World Wide Web ..........38

Software service and support ...................38

Hardware service and support ...................38

Appendix B. Notices ......................39

Edition notice .........................39

Trademarks ..........................40

Important notes.........................40

Product recycling and disposal ...................41

Battery return program ......................42

Electronic emission notices ....................43

Federal Communications Commission (FCC) statement .........43

Industry Canada Class Aemission compliance statement ........43

Australia and New Zealand Class Astatement ............43

United Kingdom telecommunications safety requirement.........43

European Union EMC Directive conformance statement .........43

Taiwanese Class Awarning statement ...............44

Chinese Class Awarning statement ................44

Japanese Voluntary Control Council for Interference (VCCI) statement ...44

Index ............................45

iv IBM xSeries 346 Type 8840: User’s Guide

Safety

Before installing this product, read the Safety Information.

Antes de instalar este produto, leia as Informações de Segurança.

Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.

Læs sikkerhedsforskrifterne, før du installerer dette produkt.

Lees voordat udit product installeert eerst de veiligheidsvoorschriften.

Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.

Avant d’installer ce produit, lisez les consignes de sécurité.

Vor der Installation dieses Produkts die Sicherheitshinweise lesen.

Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.

Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.

Antes de instalar este produto, leia as Informações sobre Segurança.

Antes de instalar este producto, lea la información de seguridad.

©Copyright IBM Corp. 2005 v

Läs säkerhetsinformationen innan du installerar den här produkten.

Important:

All caution and danger statements in this documentation begin with a

number. This number is used to cross reference an English caution or

danger statement with translated versions of the caution or danger

statement in the IBM Safety Information book.

For example, if acaution statement begins with anumber 1,

translations for that caution statement appear in the IBM Safety

Information book under statement 1.

Be sure to read all caution and danger statements in this

documentation before performing the instructions. Read any additional

safety information that comes with your server or optional device before

you install the device.

Statement 1

Danger

Electrical current from power, telephone, and communication cables is hazardous.

To avoid ashock hazard:

vDo not connect or disconnect any cables or perform installation, maintenance, or

reconfiguration of this product during an electrical storm.

vConnect all power cords to aproperly wired and grounded electrical outlet.

vConnect to properly wired outlets any equipment that will be attached to this

product.

vWhen possible, use one hand only to connect or disconnect signal cables.

vNever turn on any equipment when there is evidence of fire, water, or structural

damage.

vDisconnect the attached power cords, telecommunications systems, networks, and

modems before you open the device covers, unless instructed otherwise in the

installation and configuration procedures.

vConnect and disconnect cables as described in the following table when installing,

moving, or opening covers on this product or attached devices.

To connect:

1. Turn everything OFF.

2. First, attach all cables to devices.

3. Attach signal cables to connectors.

4. Attach power cords to outlet.

5. Turn device ON.

To disconnect:

1. Turn everything OFF.

2. First, remove power cords from outlet.

3. Remove signal cables from connectors.

4. Remove all cables from devices.

vi IBM xSeries 346 Type 8840: User’s Guide

Statement 2

CAUTION:

When replacing the lithium battery, use only IBM Part Number 33F8354 or an

equivalent type battery recommended by the manufacturer. If your system has a

module containing alithium battery, replace it only with the same module type made

by the same manufacturer. The battery contains lithium and can explode if not

properly used, handled, or disposed of.

Do not:

vThrow or immerse into water.

vHeat to more than 100° C(212° F)

vRepair or disassemble

Dispose of the battery as required by local ordinances or regulations.

Statement 3

CAUTION:

When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or

transmitters) are installed, note the following:

vDo not remove the covers. Removing the covers of the laser product could result in

exposure to hazardous laser radiation. There are no serviceable parts inside the

device.

vUse of controls or adjustments or performance of procedures other than those

specified herein might result in hazardous radiation exposure.

Danger

Some laser products contain an embedded Class 3A or Class 3B laser diode. Note the

following. Laser radiation when open. Do not stare into the beam, do not view directly with

optical instruments, and avoid direct exposure to the beam.

Safety vii

Statement 4

≥18 kg (39.7 lb)

≥32 kg (70.5 lb)

≥55 kg (121.2 lb)

CAUTION:

Use safe practices when lifting.

Statement 5

CAUTION:

The power-control button on the device and the power switch on the power supply do

not turn off the electrical current supplied to the device. The device also might have

more than one power cord. To remove all electrical current from the device, ensure

that all power cords are disconnected from the power source.

Statement 8

CAUTION:

Never remove the cover on apower supply or any part that has the following label

attached.

Hazardous voltage, current, and energy levels are present inside any component that

has this label attached. There are no serviceable parts inside these components. If you

suspect aproblem with one of these parts, contact aservice technician.

viii IBM xSeries 346 Type 8840: User’s Guide

Andere Handbücher für 8840 - eServer xSeries 346

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IBM Server Handbücher

IBM

IBM x3455 - System - 7984 Bedienungsanleitung

IBM

IBM System x3250 Bedienungsanleitung

IBM

IBM xSeries 335 Bedienungsanleitung

IBM

IBM Power 750 Express Installationsanleitung

IBM

IBM PS700 Bedienungsanleitung

IBM

IBM 866631Y - Netfinity 7100 - 8666 Betriebsanleitung

IBM

IBM BladeCenter GPU Expansion Blade Bedienungsanleitung

IBM

IBM 8686 - Eserver xSeries 360 Betriebsanleitung

IBM

IBM BladeCenter QS20 Bedienungsanleitung

IBM

IBM 71413SU - System x3950 M2 Service-Handbuch

IBM

IBM x3450 - System - 7948 Bedienungsanleitung

IBM

IBM x3650 - System M2 - 7947 Bedienungsanleitung

IBM

IBM System x3650 M5 Montage- und Wartungsanleitung

IBM

IBM eServer 380 xSeries Produktinformationsblatt

IBM

IBM Power 775 Bedienungsanleitung

IBM

IBM Power Systems 9043-MRX Bedienungsanleitung

IBM

IBM @Server pSeries 630 6C4 Handbuch

IBM

IBM 9009-41G Bedienungsanleitung

IBM

IBM HS40 - BladeCenter - 8839 Bedienungsanleitung

IBM

IBM System x3400 M3 Types 7378 Bedienungsanleitung

IBM

IBM BladeCenter HS23 Bedienungsanleitung

IBM

IBM eserver xSeries 350 Produktinformationsblatt

IBM

IBM X 330 Series Bedienungsanleitung

IBM

IBM Power System LC922 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung