IBM E Server 440 x Series Betriebsanleitung

xSeries 440

16-way Configuration Supplemental Information

ERserver



xSeries 440

16-way Configuration Supplemental Information

ER s e r v e r



Note: Before using this information and the product it supports, read the general information in “Notices”,

on page 23.

Second Edition (July 2003)

US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract

with IBM Corp.

Contents

Safety ............................v

Chapter 1. Introduction ......................1

Related publications .......................1

The 16-way configuration .....................2

16-way considerations......................2

16-way terms .........................2

Chapter 2. Configuring and cabling the servers ............3

Configuring the static partition ....................3

Cabling the servers.......................5

Cabling an RXE-100 ......................8

Chapter 3. Operating Information .................11

Turning on and off your 16-way configuration ..............11

Using the locator light ......................11

Using ports and connectors ....................11

Working with cables .......................12

Configuring static partitions ....................12

Creating a static partition ....................13

Deleting a static partition ....................13

Chapter 4. Troubleshooting....................15

Diagnostic tools overview .....................15

POST beep code descriptions ...................15

Verifying the SMP Expansion port cabling ...............16

Verifying the RXE Expansion port cabling ...............17

Verifying the RXE Management port cabling ..............18

Verifying the Remote Supervisor Adapter cabling ............18

Starting the diagnostic programs ..................19

Troubleshooting charts ......................19

Appendix. Notices .......................23

Edition notice .........................23

Trademarks ..........................24

Important notes.........................24

Product recycling and disposal ...................25

Battery return program ......................25

Electronic emission notices ....................26

Federal Communications Commission (FCC) statement .........26

Industry Canada Class A emission compliance statement ........26

Australia and New Zealand Class A statement ............26

United Kingdom telecommunications safety requirement.........26

European Union EMC Directive conformance statement .........26

Taiwanese Class A warning statement ...............27

Chinese Class A warning statement ................27

Japanese Voluntary Control Council for Interference (VCCI) statement . . . 27

Power cords ..........................27

Index ............................31

iv xSeries 440: 16-way Configuration Supplemental Information

Safety

Before installing this product, read the Safety Information.

Antes de instalar este produto, leia as Informações de Segurança.

Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.

Læs sikkerhedsforskrifterne, før du installerer dette produkt.

Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.

Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.

Avant d’installer ce produit, lisez les consignes de sécurité.

Vor der Installation dieses Produkts die Sicherheitshinweise lesen.

Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.

Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.

Antes de instalar este produto, leia as Informações sobre Segurança.

Antes de instalar este producto, lea la información de seguridad.

Läs säkerhetsinformationen innan du installerar den här produkten.

Statement 1:

DANGER

Electrical current from power, telephone, and communication cables is

hazardous.

To avoid a shock hazard:

vDo not connect or disconnect any cables or perform installation,

maintenance, or reconfiguration of this product during an electrical

storm.

vConnect all power cords to a properly wired and grounded electrical

outlet.

vConnect to properly wired outlets any equipment that will be attached to

this product.

vWhen possible, use one hand only to connect or disconnect signal

cables.

vNever turn on any equipment when there is evidence of fire, water, or

structural damage.

vDisconnect the attached power cords, telecommunications systems,

networks, and modems before you open the device covers, unless

instructed otherwise in the installation and configuration procedures.

vConnect and disconnect cables as described in the following table when

installing, moving, or opening covers on this product or attached

devices.

To Connect: To Disconnect:

1. Turn everything OFF.

2. First, attach all cables to devices.

3. Attach signal cables to connectors.

4. Attach power cords to outlet.

5. Turn device ON.

1. Turn everything OFF.

2. First, remove power cords from outlet.

3. Remove signal cables from connectors.

4. Remove all cables from devices.

vi xSeries 440: 16-way Configuration Supplemental Information

Statement 2:

CAUTION:

When replacing the lithium battery, use only IBM Part Number 33F8354 or an

equivalent type battery recommended by the manufacturer. If your system has

a module containing a lithium battery, replace it only with the same module

type made by the same manufacturer. The battery contains lithium and can

explode if not properly used, handled, or disposed of.

Do not:

vThrow or immerse into water

vHeat to more than 100°C (212°F)

vRepair or disassemble

Dispose of the battery as required by local ordinances or regulations.

Statement 3:

CAUTION:

When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or

transmitters) are installed, note the following:

vDo not remove the covers. Removing the covers of the laser product could

result in exposure to hazardous laser radiation. There are no serviceable

parts inside the device.

vUse of controls or adjustments or performance of procedures other than

those specified herein might result in hazardous radiation exposure.

DANGER

Some laser products contain an embedded Class 3A or Class 3B laser

diode. Note the following.

Laser radiation when open. Do not stare into the beam, do not view directly

with optical instruments, and avoid direct exposure to the beam.

Safety vii

Statement 4:

≥18 kg (39.7 lb) ≥32 kg (70.5 lb) ≥55 kg (121.2 lb)

CAUTION:

Use safe practices when lifting.

Statement 5:

CAUTION:

The power control button on the device and the power switch on the power

supply do not turn off the electrical current supplied to the device. The device

also might have more than one power cord. To remove all electrical current

from the device, ensure that all power cords are disconnected from the power

source.

viii xSeries 440: 16-way Configuration Supplemental Information

Inhaltsverzeichnis

Andere IBM Server Handbücher

IBM

IBM System x3650 Type 7979 Bedienungsanleitung

IBM

IBM Power System S821LC Bedienungsanleitung

IBM

IBM 7870B4U Bedienungsanleitung

IBM

IBM eserver pSeries 690 Bedienungsanleitung

IBM

IBM eServer xSeries 335 Type 8676 Bedienungsanleitung

IBM

IBM 88784RU Bedienungsanleitung

IBM

IBM System x3755Types 7163 Bedienungsanleitung

IBM

IBM Power 750 Express Betriebsanleitung

IBM

IBM Netfinity 5000 Betriebsanleitung

IBM

IBM Power Systems Series Bedienungsanleitung

IBM

IBM System X Series Bedienungsanleitung

IBM

IBM Power System AC922 Bedienungsanleitung

IBM

IBM eServer 330 xSeries Bedienungsanleitung

IBM

IBM eServer xSeries 226Type 8648 Bedienungsanleitung

IBM

IBM @Server pSeries 630 6C4 Handbuch

IBM

IBM System x3250 Bedienungsanleitung

IBM

IBM eServer xSeries 345 Type 8670 Bedienungsanleitung

IBM

IBM 8677 - BladeCenter Rack-mountable - Power... Bedienungsanleitung

IBM

IBM 306m - eServer xSeries - 8849 Bedienungsanleitung

IBM

IBM 8676 - Eserver xSeries 335 Bedienungsanleitung

IBM

IBM 8204-E8A Bedienungsanleitung

IBM

IBM 884015U Betriebsanleitung

IBM

IBM System x3690 X5 Bedienungsanleitung

IBM

IBM 8203-E4A Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung